• The Journal of Information Technology
• /
• v.1 no.2
• /
• pp.195-208
• /
• 1998

Domestic corporation in High-tech industry invest huge amounts of economic resources into the Research & Development(R&D) department, especially into new product development. It might be an adequate explanation for this phenomena that as the product life cycle gets shorter, and environmental uncertainty necessitates core competency from every corporation, new product planning becomes a vital going concern for the company to keep and increase its market share This could originate from an inappropriate combination between new products and other marketing mix elements. But it could be that the main cause of these failures com from unsatisfactory customers. In the other words, R&D department failed to sufficiently recognize market needs. This could be solved through integration between marketing department R&D department This study supposes that integration between these two departments-marketing department and R&D department influences the success of new product. In other to prove this, this study examined the determinant factors which influence the integration and the relationships

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.49-54
• /
• 2018

In the Active Pharmaceutical Ingredient(API) manufacturing company, since the product is produced by the chemical reaction, fire and explosion are frequently occurred in the process of inputting the raw powder as the chemical reaction stage. There are not many studies on safety measures through analysis of cause of accident in the actual chemical reaction stage. In this study, we investigated the heat flow in the boron removal reaction process to investigate the risk in the chemical reaction stage. The study reaction process was performed by using the reaction calorimeter for the products synthesized at the actual raw material in pharmaceutical factory. The risk was estimated by comparing the maximum temperature of the synthesis reaction, which can generate heat due to the failure of cooling in the actual manufacturing process, and the technical temperature. These results are applied to commercial manufacturing sites and safety measures to control the risk of runaway reaction due to reaction heat are suggested.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.588-592
• /
• 2012

To examine the reason of empty samara production of Chinese elm, Ulmus parviflora, twenty two planted trees in Wonju-si were monitered for three years in terms of their flowering, pollinatiom system and samara characteristics. Inflorescences with bisexual flowers of Chinese elm are developed in the leaf axils on the twigs. Dichogamous flowers are varied with protogynuous and protandrous flower, and stamens in some bisexual flowers are developed in seperated time on a inflorescence or a tree. It is revealed newly that the flower of Chinese elm is out-crossed and partially insect(Apis mellifera) pollinated. The ratios of sound samara are significantly differed among years, the heighest values 65.5% were shown in 2009, lowered 42.9% in 2010, and the lowest 37.5% in 2011. This result might be affected by mean daily precipitation and number of rainy days during the flowering date, and lower temperature during the floral initiation stage, especially in 2011. These findings suggest that Chinese elm has self-incompatibility strategy and much pollination failure resulted in a production of much empty samaras. Further researches on the empty-seed production strategies and pollination system of major tree species might be needed.

• Korean Journal of Veterinary Research
• /
• v.41 no.2
• /
• pp.211-218
• /
• 2001

The $M_r$ 63,000 glycoprotein (GP63) and lipophosphoglycan (LPG) of Leishmania donovani were evaluated as vaccine candidates against visceral leishmaniasis. Mice were immunized with liposomeencapsulated GP63 and/or LPG that were purified from the soluble extract of L. donovani promastigotes, and were challenged with virulent amastigotes. Mice immunized with GP63/LPG in liposomes plus BCG resulted in a 27.4% reduction of amastigotes in the liver compared to the control group (liposomes plus BCG), and mice immunized with liposome-GP63 plus BCG failed to induce a protective immune response against the challenge infection. Immunization of mice with GP63 fused to the Schistosoma japonicum glutathione S-transferase (GP63-GST) plus BCG also failed to elicit protective immunity. To analyze the cause of failure to induce protection, cytokine release from the spleen cells of immunized mice and Leishmania-specific serum antibodies were analyzed. Spleen cells from mice immunized with GP63-GST plus BCG that were exposed to soluble extract of L. donovani in vitro produced 10-fold greater quantities of IFN-gamma and 3-fold greater quantities of IL-5 than cells from mice receiving BCG only or saline. Western blot analysis revealed that sera from these mice had Leishmania-specific antibodies recognizing 1 to 3 antigens of L. donovani with M. W. of 60-65 kDa. Although immunization of mice with GP63-GST induced a strong Th1 response, this study indicated that GP63-GST simultaneously elicited the Th2 response of the CD4+ T-cell, which was known to abrogate the protective immune response conferred by the Th1 effector function.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.54-55
• /
• 2003

해수관상용으로 그 인기도가 높은 상어류는 모두가 자연에서 채집된 후 관람용 대형수조 또는 개인용 소형수조 내에서 순치 후 관상용으로 사육되고 있다. 그러나, 자연에서 채집된 대부분의 개체는 인위적인 수조 시설 내에서의 생활에 적응하는데 실패하여 결국 거의 대부분의 개체가 짧은 기간 내에 사망하게 된다. 따라서 이 연구는 인공 종묘 생산 시설에서 해수 관상용 상어류의 종묘 확보를 목적으로 실시하였다. 우리나라 제주 연안에서 채집이 비교적 용이한 까치상어 Triakis scyllium와 별상어 Cynias manazo 2종의 상어 친어를 확보하여 인공 사육 시설에서 사육하면서 수조 내에서의 자연 교미와 자연 산란에 성공하였다. 친어와 치상어의 사육관리는 자연해수를 사용하여 15~40ton 크기의 콘크리트 수조에서 사육하면서 전갱이와 같은 생사료 또는 전갱이와 어분을 주성분으로 하는 습사료를 만들어 1일 1회 급이하였다. 까치상어의 인공 종묘는 수 차례의 사산을 거듭한 끝에 2003년 5월 18일과 6월 8일 두 차례에 걸쳐서 매우 활력이 좋은 상태의 치어가 출산하였다. 별상어도 수 차례의 사산을 거듭한 끝에 2003년 5월 25일 건강한 상태의 치어를 출산시키는데 성공하였다. 지금까지 산출된 까치상어의 출산시 평균 전장은 25.70$\pm$0.88cm 평균 체중은 58.32$\pm$4.86g이었으며, 별상어의 출산시 치어의 평균 전장은 27.26$\pm$0.57cm였고 평균 체중은 55.32$\pm$1.69g로 두 종 상어의 평균 전장과 평균 체중은 유사한 경향을 보였다. 그러나, 산출 후 사육 관리 과정에서 관찰된 까치상어와 별상어의 월간 성장 중 전장을 비교한 결과, 까치상어는 1개월 전 대비 15.06%의 성장을 보였으나, 별상어는 3.15%의 성장을 보여 까치상어 보다는 별상어의 길이 성장이 느린 것을 알 수 있었다. 까치상어와 별상어의 월간 성장 중 체중을 비교한 결과에서도 까치상어는 1개월 전 대비 34.11%의 성장을 보였으나, 별상어는 2.25%의 성장을 보여 까치상어 보다는 별상어의 체중 성장이 매우 느린 것을 알 수 있었다. 출산 관리중인 까치상어와 별상어 치어의 성비를 조사한 결과, 까치상어는 ♀:♂=1:1.28, 별상어는 ♀:♂=1:2.50으로 별상어의 암 수 성비가 매우 불균형한 것을 알 수 있었다. 그리고 까치상어와 별상어의 암ㆍ수간 성장 차이를 조사한 결과, 까치상어와 별상어의 암ㆍ수간 성장 (전장, 체장 및 체중)에는 큰 차이가 없었다. 현재, 인공 사육 시설에서 관리중인 까치상어는 64마리이며 별상어는 7마리이다. 결국 소형의 수족관내에서 해수 관상어로서 사육하기 위한 조건으로서 너무 급격한 성장을 하는 어종인 경우에는 관상 기간이 짧아져 조기 폐기하여야 하는 단점을 감안하면 까치상어 보다는 별상어의 관상가치가 높을 것으로 판단되며, 반대로 대형 관람용 수족관의 경우에서는 별상어 보다 성장이 빠르고 운동력이 활발한 까치상어를 전시관람용으로 이용할 경우 전시효과가 높을 것으로 판단된다.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.2
• /
• pp.118-123
• /
• 2008

For effective production of interspecific hybrids of Lilium and valuable new cultivars, we used Lilium Asiatic hybrid 'Tiny Ghost' as the female parent, and Oriental group, and Longiflorum group and Martagon as the male parents. Percentage pollen germination in Oriental hybrid 'Sorbonne' was the highest with 64%. As results of using normal style pollination and cut style pollination methods, all seed sets were formed in normal style pollinated treatment, except in 'Aktiva'. Pollen germination percent of Longiflorum hybrid 'Norina' was higher than that 'Gelria'. However, all crossings using 'Norina' failed to set seeds. Corresponding fertilization ratio was different from genetic compatibility, even in the same group. From the crossing using 'Aktiva' as the male parent one bulb was obtained derived from one embryo sac. And using 'Sorbonne' as the male parent, one plantlet was obtained after four ovule cultures. Crossing using 'Gelria' as the male parent five embryos, 15 embryo sacs, and seven ovules per one ovary were obtained. Among them, 18 plantlets germinated, with the germination percent of 66.7%. Crossings using L. hansonii, Martagon group, as the male parent resulted in 40% germination from five ovules.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.2
• /
• pp.125-136
• /
• 2017

This study focuses on a relative efficiency of 109 operating food companies out of 22 regions in Jeollanam-do. The relative efficiency has been analyzed by 5 input factors(capital, number of employees, annual labor costs, raw material purchase, and site area) and 2 output factors(annual exports and annual production of the companies in Jeollanam-do). This study suggests efficient companies which inefficient companies can benchmark to improve their system in short-mid-long term in phases. The main result of empirical analysis are as follows: Firstly, according to the Traditioanl DEA analysis, 7 companies out of 109 DMU indicate the optimal production scale in score 1 of CCR efficiency value, BCC efficiency value, and scale efficiency value. Secondly, a result from the Tier 1 step of inefficient companies by Post-DEA suggests that it would be better to apply each Tier step to the proper stage of the worst 5 inefficient companies such as Tier 3 step(short-term benchmark)${\rightarrow}$Tier 2 step(mid-term benchmark)${\rightarrow}$Tier 1 step(long-term benchmark) in step. This study expects that the result of the study can reduce the trial and error in inefficient part, lead to improvement, and have a big help in food exporting industry in the end.

• Journal of Service Research and Studies
• /
• v.8 no.3
• /
• pp.115-136
• /
• 2018

Recently R&D projects take a collaborative works which involve industries, research institutions, and academic fields together. Collaborative R&D enjoys the economy of scales and economic efficiencies in that costs and risks share each others and compensate their competences. But there are some problems. The imbalance of power, the asymmetry of information, loss of trust, and opportunism among the co-researchers make the collaborative R&D difficult to succeed and disappointed outcomes. There are many variables on explaining the interorganizational relationships. Among them, I choose some relevant variables, construct research model and some hypotheses. Independent variables are fairness and quality, and dependent variables is loyalty. And trust are treated as the intervening variable between the independent variables and dependent variable. To test the research model and some hypothesis empirically, I collected the data using the questionnaire, The questionnaire was distributed to the persons that do collaborative R&D in Daeduck Innopolis. Sample size was 448, it was enough to analyze statistically. Data were analysed using the SPSS and AMOS. Procedural fairness and distributive fairness affect the organizational trust positively, and procedural fairness and distributive fairness affect member trust positively. Procedural quality and outcome quality affect the organizational quality positively. Procedural quality affects the member trust positively, but outcome quality does not affect member trust. Procedural fairness and distributive fairness does not affect the loyalty positively. Procedural quality does not affects loyalty, but outcome quality affects the loyalty positively. The organizational trust affects loyalty positively, and member quality affect loyalty positively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.135-141
• /
• 2019

South Korea's smart factory drive is at a very important point. While large-scale funds and manpower are invested to secure international competitiveness and revitalize manufacturing, software investments that are only approached by IT suppliers may end up creating systems that do not meet the actual conditions of the field. As a result, there are problems in the manufacturing sector that can cause consumers to feel the fatigue of innovation in the manufacturing sector. SMEs should check from scratch and establish a gradual integration system so that they can reduce failures in IT investments and implement OT-oriented smart factories that are well utilized in the field. To this end, a process visualization solution was proposed and a step-by-step innovation was proposed at the basic level and the ICT unapplied level.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.98-105
• /
• 2021

Recently, there have been many changes in the domestic construction industry. OSC (Off-Site Construction) is expected to solve these problems, and it is emerging as a way to inspire innovation in the domestic construction production system. OSC, which has only recently attracted attention again after previous studies have failed, is lacking in research on preception surveys and customized performance measurements compared to overseas. This study investigated the perceptions of construction industry workers on OSC through a survey, and examined differences in perceptions of each subject and the relative importance of performance indicators. In general, the need for introduction and development of OSC was recognized. Also, drivers and obstacles inhibiting more use of OSC were analyzed. The relative importance for performance indicators and differences in perceptions of each subject were identified. Then, this study suggests plans for diffusion and revitalization of OSC, and key performance indicator for OSC based PC structure apartment housing.