• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.613-621
• /
• 2016

This research connected network equipment, including CCTV, PAGA, IP-PBX, and Legacy, in order to enable the operation and configuration of internal IP-based network equipment in maritime plants and vessels, both in the field and from remote places, and to allow for the support of remotely controlling such equipment. It also realized an operating program for the integrated network equipment management system to enable the monitoring and control of equipment status, operation condition, and notifications from distant places. By applying the operating program to satellite stations and vessels sailing on the sea, a performance test was conducted to evaluate data loss and transmission/reception delay in the communication section between the land and vessels. As a result, this research verified the normal operation of CCTV control and of real-time monitoring and control of the network equipment, including PAGA, IP-PBX, and Legacy under the FBB and MVSAT environments. It was observed that the transmission of CCTV video images with a large volume of data as well as the transmission and reception of voice data were found to be slightly delayed, indicating the need to develop technology to compress and convert data for real-time transmission and reception.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.591-598
• /
• 2002

In the ship structural design, the material cost of hull weight and the overall cost of construction processes should be minimized considering safety and reliability. In the past, minimum weight design has been mainly focused on reducing material cost and increasing dead weight reflect the interests of a ship's owner. But, in the past experience, the minimum weight design has been inevitably lead to increasing the construction cost. Therefore, it is necessary that the designer of ship structure should consider both structural weight and construction cost. In this point of view, multi-objective optimization technique is proposed to design the ship structure in this study. According to the proposed algorithm, the results of optimization were compared to the structural design of actual VLCC(Very Large Crude Oil Carrier). Objective functions were weight cost and construction cost of VLCC, and ES(Evolution Strategies), one of the stochastic search methods, was used as an optimization solver. For the scantlings of members and the estimations of objectives, classification rule was adopted for the longitudinal members, and the direct calculation method, GSDM(Generalized Slope Deflection Method), lot the transverse members. To choose the most economical design point among the results of Pareto optimal set, RFR(Required Freight Rate) was evaluated for each Pareto point, and compared to actual ship.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.286-294
• /
• 2021

The International Maritime Organization (IMO) has been seeking measures to prevent climate change caused by shipping and actively discussing the initial strategy of reducing ship greenhouse gas emissions adopted in 2018. Member states are proposing various reduction measures in the IMO's 5th International Working Group on the Reduction of Greenhouse-gas emissions. However, each member country's method of measuring impact assessment differs, making it impossible to objectively compare impact assessment by country. As such, various measures have been proposed by each country to reduce greenhouse gas emissions, and it is necessary to determine a standard impact assessment measurement method that can be applied to all countries before 2023, when IMO's greenhouse gas reduction strategy is implemented. Therefore, this study seeks to develop detailed guidelines for impact assessment to objectively compare the impact assessment results of ships' greenhouse gas reduction measures. Drawing detailed guidelines that can compare the effectiveness of each country's reduction strategies will enable the IMO leading marine environment GHG reduction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.282-287
• /
• 2009

As current international guideline and IMO regulation give severe restrictions for ships to manage ballast water to reduce unintentional organism transfers, several ballast water treatment systems recently have been being developed together with filtration. That is because discharging ballast water from ships causes many pollutions by foreign biological invasive species. The primary treatment system being considered in this study was based on fine screen filtration technology applied to ballast water filter in ballast tank in order to reduce the load of ballast water treatment system. New ballast water filtration system was invented and analysed. The structural stress and strain analysis for ballast filtration systems which are current and invented filters were carried out using UGS and Ansys. The results showed that the structure of current filtering module was not designed to meet the requirement of sea water filtration during ballasting operation. The studies also showed that the invented design of filtration system equipped with back washing and automatic scrapper for eliminating cake of bio-species might be a potentially effective technology for ballast water management of ship's ballast tank.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1024-1029
• /
• 2012

As DME (Dimethyl ether) is the one of the future possible massive energy sources synthesized from natural gas, KOGAS has been doing to obtain overseas resources to meet the domestic needs. and tried to build new DME FPSO ship. This paper presents that it can help for the DME storage tank designers and storage management engineers doing proper work by understood the evaporation phenomena and pressure change of DME by thermal intake in storage tank. The experimental result shows that the evaporation rate and pressure are increased with higher liquid filling level. The proper DME liquid filling level in tank is obtained as lower than full 98% volume of tank in case of storing longer than a day, because the pressure is increased rapidly with full 98% filled level of storage tank.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.6
• /
• pp.773-778
• /
• 2011

The International Maritime Organization(IMO) could try to adopt more severe amendment to prevent any air pollution from various waste materials by marine incinerator. This study is to analyse the performance improvement through Ansys CFD about new invented system which has three flue-gas discharge channels and sub-ejector installed in the dischage channel in order to evacuate flue-gas well from the combustion chamber. The results showed that the discharge temperature of flue-gas was below the regulated value of IMO by the multi-channels, and the sub-ejector system installed in the discharge channel was highly effective one to improve the flue-gas discharge ability.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.1-5
• /
• 1987

어떤 산업이든 기계공업이 관여되지 않는 분야가 없듯이 공작기게가 관여되지 않는 기계공업은 생각할 수 없다. 이와같이 공작기계는 <기계를 만드는 기계> 라는 점에서 모든 산업분야의 근간을 형성하고 있으므로 공작기계의 품질과 성능은 곧 한나라의 기술수준을 가늠하는 척도로서 대표된다고 하여도 과언은 아 니다. 오늘날 선진국들은 수요자가 요구하는 다양한 초정밀공작기계까지도 만들고 있다. 크게는 우주개발에 서 항공기, 선박 및 자동차생산을 위시하여 건설장비, 전자 및 광학, 정밀화학, 각종 시험기기 등 공작기계의 손이 미치지 않은 곳이 없다. 이렇게 공작기계는 전산업에 걸쳐 크게 영향을 주고 있으며, 특히 최근의 산업 화 추세가 점차 자동화, 무인화, 초정밀첨단산업으로 비약함에 따라 공작기계의 역할은 더욱더 중요시되고 있 다. 우리나라 공작기계공업은 1960 년대의 이전 극히 영세한 중소기업중심의 보수공작기계부품 생산형태에서 1960 년대 후반부터 일부 범용기종의 생산이 시작되었으나 보다 본격화한 것은 1973 년 정부의 중화학공업육성 시책에 따라 대기업의 대거 참여로 공작기계제조업은 시설, 자산, 경영면에서 대형화 하였고, 동시에 선진국의 최신기술과 시설을 적기에 도입하므로써 품질향상, 신제품개발, 수출참여 등 공작기계공업 발전에 일대 전기를 마련하였다. 특히 '85 년에 들어서면서부터 3 저의 여파로 국내 자동차산업의 호황, 전자, 기계 및 관련수요 산업의 설비투자와 시설개체에 힘입어 공작기계생산도 활발하기 시작하여 그 어느때보다 생산기반혁신을 위한 구조적 대응책이 절실해지고 있다. 따라서 공작기계공업의 당면과제는 지속적인 기술개발과 품질향상으로 국산 화율을 제고시켜야 함은 물론, 이를 양산화하여 명실공히 선도산업으로서의 위치를 굳히고, 적어도 기계류의 수입국에서 기계류의 수출국으로 기치를 든 탈바꿈을 할때 비로소 불균형이 없는 흑자시대는 도래할 것이다.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.939-945
• /
• 2011

We show a new scheme and implementation of maritime data communication systems for GMDSS ship which performs e-Navigation and removes the functional limitation of those systems through comparing to service fee, call processing reliability, and bit rates of all of those systems within communication range at sea. We confirmed available each frequency band communication and application services at sea by experimental result with proposed new system, MF/HF band being useful to a short text message service, VHF band to 9600bps email service, Fleet Broadband Maritime Satellite system to one or more Mbps multimedia service each.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.299-303
• /
• 2004

In this paper, it is presented a level sensor for measuring a level of the contents of cargo tank using frequency modulated continuous wave(FMCW). The frequency range is 10∼11 GHz, the radar cross section(RCS) of target is 0.8 ㎡ of metal plate. the experiment is performed in laboratory and open ground, the sweep time of the signal is 100 ms, the pyramidal horn antenna of about 20 dBi gain is used, and input power of antenna is about 5 dBm. the beat frequency according to the target moving to 40 m is measured. There is a good agreement between measured and calculated results. But the resolution of the FMCW radar is measured about 10 cm due to nonlinear of voltage controlled oscillator(VCO).

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.413-420
• /
• 2004

The Busan New harbor will be opened by 2011, after which it is expected that the marine traffic volume around this area would Increase significantly and that very large ships such as 12,000 TEU container ships would come into the port. Therefore, it is necessary to build a new ships' routeing by considering these factors. In this paper, environmental circumstances, marine traffics, and the preceding studies have been reviewed and ships' routeing is proposed through experts' opinions and Delphi technique. For the purpose of validation, the proposed ships' routeings are reviewed by several guidelines on the ships' routeing and through simulation studies.