• Title/Summary/Keyword: 생체적합형

Search Result 104, Processing Time 0.023 seconds

Effects of Shading on the Growth of Hedera rhombea Bean and Pachysandra terminalis Sieb. et Zucc. (차광수준이 송악과 수호초의 생육에 미치는 효과)

  • Jeong, Hyun Hwan;Kim, Ki Sun
    • Horticultural Science & Technology
    • /
    • v.17 no.1
    • /
    • pp.29-32
    • /
    • 1999
  • This experiment was conducted to investigate the effect of different levels of shading (0, 35, 55, 75, 95% to incident sunlight) on the growth of Hedera rhombea Bean and Pachysandra terminalis Sieb. et Zucc. in order to determine optimum light intensity for ground cover plants. H. rhombea showed a upright growth type under 95% shading and P. terminalis was highest under 35% shading. Number of branches was not significantly affected by shading levels. Stem diameter and length were reduced under shading from 35% to 95%. Leaf growth was vigorous under 35% and 55% shade condition. Leaves became longer with decreasing light intensity, but shorter in 95% shading than control. There was a slight trend that total chlorophyll and chlorophyll a, b contents increased with decreasing light intensity, and so did chlorophyll a/b ratio. Fresh and dry weight of both plants were higher under 35, 55, and 75% shading than control and 95% shading. Specific leaf weight tended to decrease with reduction of light intensity. Thus, optimum light intensity for growth of them may be 35 and 55% shading of incident sunlight. In addition, it is possible to grow them under even 75% shading of incident sunlight.

  • PDF

Membrane Application of Poly(lactic acid) (Poly(lactic acid)의 분리막에의 응용)

  • Nam Sang-Yong;Park Ji-Soon;Rhim Ji-Won;Dorgan J.R.
    • Membrane Journal
    • /
    • v.16 no.2
    • /
    • pp.85-105
    • /
    • 2006
  • Poly(lactic acid) is a linear aliphatic thermoplastic polyester, produced by the ring-opening polymerization of lactides and the lactic acid monomers, which are obtained from the fermentation of sugar feed stocks, corn, etc. PLA has high mechanical, thermal plasticity, fabric-ability, and biocompatibility, So PLA is a promising polymer far various end-use applications. In recent time, the intercalation of polymers from either solution or the melt in the silicate galleries of clay is the best technique to prepare nanocompoiste material which often exhibit remarkable improvement of mechanical, thermal, optical and physicochemical properties when compared with the pure polymer or conventional composites. Layered silicate is naturally abundant, economic, and more importantly benign to the environment.

Maxillary cement retained implant supported fixed prosthesis using the millingable Pd-Ag alloy generated by CAD/CAM system: clinical report after two years in service (상악 전부 무치악 환자에서 CAD/CAM 시스템으로 제작되는 Pd-Ag 합금을 이용한 고정성 임플란트 전악 수복 증례)

  • Lee, Jun-Sik;Han, Se-Jin;Choi, Yu-Sung
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.30 no.1
    • /
    • pp.71-80
    • /
    • 2014
  • Full-mouth reconstruction of a patient using dental implants is a challenge if there is vertical and horizontal bone resorption. Therefore, it is should be cautious in making the fixed prostheses that restore the function and the esthetics of the gingiva and teeth. In full mouth rehabilitation, CAD/CAM system makes it possible to fabricate restorations with high precision, regardless of span of the restoration. Recently, Palladium-silver (Pd-Ag) alloy which is highly biocompatible and millingable has been developed to compensate for the shortcomings of the titanium or zirconia. This clinical report presents the reconstruction of a maxillary arch with a cement retained implant supported fixed prosthesis using a Pd-Ag alloy generated by CAD/CAM system on eleven osseointegrated implants. The occluding surfaces were made of Pd-Ag alloy, to decrease the risk of chipping or fracture. The prostheses were esthetically pleasing, and no clinical complications have been reported after two years.

Good to Great Microarray Research

  • Kim Seong-Han
    • Proceedings of the Korean Society for Bioinformatics Conference
    • /
    • 2006.02a
    • /
    • pp.57-61
    • /
    • 2006
  • Microarray란 유리, 실리콘, 플라스틱 등의 매체위에 생체분자를 집적하여 만든 플랫폼을 의미한다. 현재 이러한 플랫폼에 DNA, 화학물질, 유기물질 등 바이오소재를 집적하여 다양한 연구용 제품들이 출시되어 있으며, 수년간 Microarray를 이용한 연구가 진행되어 최근에는 질병진단/예후예측 등의 포괄적인 정보를 포함하는 임상용 microarray제품도 등장하고 있다. 디지탈지노믹스(주)는 2000년 이후로 6년의 기간동안 연구자에게 다양한 종류의microarray를 공급하여 왔으며, 현재 국내에서 가장 많은 종류의 microanay 분석 시스템을 확보하고 있다. 따라서 다양한 연구자들에게 가장 적합한 microarray를 소개할 수 있음은 물론, 그 결과분석 데이터를 제공함으로써 양질의 데이터와 서비스를 제공하고 있다. 특히 디지탈지노믹스(주)에서는 최근에 Combimatrix사의 microarray 시스템을 도입하여, 연구자가 원하는 맞춤형 microarray를 제작할 수 있는 새로운 형태의 차세대 플랫폼을 제공할 수 있게 되었다. 이 기술은 연구자의 목적에 맞게 microarray 제작이 가능하도록 가변적인 특성을 가지고 있으며 높은 민감도 및 재현성을 보여주는 우수한 기술력을 보여준다. Microarray 분야는 그 플랫폼과 분석기술이 나날이 발전하고 있으며, 그 응용범위도 날로 넓어 지고 있다. 그 활용범위의 예를 보면, 1) 유전체 수준에서 발현양상 분석, 2) 약물에 대한 반응성 분석, 3) 질환에 대한 원인 유전자 규명 및 진단제 개발, 4) 독성유전체에서의 약효 및 유효성 분석, 5) 대량의 SNP 분석, 6) 대량의 단백질 수준에서의 발현분석 등이 있으며, 일일이 다 언급하기 힘들 정도로 그 응용범위가 넓어지고 있다. 이러한 microarray기술은 관심 있는 대상에 대한 검색(screening)의 기능과 더불어 분석된 데이터를 기초로 제품화 플랫폼으로써 다시 활용될 수 있는 장점을 가지고 있다. 디지탈지노믹스(주)에서는 구축되어 있는 microarray 분석 시스템을 이용하여 질병 진단, 약물반응성 진단 및 플랫폼 개발에 대한 내부연구도 심도 있게 수행하고 있으며, microarray 기술을 응용하여 산업화, 제품화 할 수 있는 구체적인 사례와 모범답안을 만들기 위해 노력하고 있다.

  • PDF

Thermosensitive Sol-gel Phase Transition Behavior of Methoxy poly(ethylene glycol)-b-poly($\varepsilon$-caprolactone) Diblock Copolymers (메톡시 폴리(에틸렌 글리콜)-폴리($\varepsilon$-카프로락톤) 공중합체의 온도감응성 솔-젤 전이 거동)

  • 서광수;박종수;김문석;조선행;이해방;강길선
    • Polymer(Korea)
    • /
    • v.28 no.4
    • /
    • pp.344-351
    • /
    • 2004
  • Poly(ethylene glycol)-based diblock and triblock polyester copolymers stimulating to temperature were studied as injectable biomaterials in drug delivery system because of their nontoxicity, biocompatibility and biodegradability. We synthesized the diblock copolymers consisting of methoxy poly(ethylene glycol) (MPEG) (M$_{n}$=750 g/mole) and poly($\varepsilon$-caprolactone) (PCL) by ring opening polymerization of $\varepsilon$-CL with MPEG as an initiator in the presence of HCl . Et$_2$O. The aqueous solution of synthesized diblock copolymers represented sol phase at room temperature and a sol to gel phase transition as the temperature increased from room temperature to body temperature. To confirm the in vivo gel formation, we observed the formation of gel in the mice body after injection of 20 wt% aqueous solution of each block copolymer. After 2 months, we observed the maintenance of gel without dispersion in mice. In this study, we synthesized diblock copolymers exhibiting sol-gel phase transition and confirmed the feasibility as biomaterials of injectable implantation.n.

Fabrication of Graphene-modified Indium Tin Oxide Electrode Using Electrochemical Deposition Method and Its Application to Enzyme Electrode (전기화학 증착법을 이용한 그래핀 개질 Indium Tin Oxide 전극 제작 및 효소 전극에 응용)

  • Wang, Xue;Shi, Ke;Kim, Chang-Joon
    • Korean Chemical Engineering Research
    • /
    • v.60 no.1
    • /
    • pp.62-69
    • /
    • 2022
  • Graphene has a large surface area to volume ratio and good mechanical and electrical property and biocompatibility. This study described the electrochemical deposition and reduction of graphene oxide on the surface of indium tin oxide (ITO) glass slide and electrochemical characterization of graphen-modified ITO. Cyclic voltammetry was used for the deposition and reduction of graphene oxide. The surface of graphen-coated ITO was characterized using scanning electron microscopy and energy dispesive X-ray spectroscopy. The electrodes were evaluated by performing cyclic voltammetry and electrochemical impedance spectroscopy. The number of cycles and scan rate greatly influenced on the coverage and the degree of reduction of graphene oxide, thus affecting the electrochemical properties of electrodes. Modification of ITO with graphene generated higher current with lower charge transfer resistance at the electrode-electrolyte interface. Glucose oxidase was immobilized on the graphene-modified ITO and has been found to successfully generate electrons by oxidizing glucose.

Recent Trends in Low-Temperature Solution-Based Flexible Organic Synaptic Transistors Fabrication Processing (저온 용액 기반 유연 유기 시냅스 트랜지스터 제작 공정의 최근 연구 동향)

  • Kwanghoon Kim;Eunho Lee;Daesuk Bang
    • Journal of Adhesion and Interface
    • /
    • v.25 no.2
    • /
    • pp.43-49
    • /
    • 2024
  • In recent years, the flexible organic synaptic transistor (FOST) has garnered attention for its flexibility, biocompatibility, ease of processability, and reduced complexity, which arise from using organic semiconductors as channel layers. These transistors can emulate the plasticity of the human brain with a simpler structure and lower fabrication costs compared to conventional inorganic synaptic devices. This makes them suitable for applications in next-generation wearable devices and soft robotics technologies. In FOST, the organic substrate is sensitive to the device preparation temperature; high-temperature treatment processes can cause thermal deformation of the organic substrate. Therefore, low-temperature solution-based processing techniques are essential for fabricating high-performance devices. This review summarizes the current research status of low-temperature solution-based FOST devices and presents the problems and challenges that need to be addressed.

Growth and Quality of Baby Leaf Vegetables Hydroponically Grown in Plant Factory as Affected by Composition of Nutrient Solution (양액 조성이 식물공장 재배 어린잎채소의 생육 및 품질에 미치는 영향)

  • Kwack, Yurina;Kim, Dong Sub;Chun, Changhoo
    • Journal of Bio-Environment Control
    • /
    • v.24 no.4
    • /
    • pp.271-274
    • /
    • 2015
  • The objective of this study was to investigate the effects of composition of nutrient solution on the growth and quality of baby leaf vegetables (tat soi, romaine lettuce, beet, and red radish) hydroponically cultivated in plant factory. The seeds of four vegetable crops were sown in urethane sponges and cultivated for 14 days in a plant factory. Light intensity and photoperiod were $110{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and 16 h, respectively; and air temperature in photo/darkperiod was maintained at $25/20^{\circ}C$. Tap water was used for irrigation for 7 days after sowing, and then plants were irrigated for 7 days using tap water and the nutrient solutions of Korea Wonshi, Japan Enshi, and Yamazaki for lettuce. At 14 days after sowing, the fresh weight of tah soi was highest in the nutrient solution of Yamazaki for lettuce, and there were no significant differences among nutrient solutions in beet and red radish. When we compared leaf color using Hunter's a value, the nutrient solution of Korea Wonshi and Japan Enshi increased green color in baby leaf vegetables, while the nutrient solution of Yamazaki for lettuce increased red color. Total phenolic content of romaine lettuce was highest in the nutrient solution of Korea Wonshi, but tat soi, beet, and red radish showed no significant differences among nutrient solutions in total phenolic contents. From these results, we suggest that using the nutrient solution of Korea Wonshi can enhance the growth and quality of romaine lettuce and the nutrient solution of Yamazaki for lettuce is appropriate for enhancing the growth and red color of beet and red radish in plant factory.

군집분석을 이용한 새로운 IS 실무자 분류 체계에 관한 연구

  • Gyeong, Won-Hyeon;Go, Seok-Ha
    • Proceedings of the Korea Society of Information Technology Applications Conference
    • /
    • 2006.06a
    • /
    • pp.573-601
    • /
    • 2006
  • IS 실무자들은 과거처럼 단순한 시스템 분석이나 프로그래밍 기법만을 갖추는 것만으로는 조직이 원하는 정보기술을 효과적으로 운용하는 것이 어렵게 되고 있다. 예전과는 달리 최근의 기업에서는 통신 시스템을 포함하는 다양한 정보기술에 관련된 지식과 기술을 전문적으로 다룰 수 있는 전문가를 원하는 추세이다. 이러한 맥락에서 IS 실무자들이 자신의 업무를 성공적으로 수행하기 위해 필요한 전문 지식과 기술은 무엇인가라는 질문에 대한 대답을 알 수 있어야만 한다. 본 연구는 IS 실무자들이 그들이 직면하고 있는 ‘IS 지식과 기술의 빠른 변화’를 얼마만큼 인식하고 있으며, 그들이 필요로 하는 지식과 기술과 업무를 수행함에 있어 필수적인 지식과 기술을 얼마만 큼 보유하고 있는지를 조사하였다. 본 연구에서는 조사된 자료를 통하여, 기존의 국내외의 문화에서 밝혀진 인구 통계학적 분류기준 (예를 들자면, 경력 수준, 지역, 직종) 이외에 이들을 분류할 수 있는 기준에는 어떠한 것이 있는가에 대한 연구를 수행하였다. 분석을 위하여 실무자들이 현업에서 많은 시간과 노력을 들이고 있는 IS 활동영역에 대한 투자시간을 기준으로 실무자들을 분류하였다. 분석에서는 조사자의 군집분석과 다차원 분석을 통하여 분류된 실무자 그룹에 대한 여러 가지 기술적인 특성과, 인구 통계학적 특성을 파악하고, 그룹들에 대하여 새로운 분류에 적합한 표기를 제시하고자 하였다. 본 논문은 정보시스템 영역에서 수행된 IS 실무자들에 다양한 연구의 한 부분으로서, 기업 환경, 조직 환경, 나아가 실무자들의 직무환경의 개선에 필요한 지식과 기술을 제공할 것이다.아날로그 방식에서 IT 기반에 의한 디지털 환경으로 변화되고 있다. 또한 e러닝, T러닝, m러닝, u러닝 등의 용어가 생성되고 있다.키지에어컨에서 사용되고 있는 밀폐형 압축기에 대해서 그림 2에서 나타내고 있는 냉방능력 10tons(120,000Btu/h) 이하를 중심으로 상기의 최근 기술 동향을 간략하게 소개하고자 한다.질표준의 지표성분으로 간주되는 진세노사이드의 절대함량과 그 성분조성 차이에 따른 임상효과의 차별성이 있는지에 대한 검토와, 특히 최근 실험적으로 밝혀지고 있는 사포닌 성분의 장내 세균에 의한 생물전환체의 인체 실험을 통한 효과 검정이 필요하다. 나아가서는 적정 복용량의 설정과 이와 관련되는 생체내 동태 및 생체이용율(bioavilability)에 관한 정보가 거의 없으므로 이것도 금후 검토해야 할 과제로 사료된다. 인삼은 전통약물로서 오랜 역사성과 그동안의 연구결과에 의한 과학성을 가지고 있으므로 건강유지와 병의 예방 및 회복촉진을 위한 보조요법제 또는 기능성 식품으로써의 유용성이 있는 것으로 판단된다. 앞으로 인삼의 활용성 증대를 위해서는 보다 과학적인 임상평가에 의한 안전성 및 유효성 입증과 제품의 엄격한 품질관리의 필요성이 더욱 강조되어야 할 것이다.xyl radical 생성 억제 효과를 보여 주었다. 본 실험을 통하여 BHT 를 제외하고 전반적으로 세포 수준에서의 oxidative stress 에 대한 억제 효과를 확인해 볼 수 있었으며 특히 수용성 항산화제들에서 두드러진 효과를 보여 주었다. 제공하여 내수기반 확충에도 노력해야 할 것 이다.있었다., 인삼이 성장될 때 부분적인 영양상태의

  • PDF

Effect of Seminal Sections of Tuber and Staking Methods on Growth and Yield of Chinese Yam (Dioscorea batatas Decne) (종근부위(種根部位) 및 지주형(支柱形)이 마의 생육(生育)과 수량(收量)에 미치는 영향(影響))

  • Kang, Dong-Kyoon;Cho, Ji-Hyung;Kim, Sang-Kuk;Min, Gi-Gun;Chung, Sang-Hwan;Choi, Boo-Sull
    • Korean Journal of Medicinal Crop Science
    • /
    • v.6 no.3
    • /
    • pp.170-175
    • /
    • 1998
  • This study was conducted to determine the effect of seminal sections of tuber and staking methods on growth and yield of a chinese yam (Dioscorea batatas Decne). Tuber was divided into top head, head, median and tail which were used as seminal sections of tuber. The emergence of shoots was delayed in median and tail sections by 15 days as compared with top head and head sections. Sections from head and tail exhibited yield increase as high as 16 and 15%, respectively, compared to top head sections. Although flowering and bubil setting occurred almost at the same time in all staking methods, fresh weight of stem and leaves was higher in ${\wedge}-$, I-type stake supporting net than in the conventional stake. In the cultivar, 'Dan-ma', tuber yield didn't show a meaningful increase statistically by all staking methods. But ${\wedge}-$ and I-type stake supporting net increased the yield of the cultivar, 'Jang-ma', as high as 11 and 8%, respectively, compared to conventional stake. Also I-type stake was ideal supportor of net, considering the cost of management.

  • PDF