• KOMUNHWA
• /
• no.56
• /
• pp.59-91
• /
• 2000

The iron culture have been studied mainly about the initial aspect and the growth of polity grossly on the level of the south Korea or the Yeungnam province. But the iron culture is necessary to study by diachronic and regional approach about the artifact

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.579-584
• /
• 2001

This experiment was conducted to investigate the effect of soil moisture content on cut flower quality of Gypsophila paniculata L. 'Bristol Fairy' in spring and autumn cultivations. The soil moisture potential (SMP) set point for irrigation was either -3.2 or -10.0kPa in the vegetative growth stage, and -10.0, -31.6, or -79.4kPa after the budding stage. When soil moisture reached at each set SMP point, 10 mm water was drip-irrigated. Tendency of flowering was earlier as SMP set point was lower in both vegetative growth and after budding stages. No other flower characteristics were found among other treatments. In both spring and autumn cultivations, as SMP set point was lower, the low primary branch length and upper internode length were decreased, the stem firmness was increased, and curvature of cut flower stem was decreased. Especially, in autumn, the higher the SMP set point, the higher the low primary branch than the apex, thus the paniculate inflorescence was deeply destroyed. Yield in spring cultivation was not significantly different among treatments, while that in autumn cultivation increased as the lower the SMP value. It is thought that optimal imgation points during vegetative growth and after budding stages to produce high quality cut flowers are -10.0 and -79.4kPa, respectively.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.111-131
• /
• 2012

Mass Customization combines the advantages of mass production and customization. Mass customization has been praised as an innovative approach that would result in changes in business paradigm. However, there is no consensus on the concept of mass customization, but only a generally accepted framework exists to explain successful practices. Prior cases in mass customization are those of the small-medium sized or Internet-based companies. We in this paper explore the mass customization cases of market-leading manufacturers. Although those traditional organizations may be not for swift change, the cases of those companies are important because they target mass markets. Lampel and Mintzberg[35] proposed a continuum of strategies ranging from pure standardization to pure customization. This study investigates mass customization strategies of three companies. In this paper, the cases of cosmetics and sports shoe can be described as tailored customization, and the household appliances case can be classified as customized standardization. These three cases are compared with each other from the customers' decoupling point. Findings and implications of this research are discussed.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.200-210
• /
• 1994

In batch bioreactor fermentations for cyclosporin A (CyA) production, good potential for bioprocess improvement was demonstrated in the immobilized cell system, providing appreciably better utilization of the catalytic activity of the biomass than the freely suspended cells, especially during the exponential phase. When concentrated nutrient medium was added pulsely during the exponential phase of cell growth(at hour 139 of fermentation), reactivation and regermination in both immobilized and suspended cell cultures were observed to contribute to the longevity of CyA production, maintaining maximum CyA titre until 250 hours of fermentation. Contrarily, simple batch fermentations without any supplement of medium in both systems showed repid decrease in CyA concentrations during the late stationary phase. Notably, the CyA yield coefficient $(Y_p/x)$ for the immobilized cell system was maintained quite high even after the pulse addition of the concentrated full medium, reaching almost 80% of the level attained during the exponential phase. This is in sharp contrast when compared with the corresponding value of 58% in the case of parallel-suspended cells. This pattern of CyA production resulted in considerably enhanced CyA production in the immobilized cell system, reaching almost 2 time higher maximum CyA production in comparison with the free cell system.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.468-475
• /
• 2022

This study was conducted to find out the efficiency of heating initiative temperature and carbon dioxide fertilization in summer squash (Cucurbita moschata D.). The heating start temperature experiment was performed at 9℃, 12℃, and 15℃ using an electric heater and operated when the temperature was lower than the target temperature. The CO₂ fertilization concentration experiment was performed from 7 to 12 with the control, 500 µmol·mol^-1, and 800 µmol·mol^-1 using liquefied carbon dioxide. Investigation items were plant height, stem diameter, number of leaves, leaf area, fresh weight, dry weight, also economic analysis was conducted by surveying only fruits exceeding 100 g. Photosynthesis was measured for the upper leaf position to calculate the saturation point according to the control. The photo saturation point was 587 µmol·m^-2·s^-1, and the CO₂ saturation point was 702 µmol·mol^-1. A_max values by carbon dioxide were 13.4, 17.8, 17.2, 19.6, and 17.5 µmolCO₂·m^-2·s^-1 in the order of 9℃, 12℃, 15℃, 500 µmol·mol^-1, and 800 µmol·mol^-1. In the temperature experiment, 9℃ in growth did not grow normally and no fruiting was performed. 12℃ and 15℃ were higher than 9℃, but there was no significant difference in growth and production. The CO₂ fertilization experiment showed no significant difference between the treatment in growth, but the productivity of 800 µmol·mol^-1 was the best. Comprehensively, the heating initiative temperature of 15℃ was good for crop growth and production, but there is no significant difference from 12℃, so it is good to set the heating start temperature to 12℃ economically, and maintaining of 800 µmol·mol^-1 is effective in increasing production.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.497-506
• /
• 1998

The expression in Escherichia coli of a cloned insecticidal protein (ICP) gene from Bacillus thuringiensis var. kurstaki HD1 in pHLN1-80 (+) and pHLN2-80(-) plasmids was investigated through deletions in promoters, transcription start point, and termination region. Six recombinant plasmids were constructed in an attempt to analyze the overexpression of the ICP in relations to its gene structure. The amounts of ICP produced from the recombinants were measured by SDS-PAGE and confirmed by Western blot analysis. One clone was not overexpressed which having only -80 bp (contained BtI promoter) part of the ICP gene promoter (without Plac promoter), the right-oriented ICP gene and the termination region. Removal of 350 bp from upstream region of the Plac of the clone pHLN2-80 (-) resulted in overexpression of the ICP. One clone was not overexpressed in which the clone consisted of -72 bp part of the ICP promoter without the transcription start point and the transcriptional termination region, and having the right-oriented ICP gene sequence. One clone consisting of the inverted ICP gene sequence, the -72 bp ICP gene promoter, and without the termination region caused overexpression. One clone which consisted of the inverted ICP gene, the -72 bp ICP gene promoter and the termination sequence was overexpressed. These results indicated that the Plac promoter, transcription termination region, the inverted ICP gene insertion, and the -80 bp or -72 bp part of the ICP gene promoters were concerned in the overexpression of the ICP gene in the recombinant plasmid, and also the overexpression mechanism might result from the disruption of the transcription-suppressing regions in the promoter regions.

• 전기의세계
• /
• v.13 no.2
• /
• pp.20-22
• /
• 1964

일찌기 1930년대에 미국에서 냉간압정법에 의한 방향성규소강대의 제조에 성공한 이래 이의 자기적특성에도 비약적인 향상을 가져와 미국에서 이미 이를 사용한 권철심형변압기가 실용화되고 있는지 오래거니와, 가까운 일본만 하여도 1958년에 권철심형주상변압기가 제조 완성되었으며, 현재는 주상변압기의 대부분이 종래의 적철심형변압기와 교체되고 있는 실정이다. 더우기 최근에는 소형의 주상변압기 뿐만아니라 중형의 권철심형 배전용변압기 제작도 가능하게 되어 그야말로 배전용 변압기분야엔 권철심형변압기 전성시대가 온것이다. 이처럼 권철심형변압기가 크게 환영받는 이유는 방향성 규소강대의 우수한 자기적인 특성을 이용하여 고성능인 동시에 소형, 경량으로 만들었다는 점이다. 국내 제조업계에서도 이와같은 세력의 영향을 받아 각 사회가 경쟁적으로 개발에 착수하고 있거니와, 거년에 일사회에서 50kVA이하 각 용량의 주상변압기 생산을 개시하게 되어 전업계에서 점차로 권철심형변압기에 관심을 모으게 되어으므로 이하에 권철심형변압기의 특성과 제조과정에 대하여 간단히 기술하고저 한다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.2
• /
• pp.63-70
• /
• 2021

As the government strengthens its policy of separating and discharging packaging materials, consumers are increasingly dissatisfied. In order to increase consumer participation in separate discharge policy of packaging materials, it is necessary to increase the willingness to participate by reducing potential consumer problems such as removal of packaging labels. This study conducted a survey of 300 consumers aged 14 and over who recycle and discharge directly from their homes. Ninety-nine percent of consumers said PET bottles are released separately. However, only 65% of consumers removed labels (attachment labels, shrink labels) and other materials (caps, vinyl coatings, tapes, handles, bases, etc.) during separate discharge process. Nearly 52% of consumers cited 'difficulty of separation' as the main reason for not removing labels and other materials. One-way ANOVA analysis showed that 'strong adhesion', 'removal initiation problem' and 'material strength' had high mean regardless of age, which are major factors impedes label removal. Using shrink labels with perforated lines rather than adhesive labels would be more beneficial to encouraging participation in separate discharge. However, if the shrink labels do not have perforated lines or are difficult to remove, adhesive labels are often easier to remove than shrink labels because of the strong cohesiveness of shrink labels. As a result, how easy it is for consumers to remove the label is more important than technological differences. In order to increase consumer participation in packaging material and label separations, improvements in structural design are needed along with the selection of materials that are easy to separate. This study is meaningful in examining consumer perceptions, deriving problems and suggesting directions for policy improvement.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.58-61
• /
• 2011

This study was conducted to develop an optimal pruning method for okra production. Three pruning methods were tested including apical bud removing, one-third removing from the top of plant, and no pruning as a control with 3 kinds interval for 15 days after 2 months sowing. The growth and development of okra was better at the treatment of one-third removing of plant than the others. The number of branches was 0.7 in control, 3.7~4.0 in apical bud removing, and 3.0~6.0 in one-third removing treatment. In summary, one-third pruning of plant from the top of plant at 30 days after starting of pruning treatment, which showed the highest yield by 12,910 kg/10a.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.4
• /
• pp.364-369
• /
• 2002

Streptomyces shows a eukaryotic characteristic that vegetative cell can grow into mycelial form and has morphological and physiological differentiation at a certain period during its life cycle. Streptomyces has been used for the production of many biologically active compounds, such as antibiotics and pronase. Production of second metabolites and differentiation of the vegetative cell share the certain period of its lift cycle. Therefore, second metabolites may affect the differentiation of the vegetative cell. One of the microbial hormone, called A-factor, regulates the production of second metabolites, sporulation and differentiation of the cells. Streptomyces griseus produces streptomycin as well as many different kinds of proteinase. As mentioned, period of proteinases production overlaps with the period of differentiation of the vegetative cells. Protease may play a important role for the differentiation of the cells. In this paper, function of the SGPD gene cloned from S. griseus IFO 13350 tested whether it affects for the differentiation of A-factor mutated S. griseus HH1 and S. griseus IFO13350. pWHM3 and pWHM3-sprD plasmid was transformed into S. griseus HH1 and S. griseus IFO13350. Chymotrypsin activity of the cultured medium of the transformants with pWHM3-sprD plasmid didn't show any change with that of the transformants with plasmid only. The transformants with pWHM3-sprD plasmid didn't show the increase of the production of actinorhodin as well as morphological change in S. griseus IFO 13350 and HH1, as well. The promoter sequences of the SGPA and SGPB gene which encode chymotrypsin-like protease, were compared with that of SGPD gene. Regulatory mechanism of gene expression of proteinase genes will be studied for the development of high production system for protease as well as the function of the proteases.