• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.94-99
• /
• 2000

In this study applied the general controller into th 16bit ordinary controller and recommand the simulator features the real system's propeties without DSP(Digital Signal Processing)-card. This simulator is designed to be synchronized in real time using A/D(Analog-Digital) convert and D/A(Digital-Analong) convert. In this study DSP card which is usually used for complex calculation is replaced with personal computer and designed to control, control-force using with the 16-bit micro processor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.940-948
• /
• 2007

The Advanced Spent Fuel Conditioning Process(ACP), which is the process of the reduction of uranium oxide by lithium metal in a high temperature molten salt bath for spent fuel, was developed at Korea Atomic Energy Research Institute (KAERI). Since the ACP equipment is located in an intense radiation field (hot cell) as well as in a high temperature, it must be remotely operated and maintained. The ACP hot cell is very narrow so the workspace of the wall-mounted mechanical Master-Slave Manipulators(MSMs) is restricted. A Bridge Transported Servo Manipulator(BTSM) system has been developed to overcome the limitation of an access that is a drawback of the mechanical MSMs. The BTSM system consists ot a bridge crane with telescoping tubeset, a slave manipulator, a master manipulator, and a control system. We applied a bilateral position-position control scheme with friction compensation as force-reflecting controller. In this paper, the transmission characteristics on the tendon-and-pulley train is numerically formulated and analyzed. Also, we evaluate the performance of the force-reflecting servo manipulator.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.9
• /
• pp.157-165
• /
• 2002

The design of hydraulic & control system has been developed for the disc spinning machine. The hydraulic system has been designed in the overall system including the vertical & horizontal slide fur spinning works which are controlled by hydraulic servo valves in right & left side, and the clamping slide for holding & pressing blank material in center during spinning process. Based on the design concept of this hydraulic system, model test experiments for hydraulic servo control system is tested to conform confidence and applying possibility. The control system is introduced with the fuzzy-sliding mode controller for the hydraulic force control reacting force as a disturbance, because a fuzzy controller does not require an accurate mathematical model for the generation of nonlinear factors in the actual nonlinear plant with unknown disturbances and a sliding controller has the robustness & stability in mathematical control algorithm. We conform that the fuzzy-sliding mode controller has a good performance in force control for the plant with a strong disturbance. Also, we observe that a steady state error of the fuzzy-sliding mode controller can be reduced better than those of an another controllers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.10
• /
• pp.989-994
• /
• 2011

This study aims to demonstrate the feasibility of a visual servoing-based paired structured light (SL) robot for estimating structural displacement under various external loads. The former paired SL robot, which was proposed in the previous study, was composed of two screens facing with each other, each with one or two lasers and a camera. It was found that the paired SL robot could estimate the translational and rotational displacement each in 3-DOF with high accuracy and low cost. However, the measurable range is fairly limited due to the limited screen size. In this paper, therefore, a visual servoing-based 2-DOF manipulator which controls the pose of lasers is introduced. By controlling the positions of the projected laser points to be on the screen, the proposed robot can estimate the displacement regardless of the screen size. We performed various simulations and experimental tests to verify the performance of the newly proposed robot. The results show that the proposed system overcomes the range limitation of the former system and it can be utilized to accurately estimate the structural displacement.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.1
• /
• pp.10-18
• /
• 2000

This paper proposes a fuzzy logic cross-coupled controller using a new contouring modeling for a two-axis servo system. The general decoupled control approach may result in degraded contouring performance due to such factors as mismatch of axial dynamics and axial loop gains. In practice, such systems contain many uncertainties. The cross-coupled controller utilizes all axis position error information simultaneously to produce accurate contours. However, the conventional cross-coupled controllers cannot overcome friction, backlash, and parameter variations. Also since, it is difficult to obtain an accurate mathematical model of multi-axis system, here we investigate a fuzzy logic cross-coupled controller of servo system. In addition, new contouring error vector computation method is presented. The experimental results are presented to illustrate the performance of the proposed algorithm.

• Journal of Drive and Control
• /
• v.15 no.1
• /
• pp.16-27
• /
• 2018

Hydraulic torque load simulator is essential to test and qualify the performance of various angle control systems. Typically a flapper-type second stage servovalve is applied to the load simulator, but here the direct drive servovalve, which is a kind of one-stage valve and affected by the large flow force, is applied. Since the torque load is applied not to the stationary shaft but to the rotating shaft of the angle control system, the controlled torque of load simulator is not accurate due to the rotating speed of the angle control system. A feedforward compensator is designed and applied to minimize the disturbance-like effect. A mathematical model is derived and linearized to analyze the stability, accuracy and responsiveness of the torque load simulator. The parameter effects of a controller, servovalve, hydraulic motor, rotating spring shaft are analyzed and summarized. The goodness of the linear analysis is verified by the digital computer simulations using both the linear and nonlinear mathematical models.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.141-144
• /
• 2001

In this paper, we proposed a neural network controller with a fuzzy compensator which compensate a output of neural network controller. Even if learn by neural network controller, it can occur a bad results from disturbance or load variations. So in order to adjust above case. we used the fuzzy compensator to get an expected results. And the weight of main neural network can be changed with the result of learning an inverse model neural network of plant, so a expected dynamic characteristics of plant can be got. In order to confirm a performance of the proposed controller, we implemented the controller using the DSP processor and applied in a hydraulic servo system. And then we observed an experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.214-221
• /
• 1998

A new control approach using neural network for the robust position control of a BRUSHLESS direct drive(BLDD) motor is presented. The linear quadratic controller plus feedforward neural network is employed to obtain the robust BLDD motor system approximately linearized using field-orientation method for an AC servo. The neural network is trained in on-line phases and this neural network is composed by a feedforward recall and error back-propagation training. Since the total number of nodes are only eight, this system will be easily realized by the general microprocessor. During the normal operation, the input-output response is sampled and the weighting value is trained by error back-propagation at each sample period to accommodate the possible variations in the parameters or load torque. And the state space analysis is performed to obtain the state feedback gains systematically. In addition, the robustness is also obtained without affecting overall system response.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1249-1255
• /
• 2010

An ultra high- pressure system generally consists of a hydraulic power unit, an oil supply unit, an electrical power supply device, and an electrical control device. The hydraulic power unit supplies the hydraulic power to the intensifier to create generate ultra high pressure. The intensifier amplifies increases the pressure using the oil supplied from by the hydraulic power unit. The electrical supply devices and control devices maintain are provided for the electric motors, valves, and sensors. In this study, instead of a flow-control device, a pressure-control type device was mounted on a manifold block in the hydraulic power unit instead of the flow-control type. A servo valve was fitted in the intensifier, and the performance characteristics of the intensifier varied according to the variations of in the pressure cycle and with the temperature of the operating oil in the hydraulic power unit.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.205-208
• /
• 1998

영구자석형 하이브리드 스텝모터는 저가이며 개루프 제어 장치와 더불어 기계적인 제어시스템분야에서 광범위하게 이용되어 왔다. 서보모터 기술의 발달에 따라 영구자석형 스템모터는 고토크, 정밀제어의 응용분야에 있어 중요한 위치를 계속 점유하고 있다. 스텝모터는 외란으로서 작용하는 부하의 영향에 대해 안정한 견고성을 가지며, 적당한 속도와 양호한 분해능의 조합으로 신뢰도가 높고, 구조상 단순한 특징을 갖고 있다. 최근 저가의 개루프 위치제어 장치에 2상 스텝모터와 5상 스텝모터 중에서 어느 것이 더 적합한가에 대한 기술적인 주제가 주목할 어느 것이 더 적합한가에 대한 기술적인 주제가 주목할 만한 문제로 대두되고 있다. 이 두 기기의 구조는 거의 유사하며 같은 원리로 동작한다. 본 논문에서는 이 두 기기의 동작이 명백히 비교될 수 있는 기본적인 수준으로 돌아가서 두 모델을 고찰했다.