• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.66-73
• /
• 2003

To investigate the availability of solidified wastes as resource, wastewater sludge, waste gypsum and fly ash were mixed and the results with various mixing ratios are as follows. Compressive strength turned out to be increasing as the amount of waste gypsum increases, keeps longer curing inhibition, and higher forming Pressure under the conditions of waste gypsum/sludge ratio 0.31-0.45, and 0.9kg cement as 15% and 1.2kg cement as 20% of total amount. Solidified agent under the fly ash/sludge ratio 0.45, 0.6, compressive strength seemed to be higher than standard one which means solidified wastes with these conditions could be applicable in real life. These results inform that concentrations of the leachate $Cr^{+6}$, Cu, Zn, Cd, Pb solidified matrix, containing low concentration of heavy metal, were cured with/without enough time it still will cause adverse effect on nature environment and application of heavy metal sequester must be needed to reuse industrial wastes from incineration plant solidified matrix. Total cost price, when considering manufacturing capability of the facilities for resourcerizing as 18,000ton was presented 678,664,000 won, as it were, manufacturing cost price was 37,704 won per ton. The results as above has shown that it's possible to use the mixture of waste gypsum/sludge, fly ash/sludge, cement, additions, and solidification matter as substitute of materials like brick, block, interlocking which has proper compressive strength of KS L 5201 and KS F 4004.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.406-409
• /
• 2007

This paper proposes an algorithm that predicts current electrostatic charge in a factory. The algorithm based on LSM(Least Square Method) dynamically takes the number of sample while calculating the value of electrostatic charge. The simulation results show that the proposed algorithm gains 73.18161 standard deviation with 95% trust probability and is better than conventional algorithm. We design the electrostatic prediction embedded system based on pxa255 with the proposes algorithm.

• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.51-59
• /
• 1996

The purpose of this study was to evaluate the partial oxidation of the biological treatment plant effluents using Fenton's reagent as a pretreatment step prior to a tertiary biological oxidation of these effluents. Fenton's reagent was evaluated as a pretreatment process for inhibitory or refractory organics. Based on the Fenton oxidation system, the petrochemical wastewater treatment plant effluent was shown to have significant improvement in toxicity after oxidation with hydrogen peroxide. For example, at ranee of 42 ∼ 184 mg/L COD of petrochemical plant effluents, the COD removal efficiencies were from 38.2% to 60.1% after reaction with hydrogen peroxide 200 mg/L and Fe2+ 100 mg/L and reaction time was 30 minutes. The total TOC reduction were about 15.8∼22.4% with same test condition and difference between the overall removal rate and BOD/COD ratio after Fenton's oxidation estabilished in the biodegradation and otherwise meets the discharge standard or reuse for cooling tower make-up water.

• Resources Recycling
• /
• v.13 no.1
• /
• pp.14-21
• /
• 2004

Spent catalysts containing platinum were generated in petroleum refinery and other chemical industries. The reclamation of platinum metals from such wastes has long been attempted in view of their rare, expensive and indispensable nature. In this study, the recovery of platinum from petroleum catalysts was attempted by a method consisting mainly of dissolving alumina carrier with sulfuric acid thereby concentrating insoluble platinum. Also, platinum dissolved partially in sulfuric acid was recovered by a cementation method using aluminum metal as a reductive agent. The effect of temperature, time, concentration of sulfuric acid, and pulp density on the dissolution of carrier was investigated. When the carrier of platinum catalyst was $\Upsilon-Al_2$O$_3$ about 95% alumina was dissolved in 6.0 M sulfuric acid at $100^{\circ}C$ for 2 hours. When the carrier was the mixture of $\Upsilon-Al_2$$O_3$ and $\alpha$-$Al_2$$O_3$ about 92% was dissolved after 4 hours. As a result, more than 99% of platinum could be recovered by this method and aluminum sulfate was also obtained as byproduct.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.100-101
• /
• 2013

가스 터빈, 석유 화학 공장 등에 널리 사용되고 있는 합금들은 IGCC 분위기에서 심각한 부식이 야기된다. 특히 고온에서 가스터빈 재료로 사용되는 초내열 합금 등도 열악한 고온 황화분위기에서는 열악한 내부식성을 보였다. 따라서 이러한 조건에서 견딜 수 있는 재료의 개발이 필요하다. 일반적으로 알려진 내부식성 증가 방법은 내부식성 합금원소 첨가와 재료 표면에 직접 코팅을 하는 방법이 있으며, 본 연구에서는 고온의 $H_2S$ 가스 분위기에서 Pack cementation으로 Al과 Cr 확산코팅 시킨 시편을 이용하여 부식실험을 실시하여 부식 특성을 살펴보았다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.196-196
• /
• 2000

This paper presents an approach for modeling of the generation of a set of credible accident scenarios for a petrochemical plant, which will be used to perform quantitative hazard assessments such as the consequence assessment, FTA or ETA. This approach is carried out in ways of identifying, classifying a set of major components and elements for scenarios generation by analysis of the informations on various actual accidents, and thus setting priorities of both factors of likelihood and consequence on each component or element identified.

• Membrane Journal
• /
• v.1 no.1
• /
• pp.24-33
• /
• 1991

합성고분자막을 이용하여 액체혼합물을 분리하는 공정은 오래전부터 알려져 왔다. 바다물로부터 역삼투법이나 전기투석법을 이용하여 탈염하는 공정이라든지 한외여과 또는 정밀여과법을 이용하여 초순수를 제조하는 공정등은 현재 대단한 기술적, 상업적 의미를 갖으며 산업적으로 발전하고 있다. 더욱 최근에는 합성고분자막이 여러 기체혼합물 분리에 응용되고 있다. 예를 들면 석유화학 폐가스나 암모니아 공장에서 수소의 회수나 공기중의 산소나 질소의 부화등은 막이 아주 유용한 도구로 사용되어 온 두가지 중요한 분야이다. 고분자막이 특정한 물질분리에 맞도록 고안될수 있게 된 이래로 재래식 방법으로는 곤란한 분리문제들이 막공정에 의해 다루어질수 있게 되었다. 이같은 문제중 하나가 폐수중 유기용제등 유기물의 제거이다. 특히 할로겐화 유기물, 살충제, 농약등 오래전부터 독극물로 알려져온 물질들을 폐수로 부터 제저하는데 많은 노력이 경주되어 왔다. 이러한 연구에도 한외여과법이나 역삼투법등의 막분리공정이 응용되어 보고된 바 있다.

• 전기의세계
• /
• v.45 no.9
• /
• pp.9-17
• /
• 1996

1970년 미국의 코닝글라스사(Corning Glass Company)에서 광섬유가 최초로 제조된 이래 광섬유는 통신분야에 많은 공헌을 해오고 있다. 1976년 Kinsley, Davies 등에 의해 광섬유를 이용한 전기적 위상변이 효과가 발표된 이후로 광섬유 특성을 이용한 센서연구가 많이 진행되어 왔다. 즉, 광파이버의 실현과 반도체 레이저와 발광 및 수광 다이오드의 성능 향상에 의하여 광파이버 응용 계측 기술이 현저하게 진보하여 그 다양성과 실현성도 두드러지게 증가되었다. 이것은 레이저와 수광소자 등의 광소자의 개발, 마이크로컴퓨터를 비롯한 전자기술의 진보, 또한 최근의 전력 계통과 철강, 석유 화학 등의 각종 공업 플랜트의 대규모화, 고도화에 따른 고품위의 계측 제어시스템에 대한 수용의 증대에 의한 것이다. 이에 따라서 광대역, 저손실, 고절연성, 내잡음성, 안전방폭성 등이 우수한 광파이버를 신경망으로 하는 광파이버 응용 계측 제어 시스템이 공장자동화에 있어서 중요한 역할을 담당하게 될 것이다. 이의 설계와 제어를 위해 가장 중요한 부분은 정보 수집을 하는 센서 즉, 광속도, 회전 각속도 등 많은 종류의 광섬유 센서의 연구 개발이 미국, 일본, 유럽 및 국내의 여러 기관에서도 게속적인 연구가 진행되고 있으며, 부분적으로 서서히 실용화되어 가고 있다[3-4].

• Fire Science and Engineering
• /
• v.7 no.1
• /
• pp.17-29
• /
• 1993

The method has been proposed for the risk assessment of petro-chemical plant, specially which can evaluate relative risk levels on the materials and process-es. The each potential risk of materials and processes are derived numerically and combined these values, finally Fire and Explosion Index was found. Material factor was evaluated with the flammability and the reactivity and process factor with emprical factor called penalty. This F&EI can be performed for relative risk assesment at the whole plant and directely applicable at the line.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1644-1652
• /
• 2022

In the case of safety training where practical training is impossible due to risk problems, training contents using realistic media such as virtual reality or augmented reality are becoming a new alternative. In this paper, we propose a smoke modeling method that can be applied to safety-training contents implemented with realistic media technology. When an accident occurs in a hazardous area such as a petrochemical plant, visibility is not secured due to gas leakage and fire. In order to create such a situation, it is important to realistically express smoke. The proposed method is a smoke model implementation technique that can be effectively applied to the background of complex passages and devices such as petrochemical plants. In the proposed method, the smoke is expressed using volumetric rendering in the post-processing stage for the resulting image of scene rendering. Implementation results in the background of the factory show that the proposed method produces models that can express the smoke realistically.