• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.383-389
• /
• 2011

At the design stage, it is very important to know the ship maneuvering characteristics from the view point of ship performance and for the safety of navigation. IMO only gives some criteria for ships in full load even keel condition. However, the ship generally is operated not only in full load condition but also in half load condition or ballast condition. Therefore we must estimate the ship maneuvering in different loading condition to ensure that the ship will satisfy with IMO rules and navigate safely in every condition. In this paper, we have investigated the maneuvering characteristics of a ship by simulation and experiments with real ship. By comparing with the results of simulation, the real ship tests conform with simulation test and previous researches. Therefore, the method base on real data is well done to estimate the ship maneuvering in different loading conditions. The change of ship's manoeuverability accoriding to ship's operation conditions was estimated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.52-53
• /
• 2021

항로표지는 선박이 항로를 안전하게 운항함에 있어서 중요한 역할을 한다. 이 연구에서는 빅데이터 기반으로 AIS 항적분석 모듈, 항로표지 적합성 평가 모듈, 항로표지 배치 검증 모듈 개발을 하고 이를 통합한 항로표지 적합성 평가 및 최적배치 서비스를 개발하고자 한다. 이에 최적배치 서비스 개발을 위한 로드맵과 모듈 개발을 위한 추진 전략 방향성을 구성하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.100-106
• /
• 2022

Ships are built according to the purpose and operated with individual goals. Operational goals are reflected in the design of the ships and become the main criterion for determining the required ship ability. In general, cargo ships and passenger ships are objectively evaluated in terms of the operation part of the ship and the capacity part of the cargo or passenger, centering on their transportation ability. In consideration of the required ship ability, the built ship can expect effects such as economic feasibility and eco-friendliness in addition to basic characteristics such as stability. Accordingly, the concept of ship ability is expected to be effectively used in the field of training-only ship management by each institution, which plays a pivotal role in training ship-officers. In this study, the basic direction was verified for the ship ability evaluation criteria of training-only ships through the analysis of the internal space of two training-only ships of the Korea Institute of Maritime and Fisheries Technology, which were recently built with a time lag. In the process of building training-only ship or general-purpose training ship, the possibility of using the ship ability standards in securing budget and designing was derived.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.7
• /
• pp.810-819
• /
• 2020

Recently, the demand for liquefied gas has been increasing for various reasons, including environmental problems, and as a result, transportation of liquefied gas through a ship is increasing, and several terminals are also being constructed to accommodate it. The size of the terminal to be constructed shall follow the result if the target ship is clearly determined. Otherwise, the size of the vessel that the terminal intends to accept shall be determined, and then, the dimensions of the vessel given in the regulations or standards shall be used. In this regard, it was found that the main dimensions of the proposed vessels are substantially different from those actually operating and the standard for large-sized vessels has not been established in the process of determining the size of the target vessel by using the "Port and Fishing Port Design Standards" and commentary(2017), which recently is most commonly used as port design criteria in order to construct the liquefied gas terminal. Because of these problems, a revision of the standard for the major dimensions of liquefied gas carriers was proposed through an analysis of the current status of ships in service, as there could be many differences between interested parties in determining the size of the target ships and terminals and evaluating the safety of terminals. It is expected that the proposed revision will be used as a more appropriate and realistic criterion for determining the size of ships and terminals in the future and will prevent unnecessary terminal construction costs.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.5
• /
• pp.853-861
• /
• 2010

Experimental conditions are set with environmental factors which can affect ship navigation. In FTS simulation, infinite simulation can be theoretically tested with no time constraint but the simulated result with the same experimental condition is repeated due to mathematical model. RTS simulation can give more resonable results but costs at lest 30 minutes for only experimental time. The mixture of two simulation methods using probability density function has been proposed: some of experimental conditions in which ship-handling is most difficult are selected with FTS and are tested in RTS. It has drawback that it does not consider the navigation route but aggregated track index. In this paper, anomaly detection approach is suggested to select some experimental conditions of FTS simulation which are most difficult in ship-handling during the navigation route. An empirical result has been shown.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.135-137
• /
• 2019

In recent years, the need for ship-to-ship has emerged around the world as the volume of tanker carriers increases. In the case of STS mooring, a safety review should be carried out on other standards since the characteristics are different from the mooring at a typical wharf. However, there is no separate standard about STS in Korea. Therefore, in this study, STS mooring simulation and sensitivity analysis were performed using OPTIMOOR program, a commercial numerical analysis program, to identify STS mooring characteristics. The target sea area is modeled at D2 anchorage of Yeosu Port in Korea, and modeling of the target ship is selected as the case of VLCC-VLCC. Based on this, we tried to establish the standard for STS mooring safety evaluation. Numerical simulation results show that the STS mooring changes depending on the ship load condition, weather condition(wave period and wave height), encounter angle and pre-tension of mooring line. In addition, a risk matrix was created to set the safe external force range in the sea area. It is expected that the mooring characteristics of the STS can be grasped by this result and contribute to the revision of the mooring safety assessment standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.4
• /
• pp.348-357
• /
• 2024

Maneuvering performance is crucial for fishing vessels, especially under operational conditions that involve frequent course changes and weight variations due to catch. Small vessel accidents account for approximately 60% of maritime incidents as of 2022, mainly attributed to collisions and stranding accidents due to insufficient maneuvering performance. Especially, accidents that occur on small vessels less than 10 tons account for about 65% of all accidents. The absence of international standards presents challenges in accurately evaluating the maneuvering performance of small vessels. In this study, a 4.99-ton small fishing vessel was selected as the target, and a 3d-cad model was created. The commercial numerical analysis program STAR-CCM+ was employed to establish a simulation environment for the vessel's maneuvring motion. Based on this standard loading conditions and weight distribution were considered, 10° / 10°, 20° / 20° zigzag tests and 35° turning test were conducted. The results revealed a tendency for decreased yaw and course-keeping performance and improved turning performance as the hull weight increased. However, in partial arrival and full load departure condition, the manoeuvering performance were relatively poor. Based on this, the need for evaluation of maneuvering and standardized criteria of maneuvering performance for safe navigation of small vessels is presented. Furthermore, it is expected that the evaluation results of maneuvering performance in this study can serve as fundamental data for establishing criteria for evaluating the maneuvering performance of small vessels.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.269-274
• /
• 2011

The purpose of hull stress monitoring system(HSMS) is to lead hull structure to be safer at lower cost. We proposed a hull stress monitoring system for leisure boats using fiber-optic bragg grating(FBG) strain sensor. Fiber optic sensors are well suited for structure monitoring system, due to their ability to withstand harsh environments, immunity to electromagnetic interference, and reduce cabling installation cost when employing wavelength multiplexing. This paper presents an overview of current research and design of hull stress monitoring system for leisure boats.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.462-469
• /
• 2023

In this study, we propose a method for evaluating the risk of collision between ships to support determination on the risk of collision in a situation in which ships encounter each other and to prevent collision accidents. Because several uncertainties are involved in the navigation of a ship, must be considered when evaluating the risk of collision. We apply the Dempster-Shafer theory to manage this uncertainty and evaluate the collision risk of each target vessel in real time. The distance at the closest point approach (DCPA), time to the closest point approach (TCPA), distance from another vessel, relative bearing, and velocity ratio are used as evaluation factors for ship collision risk. The basic probability assignments (BPAs) calculated by membership functions for each evaluation factor are fused through the combination rule of the Dempster-Shafer theory. As a result of the experiment using automatic identification system (AIS) data collected in situations where ships actually encounter each other, the suitability of evaluation was verified. By evaluating the risk of collision in real time in encounter situations between ships, collision accidents caused by human errora can be prevented. This is expected to be used for vessel traffic service systems and collision avoidance systems for autonomous ships.

• Journal of Navigation and Port Research
• /
• v.43 no.1
• /
• pp.9-15
• /
• 2019

Mooring bollards are the mandatory facility in ports for they are the objects used to fasten the ship to its position at the berth. All the mooring bollards were installed following suggested sizes, numbers, materials and shape of installation according to Port and Fishing Design Standards. However, Korea has no management standard for use of mooring bollards to safety in ship berthing. In this research, the installation standard for mooring bollards including the holding power applied to mooring bollards in berthing was studied. Also, the performance of mooring bollards for minimum safety guarantee in berthing based on research of various specification by their sizes was analyzed. The analysis on mooring bollards was examined by each power on mooring bollards from the applied force in berthing divided into horizontal and vertical direction in order to examine the performance of domestic mooring bollards, the limit force is calculated based on detailed specification research result. As a result, the working stress according to the towing force was found to be at least 150Mpa and it was evaluated to be 60% of the limit strength. Also, by comparing each forces, the appropriateness was examined and the specification of maximum capability calculated. This performance evaluation method based on detail specification of mooring bollards will be expected to be useful to examine the appropriateness of mooring bollards for various types of vessel in berthing and to develop maintenance and management standard through the performance change evaluation referring to mooring bollard detailed specification changes.