• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.21-21
• /
• 2002

독일, 미국, 일본 등 세계 주요 선진국운 도금전문 중소기업들이 각 산업분야의 첨단 핵심부품의 기능화, 신기능-신제품 창출에 크게 이바지하고 었으며, 도금 및 표면처리 관련 전문연구소와 전문고굽 기술인력이 정부 및 사회단체의 지원으로 끊임없이 관련 기술의 연구와 개발에 여념이 없으며, 관련업계와의 교류에 있어서도 활발하다. 특히 도금설비, 자동화장치, 폐수처리 등 도금관련기술에 1970년대부터 연구개발을 시작 하여 실용화하고 있으며, 최근에는 분자규모 표면제어기술과 제 4세대 도금기술(저가 격-고품질-환경융화-개성화)의 연구 및 상품화를 구축하고 었다. 또한, 도금약품 분야 도 오랜 공업화 역사와 강력한 기초산엽을 기반으로 하여 고효융, 고성능화를 설현 실용화단계에 접어들었으며, 설비자동화와 함께 세계적 환경문제와 관련된 무공해, 저 공해화의 연구를 통해 세계시장을 지속적으로 선점하고 있는 실정이다. 국내의 경우, 근대 공업화의 늦은 출발과 수출을 통한 산업발전에 기인된 대기업 중 심의 산업구조, 그리고 수출목표 지향의 제품생산, 조립위주 등의 원인으로 산업기반 기술인 도금기술과 이와 관련된 기초, 핵심기술이 여전허 낙후되어 있으며, 해외의존 도에 있어서 지리척으로 가까운 일본의 영향이 크고, 기타 선진국으로부터 기술도입, 원자재수입에 의해 영위되어 오고 있는 실정이다 또한 영세성 소규모 업체로 구성되어 기술개발 자체도 수요의 한정 및 연관 산업과의 정보부족으로 실효성이 적으며­관련 전문 연구기관, 연구장벼 및 전문 기술인력이 선진국과 비교하여 절대 부족한 현실에 놓여었다. 연구시설, 연구인력의 절대부족, 기초연구 재원 및 국가적 전략지원 연구 및 기본 INFRA 구축이 부족한 국내 현실을 인식하여 한국기계연구원에서는 업계가 직면하고 있는 표면처리 관련기술 제반문제에 대한 실질적이고 다양한 내용 즉, 기술지도 및 지원, 기술훈현 및 연수, 품질-시험 인증을 위한 실험.측정장비의 구입 및 업계와의 공동활용, 국내.외 최신기술 정보자료의 수집과 신속제공, 국내.외 전문가 초청 활 용, 미래 지향적 목적활용 기초연구사업 수행, 미래기술 동향예측 및 홍보 등을 통해 서 국내 도금기술의 기술자립 및 고도화를 위한 여건마련을 위하여 노력하고 있다.

• Journal of the Korea Concrete Institute
• /
• v.13 no.3
• /
• pp.294-300
• /
• 2001

The effectiveness of bottom ash on the mechanical and physical properties of Controlled Low-Strength Material(CLSM) is investigated in this study, CLSM is defined by the ACI Committee 229 as a cementitious material that is in a flowable state at the time of placement and having a specified compressive strength of 83 kgf/$\textrm{cm}^2$ or less at the age of 28 days. This study was undertaken on the use of bottom ash as a fine aggregate in CLSM. Four different levels of bottom ash with fly ash contents, 25%, 50 %, 75%, 100%, are investigated. Laboratory test results conclude that inclusion of bottom ash increases the demand for mixing water in obtaining the required flow. However, the sand was reduced because it was adjusted to maintain a constant total volume. Miかe proportions were developed for producing CLSM at three 28-day strength levels: removal with tools (less than 7 kgf/$\textrm{cm}^2$), mechanical means (less than 20 kgf/$\textrm{cm}^2$), and power equipment (less than 83 kgf/cm\`). The physical and mechanical properties supports the concept that by-product bottom ash can be successfully used in CLSM.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.310-313
• /
• 2016

In this paper, we propose the tester apparatus for 48 channel GM Tube sensor. The proposed apparatus can test up to 48 channel GM tube simultaneously to detect the defect and analyze the sensor characteristic. 300-1000V variable high voltage generation circuit is utilized for the apparatus suitable for the sensor characteristic. Thus, the proposed system is useful for various GM Tube sensor characteristic analysis. Multiple sensor testing environment is established for the early detection of the defect and the analysis to reduce the costs for manufacturing and rework. Developed 48 channel GM Tube sensor test is evaluated with certified testing equipment and shows excellent performance with respect to the uncertainty of the sensor test results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.593-593
• /
• 2016

최근 기후변화에 따른 국내 기상특성이 변화함에 따라 가뭄, 하천건천화, 홍수 등 물 관련 재해 발생 빈도 및 규모가 점점 커지고 있으며, 세계적으로 홍수 발생 빈도뿐만 아니라 태풍 및 가뭄 발생 빈도도 꾸준히 증가하고 있어 광범위한 관측과 정확한 예측 및 즉각적 대처능력 확보를 위한 수재해 관리가 필요한 실정이다. 아울러 급격한 도시화에 따라 내수범람이 빈번하게 발생하기 때문에 재난발생 시 그 피해가 극대화로 직결되고 있어 도시에서 발생할 수 있는 내수범람을 정확하게 예 경보하기 위한 고해상도 실시간 강수관측이 필요하다. 또한, 유역차원의 홍수범람이 빈번하게 발생하고 있으며, 홍수기 홍수통제소의 댐수문 관리에 어려움이 따라 기상관련 재난이 발생할 수 있어, 유역 차원의 정확한 홍수량 예측과 예 경보 시스템 구축을 위해서는 고해상도의 실시간 강수관측을 통한 강수예측 기술이 중요하다. 이를 위해 위성, 레이더, AWS 등 각종 광역 관측 장비로부터 표출되는 데이터를 통합하고, 이를 종합적으로 분석하여 수리수문인자 및 기상인자로 전환할 수 있는 시스템을 개발 할 경우 가뭄, 하천 건천화, 홍수 등을 실시간으로 감시하고 평가 예측 할 수 있는 정보 생산이 가능할 것으로 판단된다. 이에 본 연구에서는 수재해 정보 플랫폼 서비스를 위하여 전체적인 시스템을 개발하기에 앞서 가능성을 타진하고 검증할 필요가 있는 주요 구간을 시험하는 개발 기법인 프로토타입을 우선적으로 개발한다. 주요 항목으로는 (1) 지속 산출 격자 자료에 대한 OGC WxS 또는 LOD 서비스 자동 연계, (2) 격자 자료 ?춤형 제공(해상도, 좌표계 등), (3) 기초, 분석 정보 제공 시스템 등을 프로토타입 대상으로 설정하고 웹 기반 수재해 정보 플랫폼 인터페이스를 구현한다. 개발된 플랫폼은 수재해 예측정보의 정확도를 향상시키고 국지적 침수재해 평가 예측 및 지역 맞춤형 재해평가 체계를 실현함으로써 국가 물 관련 재해를 혁신할 수 있는 기술을 확보하는 소중한 토대가 될 것으로 사료된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.6
• /
• pp.451-461
• /
• 2010

Utilization of the fiber reinforced polymer (FRP) material has been enlarged as a substitution material to the general construction materials having certain long-term problems such as corrosion, etc. However, it could be difficult to apply the FRP material, which has a linear shape generally, to an arch-shaped tunnel structure. Therefore, an attempt has been made in this study to develop a device to form a designed cross section of FRP material by pulling out with a curvature. A sample of the circled FRP product was successfully produced and then the sample has been tested to identify its physical characteristics. Then, intensive feasibility studies on the circled FRP panel to be used for a tunnel lining structure have been carried out by numerical analyses. As a result, it appears that the new circled FRP-concrete composite panel has a high capability to be used for a tunnel lining material without any structural problem.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.13-25
• /
• 2007

Viscosity, adhesion and cohesion of asphalt binder are very important characteristics in asphalt pavement. However, these characteristics can cause some problems such as inaccurate amount of asphalt mixture, reduction of asphalt content and loss of workability during asphalt pavement construction. Asphalt release agent has been used to solve these problems. Diesel oil and vegetable oil are generally used as an asphalt release agent in Korea. However, these agents have been criticized from environmental and binder integrity reasons. Therefore, this study evaluated the characteristics of asphalt release agents including diesel oil, vegetable oil and two emulsion type oils. From the study, it was found that the diesel oil resolved the binder within ten minutes and vegetable oil stripped the binder from mixture within one hour after contacting with asphalt mixture. And also, from the test for estimating the application cycle of asphalt release agent, it appears that diesel oil and vegetable oil should be applied to construction equipments every time in their uses. However, diesel oil and vegetable oil showed a good performance as a lubricant for detaching the asphalt mixtures from the truck bed.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.899-908
• /
• 2004

The rise of income and introduction of 5 day a week working system give korean people opportunities to enjoy their leisure time. And many korean people have much interest in oceanic sports such as yachting and also oceanic leisure equipments. With the popularization and development of the equipments, the scope of oceanic activities has been expanding in Korea just as in the advanced oceanic countries. However, The current conditions for the sports in Korea are not advanced and even worse than underdeveloped countries. In order to develop the underdeveloped resources of Korean marina, we need to customize the marina models of advanced nations to serve the specific needs and circumstances of Korea As such we have carried out a comparative analysis of how Austrailia, Newzealand, Singapore, japan and Malaysia operate their marina, reaching the following conclusions. Firstly, in marina operations, in order to protect personal property rights and to preserve the environment, we must operate membership and non-membership, profit and non-profit schemes separately, yet without regulating the dress code entering or leaving the club house. Secondly, in order to accumulate greater value added, new sporting events should be hosted each year. There is also the need for an active use of volunteers, the generation of greater interest in yacht tourism, and the simplification of CIQ procedures for foreign yachts as well as the provision of language services. Thirdly, a permanent yacht school should be established, and classes should be taught by qualified instructors. Beginners, intermediary, and advanced learner classes should be managed separately with special emphasis on the dinghy yacht program for children. Fourthly, arrival and departure at the moorings must be regulated autonomically, and there must be systematic measures for the marina to be able, in part, to compensate for loss and damages to equipment, security and surveillance after usage fees have been paid for. Fifthly, marine safety personnel must be formed in accordance with Korea's current circumstances from civilian organizations in order to be used actively in benchmarking, rescue operations, and oceanic searches at times of disaster at sea.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.101-114
• /
• 2007

Dowel bars in the jointed concrete pavement are used to both provide load transfer across pavements joints and prevent the joint faulting leading to longer service life. On the contrary, the misplacement of dowel bar can provide negative results including the joint freezing(locking) that may cause the joint spatting and unexpected mid-slab cracking. The dowel bar can be placed using the assembly or dowel bar inserter (DBI) during the concrete pavement construction. In the domestic practice of the concrete pavement construction, the dowel bar is placed using the assembly method. This study primarily focuses on the comparison of these two dowel placement methods using the field data from the KHC test road in which both dowel placement methods have been applied to a certain length of the concrete pavement. The field data regarding the alignment of the dowel bars placed by both methods was collected using MIT-SCAN2, a nondestructive measuring equipment, and processed to compute Joint Score and Running Ave. Joint Score which are used as indicators of the dowel bar performance. The comparison of the methods for the dowel bar placement using these indicators shows that the DBI method provided much better alignment of the dowel bars reducing the risk of joint freezing than the assembly method. In order to improve the quality of the dowel bar placement using the assembly method, the current weak points of the assembly method including the fabrication, storage, and installation of dowel bar assembly were investigated and the solution was suggested. The improved dowel bar sets based on the suggested solution have been applied to an actual practice of the concrete pavement construction. The field data shows that the improved assembly method suggested in this study can highly reduce the risk of joint freezing.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.113-121
• /
• 2001

Among the currently available binder specifications, Superpave Performance Grade asphalt specification is regarded as a superior specification on its theoretical background as well as pavement performance relationship. Many difficulties are expected; however, for Superpave implementation in Korea because of heavy burden of equipment cost as well as lack of trained personnel in asphalt industry, which may too much barrier to overcome in Korean situation. As an effort to improve qualify of asphalt binder, recently, people discuss about a possibility of constituting a performance-based asphalt specification using rather easy-to-measure asphalt properties. The objective of this paper is to determine the possibility of constituting a performance-based asphalt specification using an empirical asphalt properties, such as penetration ring and ball softening point rather than using fundamental properties of asphalt. Nine straight asphalts, that covers entire straight asphalt from all Korean refineries, and eighteen modified asphalts that were modified from two modifiers were included in the study. An analysis was made through a comparison between empirical properties and Superpave PG criteria. This study concluded that it may possible to constitute a pseudo-Superpave-like specification using an empirical asphalt properties as a specification criteria. Therefore, more systematic research is needed to constitute the asphalt specification.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2009

A new mix design procedure for cold in-place recycling using foamed asphalt (CIR-foam) has been developed for Iowa Department of Transportation. Some strengths and weaknesses of the new mix design parameters were considered and modified to improve the laboratory test procedure. Based on the critical mixture parameters identified, a new mix design procedure was developed and validated to establish the properties of the CIR-foam mixtures. As part of the validation effort to evaluate a new CIR-foam mix design procedure, dynamic moduli of CIR-foam mixtures made of seven different reclaimed asphalt pavement (RAP) materials collected throughout the state of Iowa were measured and their master curves were constructed. The main objectives of this study are to provide: 1) standardized testing procedure for measuring the dynamic modulus of CIR-foam mixtures using new simple performance testing (SPT) equipment; 2) analysis procedure for constructing the master curves for a wide range of RAP materials; and 3) impacts of RAP material characteristics on the dynamic modulus. Dynamic moduli were measured at three different temperatures and six different loading frequencies and they were consistent among different RAP sources. Master curves were then constructed for the CIR-foam mixtures using seven different RAP materials. Based upon the observation of the constructed master curves, dynamic moduli of CIR-foam mixtures were less sensitive to the loading frequencies than HMA mixtures. It can be concluded that at the low temperature, the dynamic modulus is affected by the amount of fines in the RAP materials whereas, at the high temperature, the dynamic modulus is influenced by the residual binder characteristics.