• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.295-303
• /
• 2006

To provide microbial information for the safety of agricultural production, the presence of enterotoxin genes and antibiotic susceptibility of 14 isolated Staphylococcus aureus (11.7%) strains were investigated using PCR-based methods and disk diffusion method, respectively. Among enterotoxin-encoding genes, sea was detected from two isolates (14.3%), sea and sed genes were co-detected from three isolates (21.4%), and sea, sed, and see genes in seven isolates (50.0%), whereas seb, sec, and tsst were not detected in any isolate. Nine (64.3%), eight (57.1%), six (42.9%), two (14.3%), and one (7.2%) isolates were resistant to penicillin, novobiocin, amphicillin, erythromycin and oxacillin, and doxycycline and kanamycin, respectively. Methicilline-resistant S. aureus was found in roller of B farm and in hydroponic solution of D farm.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.2
• /
• pp.111-122
• /
• 1997

Provenance type and paleoclimate of the Jinju and Iljig formation were studied on the basis of compositions of sandstones from the western Euiseong area in the northern part of Kyong-sang basin. The average compositions of quartz, feldspar and lithic grain(Q:F:L) from the sandstones are 53:40:7 and 50:46:4 for Jinju and Iljig formations, respectively. The values fall into the arkosic arenite field. Petrographic detrital modes of the sandstones mainly suggest transitional continental block for the tectonic setting of the provenance. All sandstones from the Jinju and IIjig formations show chemical compositions close to average values of arkose(Pettijohn, 1975). $Na_2O$ contents is relatively high. $Fe_2O_3$(total iron) and MgO contents decrease with increasing $SiO_2$ contents since the framework grains of arkoses supposed to be derived from granitic rocks are poor in ferromagnesian minerals. The detrital framework grains still possess climatic signs even though the grains were more or less altered during deep burial. Bivariant plot of Suttner and Dutta(1986) suggests semi-arid to semi-humid paleoclimate during the deposition of the Jinju and Iljig sandstones.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.9-21
• /
• 2014

We examined high-resolution seismic data, side scan sonar data, surface sediments, and vibrocore samples from a sand ridge off the western part of Dukjuk-Do in Gyeonggi Bay, with the aim of interpretation of seismic stratigraphy and sedimentary environment. Based on the seismic data, the deposited sands are divided into three sedimentary units. 14C age data indicate that the top sequence (sequence I) formed at 5000-6000 yr BP, when a transgression resulted in strong shifting tides. Analyses of the vibrocore samples indicate that sequence II is a paleo-mudflat layer of intertidal sediments dominated by mud. Sequence III consists of terrestrial sediments that are presumed to have been deposited at the end of the Pleistocene, unconformably overlying the acoustic bedrock and Mesozoic granite. The side scan sonar data indicate that sand waves were formed on the seabed on top of the sand ridge. Generally, this is the direction of $N20^{\circ}E$, which coincides with the direction of tidal flow. Sand ripples occur away from the top of the sand ridge and are distributed homogeneously across a sandy slope. Vibrocore analyses indicate that the surface sediments and core sediments (samples VC-1, -2, and -3) are homogeneous, without any internal structures, and are characterized by a mixture of medium and fine sand (1-$2{\phi}$), respectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.11a
• /
• pp.139-139
• /
• 2000

종이는 제조 후 시간의 경과에 따라 노화가 야기되기 시작하며 이에 수반되는 현상으로서 종이의 기계적 강도 손실 및 종이의 색 변화를 들 수 있다. 종이의 노화 현상은 주로 빛, 열, 대기 오염물질, 미생물, 곤충 및 화학약품 등의 외부 인자들에 의해 종이 내에서의 가수 분해 또는 산화작용을 발생시키며 이는 종이의 폭넓은 이용올 제한하는 중요한 원인이 되고 있다. 종이의 노화기작은 주로 산 가수분해 및 산화작용 그리고 가교결합 둥으로 해석되고 있다. 이는 종이의 주 구성요소인 셀룰로오스의 수산기가 반웅하여 카르보닐기를 형성하면 서 저분자화 되거나 산소에 의해 산화되면서 저분자화 되어 종이의 강도적 손실이 일어난다 고 보고되고 있으며 종이의 황색화(Yellowing) 현상은 주원인이 종이에 잔존하고 있는 리그 년이 빛과 열에 의해 반응하여 산화됨으로써 야기된다고 설명되고 있다. 즉, 열이나 자외선 및 가시광션의 조사로 인한 셀룰로오스 및 기타 종이 구성물의 산화에 의해 종이가 퇴색되 거나 강도가 저하되는 현상이 일어나게 된다. 특히 이러한 노화 거동은 상온의 경우에서는 펄프와 종이의 황색화가 천천히 일어나지만 옹도가 점차 올라갈수록 그 속도는 빨라진다. 종이가 노화되면서 일어나는 산화반용은 주로 대기 중의 산소와 접촉하기 쉬운 표변에서부 터 발생하기 쉽다. 열처리를 통해 표면에서의 산화 작용은 촉진되고 종이의 구성원소의 결 합에 화학적 변화가 야기된다. 이를 분석하기 위해서 모든 원소가 독특한 결합에너지를 가 지고 있다는 것에 착안 시료 표면에 특정 x-선 및 전자빔을 입사하여 방출하는 광전자의 에너지를 측정함으로써 시료 표면의 조성 및 화학적인 결합상태를 알 수 있는 ESCA ( (Electron Spectroscopy for Chemical Analysis)를 이용하였다 .. ESCA는 주로 표면 원소의 규 명 및 정량분석과 화학결합 상태의 정성, 정량 분석, 깊이에 따른 원소의 농도 분포 분석, 고분자화합물의 특성 조사, 표면 원소의 화학결합에 따른 전자상태 연구 둥에 활용되 고 있 다. 즉, 종이가 노화되면서 원소들 사이에 변화되는 결합을 이러한 에너지 분석에 의해 원소 정성분석 또는 정량분석을 하고자 하였으며, 이를 분석하여 열처리 시 종이 표면에서 일어 나는 변화를 구명하고자 하였다. 이에 따라 본 연구에서는 종이의 노화를 가속화시키는 빛, 대기오염물질, 및 기타 다른 인 자들은 배제하고 열 만을 가해 노화의 진행속도를 높인 후, 노화 진행 시 종이 표변에 일어 나는 산화작용 및 가수분해를 표면 분석 장치인 ESCA를 이용하여 종이의 주 구성원소인 탄소와 산소가 열처리 시 변하는 에너지를 측정하였다. 또한 카르복실기 정량과 종이의 pH 측정 및 X -ray Diffractometer를 이용하여 결정화도를 측정하였다. 본 연구의 결과, 시간의 경과에 따라서 탄소의 결합에너지는 분포가 C-H에서 COO-, 또는 C=O로 달라짐으로써 종 이가 산화되고 있다는 것을 알 수 있었다. 또한 이 결합에너지 분포의 변화가 펄프의 종류 에 따라서 다르게 이동함으로써 제조된 시트의 표면 산화반응이 서로 다르게 일어나고 있음 을 알 수 있었으며, 이는 사용한 펄프의 화학 조성분의 차이에 기인한 것이라 사료된다.

• Journal of Food Hygiene and Safety
• /
• v.16 no.4
• /
• pp.274-279
• /
• 2001

Generally, non-aflatoxigenic fungi, such as Aspergillus oryzae, and Aspergillus are main microflora in Korean traditional fermented foods including Meju and soybean paste, but sometimes, Aspergillus flavus and Aspergillus parasiticus can be contaminated and accumulated aflatoxins during fermentation and storage. So the screening of aflatoxigenic strains in fermented traditional food is very important to improve the sanitary quality of those foods. In this work, we screened aflatoxin producing fungi from commercial Meju and soybean paste in Western Gyeongnam by immunoassay. Samples were randomly purchased from market of the commercial Meju(10 EA) and soybean paste(20 EA) in nine areas of Western Gyeongnam. Of the samples collected,24 strains and 22 strains of Aspergillus sp. were isolated from Meju and soybean paste, respectively. The isolated strains were cultured on SLS media at $25^{\circ}C$ for 15 days. The cultured broth were extracted with ethyl acetate and were analysed to determine aflatoxin B$_1$(AFB$_1$) by direct competitive ELISA(DC-ELISA). Six strains(25%) isolated from Meju, and 2 strains(9%) isolated from saybean paste, were confined as aflatoxin producing strains. The average range of aflatoxin productivity of isolates from Meju was 54.6 $\pm$ 38.7 ng/ml and that from soybean paste was 11.1 $\pm$ 8.6 ng/ml, respectively. Among them, isolated strain No. M-5-4 produced a high level of AFBl and showed 98.26 ng/ml of AFB$_1$. Every isolates were also re-confined their AFB$_1$productivity by thin layer chromatography(TLC). The TLC results also showed same trend as DC-ELISA results. As the above results, the screening of hazard mycotoxigenic fungi from traditional fermented foods should be necessary for the safety and the application of HACCP system in the food manufactory in Korea.

• Economic and Environmental Geology
• /
• v.35 no.6
• /
• pp.491-508
• /
• 2002

While about 80% of Jeju soils are classified as Andisols, the soils derived from volcanic ash in Dangsanbong are not Andisols. There is a significant difference of precipitation in localities of Jeju island. The study area is characterized by the lowest amount of annual rainfall in Jeju Island, and by the layered silicates as dominant solid phase in clay fraction. The purpose of this study was to characterize the mineralogy of the non-Andie soils in detail, especially hydroxy-interlayered silicates. Two major soil horizons are recognized in the soil profile developed in the Dangsanbong area, which can be designated as A and C. The soil pH($H_{2}0$), ranges from 6.6 to 7.3 increasing with depth, is higher than that of typical Andisols(pH<6.0). While the pH(NaF), ranges from 9.49 to 9.81, indicates that significant amount of amorphous phases might be present as exchanging complexes. It is estimated to about 1.542.88 wt% by using chemical selective dissolution. The organic content of surface horizon is about 2 wt%. This soil are composed of quartz, feldspar and olivine as major constituents with minor of silicate clays. Quartz is frequently observed in A and distinctly decreases in its amount with depth, while olivine is dominant phase in C and rarely observed in A. In the <0.2$\mu\textrm{m}$ size fraction, smectite and kaolinite/smectite interstratification are dominant with minor of illite. The amounts of smectite decrease with depth, while the amounts of kaolinite/smecite interstratification increase with depth, which indicates the trend of mineral transformation with increasing the degree of weathering. The proportion of kaolinite in kaolinite/smectite interstratification is about 85%, and is not changed significantly through the profile. In the 2-0.2$\mu\textrm{m}$size fraction, vermiculite, smectite, illite and kaolinite are major components with minor of chlorite. Most of chlorite are interstratified with smectite. Chlorite which is not interstratified with smectite occurs only in surface horizon. The proportion of the chlorite in the chlorite/smectite interstratification is 59-70(%) and increases with depth. Hydroxy-interlayered vermiculite(HIV) with hydroxy-Fe/AI in their interlayers occurs in both A and C horizon. The amounts of hydroxy-Fe/AI decrease with depth. Hydroxy-interlayered smectite(HIS) of which interlayers might be composed of hydroxy-Mg/Al occurs only in C horizon. As the results of mineralogical investigation for the soil profile in the study area, clay minerals might be changed and evolved through the following weathering sequences: 1) Smectite Kaolinite, HIS, Vermiculite, 2) Vermiculite HIV Chlorite.

• Journal of The Geomorphological Association of Korea
• /
• v.20 no.4
• /
• pp.51-70
• /
• 2013

The characteristics of deposits formed by the Daejon-cheon and Soobuk-cheon, dissecting the mountains such as Byungpung Mt. and Samin Mt. in western part of Damyang county, Jeonmam province. Results from field survey and bore hole logging by KIGAM are used in interpreting depositional environment, in this study. By the result of deposits near of the channels Daejon-cheon and Soobuk-cheon, and main channel of Youngsan River, the depth of sediment layers in this area is 4~7m, far thinner than formerly estimated. Weathered material of local rocks forms the base of the sedimentary layers. It can be assumed that the location channel of the Youngsan river has been stable ever since the start of the sedimentary events. Sediment particles of tributaries are angular than those of Youngsan River. Particles are larger and sorting is poor. It is interpreted as mount flash flood deposits. Main sources of sediments at the valley bottom or deposition dominated area are the terrace deposits or slope deposits over the gentle foot-slope or front of surrounding mountains. Some particles show polygonal cracking on the surface originated from the strong chemical weathering, while most of these has high angularity. It means various geomorphic processes operate to produce and transport the particles in this area.Isolated hills within the sedimentary plains are made with weathered materials of local bedrock. In the case of foot-slope of the hills, thin sedimentary layers are found. So it can be concluded that surface features of deposition zone of the Daejon-cheon and Soobuk-cheon is formed by the filling of lower part of the valley and its feature partly controlled by the relief of the weathering front.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.608-616
• /
• 2015

In this study, we have estimated the storm surge heights using numerical modeling on coastal area, and then evaluated the vulnerability index by applying the vulnerability assessment techniques. Surge modelling for 27 typhoons affected from 2000 to 2014 were simulated by applying the ADCIRC model. The results of validation and verification was in significant agreement as compared with observations for the top 6 ranking typhoons affected. As results, the storm surge heights in Jinhae Bay, Sacheon Bay, Gwangyang Bay, Cheonsu Bay and Gyeonggi Bay were higher than other inner coastal areas, then storm surge vulnerability assessment was performed using a standardization, normalization and gradation of storm surge heights. According to results of storm surge vulnerability assessment, index of Jinhae Bay, Sacheon Bay, Gwangyang Bay etc. are estimated to be vulnerable(4~5) because of the characteristics of storm surge such as inner bay are vulnerable compared with exposed to the open sea areas. However, index in the inner bay of western Jeonnam are not vulnerable(1~3) relatively. It may not appear the typhoons affected significantly for the past 15 years. So, the long-term vulnerability assessment with the sensitivity of geomorphology are necessary to reduce the uncertainty.

• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.321-328
• /
• 2003

The epithermal gold and base metal deposit of the Tanggeung district of West Java consists of four major veins(Celak, Cigodobras, Cilangkap and Pasirbedil) with NS to N10$^{\circ}$∼20$^{\circ}$E and N75$^{\circ}$W strikes. The veins occur within fractures cutting the crystal and lithic tuff of Jampang Formation(Oligo-Miocene) in and around the Mt. Subang of the western Java, Indonesia. The ore mineralization is characterized by the occurrence of pyrite, sphalerite, galena, chalcopyrite, and small amounts of bornite and Fe-oxides. Hydrothermal alteration, associated with the mineralization, was dominantly silicified and enveloped by the phyllitic(sericitic), argillic and propylitic alteration containing the disseminated pyrite. Gangue minerals consist of interstratified smectite-illite, chlorite, sericite, and minor kaolinite. The presence of vapor-rich fluid inclusions in quartz veins suggests that boiling occurred locally throughout ore deposition. Fluid inclusion studies suggest that the ore fluid evolved from initial high temperatures(〓34$0^{\circ}C$) to later lower temperatures(〓19$0^{\circ}C$). Salinities range from 0.0 to 8.3 wt percent NaCl equiv. The relatively high increase in salinity(up to 8.3 wt percent NaCl equiv) might be explained by a local boiling and by a participation of magmatic fluids, supported by the sulfur isotope results. Evidence of fluid boiling suggests that the pressure decreased from 200 bars to 120 bars. This corresponds to the depths of approximately 750 to 1,200 m in a hydrothermal system that changed from lithostatic to hydrostatic conditions. Using homogenization temperatures and paragenetic constraints, the calculated $\delta$$^{34}$ S values of $H_2S$ in ore fluid are -0.2 to 1.8 permil close to the 0 permil isotopic value of magmatic sulfur.

• Korean Journal of Environmental Biology
• /
• v.39 no.1
• /
• pp.46-54
• /
• 2021

The seasonal and vertical biomass of marine forest seaweeds were examined to select a suitable species at 12 sites of the South Sea in Korea between 2018 and 2019. The Habitat Suitability Index (HSI) was also calculated in terms of biomass for six species (three kelp and three Sargassum species). A total of 16 marine forest-forming species including four kelp and 12 Sargassum species were observed at the 12 sites. The average annual seaweed biomass by season and depth ranged from 843.73-2,925.85 g wet wt. m^-2 at the eastern South Sea and from 343.87-4,580.10 g wet wt. m^-2 at the western South Sea. In the kelp species, the Ecklonia cava biomass was predominant, followed by E. stolonifera. The macroalgal species with the greatest biomass was Sargassum macrocarpum, followed by S. horneri. The HSI values of E. stolonifera were between 0.76-1.0 at eight sites and those of E. cava were 0.58-0.92 at four sites, indicating that E. stolonifera was more suitable than E. cava. In the HSI values of the Sargassum species, S. horneri ranged between 0.84-1.0 at all 12 sites and the S. macrocarpum values were between 0.68-0.99. The results indicate that E. cava and S. macrocarpum were the most suitable for the marine forest construction in terms of the seaweed biomass, and E. stolonifera and S. horneri in terms of the HSI values. Thus, we suggest that seaweed biomass and HSI values should be considered when choosing suitable forest-forming species.