• 제목/요약/키워드: 생물측정학

Search Result 778, Processing Time 0.026 seconds

Performance of a Hellow Fiber Membrane Diffuser for the Biological Removal of Gaseous BTX (Diffuer 형태의 중공사막 생물반응기를 이용한 기체상 BTX 제거)

  • Son, Young-Gyu;Khim, Jee-Hyeong;Song, Ji-Hyeon
    • Journal of Soil and Groundwater Environment
    • /
    • v.11 no.4
    • /
    • pp.25-32
    • /
    • 2006
  • In this study, a novel bioreactor system using a diffuser type hollow fiber membranes (hollow fiber membrane diffuser, HFMD) was applied to investigate the feasibility and biodegradation capacity for the treatment of a gaseous mixture consisting of benzene, toluene and p-xylene(BTX). First, A mixed culture pre-acclimated to toluene effectively biodegraded the BTX mixture at an overall removal efficiency of approximately 70% for a 20-day operational period. It was found that the biodegradation of toluene was slightly inhibited because of the presence of benzene and p-xylene. Second, the elimination capacity (EC) of total BTX increased up to 360 $g/m^3/hr$, which was substantially higher than maximum ECs for BTEX reported in the biofiltration literature. Consequently, the hollow fiber membrane diffuser was considered as an alternative method over other conventional VOC-treating technologies such as biofilters.

바이오매스 구성성분 중 리그닌의 전환에 관한 연구

  • Yun, Seong-Uk;Lee, Byeong-Hak
    • 한국생물공학회:학술대회논문집
    • /
    • 2000.11a
    • /
    • pp.733-736
    • /
    • 2000
  • Lignin is usable as fuels and heavy oil additives if depolymerized to monomer unit, because the chemical structures are similar to high octane materials found in gasoline. In this study, the solvent-phase thermal cracking(solvolysis) of lignin was performed at the various temperature and time in a laboratory tubular reactor. Conversion yield was measured for the properties of thermal cracking and liquefaction reaction of lignin. Highest conversion yield when acetone was used as thermal cracking solvent was 55.5% at $350^{\circ}C$, 50minutes and highest tar generation were $260{\sim}350mg/g\;{\cdot}\;lignin$ at $250^{\circ}C$, and highest conversion yield after tar removal was 76.88% at $300^{\circ}C$, 30minutes. Conversion yield, product compositions and amounts were determined by tar degradation yield.

  • PDF

Analysis of toxicity using bio-digital contents (바이오 디지털 콘텐츠를 이용한 독성의 분석)

  • Kang, Jin-Seok
    • Journal of Digital Contents Society
    • /
    • v.11 no.1
    • /
    • pp.99-104
    • /
    • 2010
  • Numerous bio-digital contents have been produced by new technology using biochip and others for analyzing early chemical-induced genes. These contents have little meaning by themselves, and so they should be modified and extracted after consideration of biological meaning. These include genomics, transcriptomics, protenomics, metabolomics, which combined into omics. Omics tools could be applied into toxicology, forming a new field of toxicogenomics. It is possible that approach of toxicogenomics can estimate toxicity more quickly and accurately by analyzing gene/protein/metabolite profiles. These approaches should help not only to discover highly sensitive and predictive biomarkers but also to understand molecular mechanism(s) of toxicity, based on the development of analysing technology. Furthermore, it is important that bio-digital contents should be obtained from specific cells having biological events more than from whole cells. Taken together, many bio-digital contents should be analyzed by careful calculating algorism under well-designed experimental protocols, network analysis using computational algorism and related profound databases.

Accurate Quality Control Method of Bone Mineral Density Measurement -Focus on Dual Energy X-ray Absorptiometry- (골밀도 측정의 정확한 정도관리방법 -이중 에너지 방사선 흡수법을 중심으로-)

  • Kim, Ho-Sung;Dong, Kyung-Rae;Ryu, Young-Hwan
    • Journal of radiological science and technology
    • /
    • v.32 no.4
    • /
    • pp.361-370
    • /
    • 2009
  • The image quality management of bone mineral density is the responsibility and duty of radiologists who carry out examinations. However, inaccurate conclusions due to lack of understanding and ignorance regarding the methodology of image quality management can be a fatal error to the patient. Therefore, objective of this paper is to understand proper image quality management and enumerate methods for examiners and patients, thereby ensuring the reliability of bone mineral density exams. The accuracy and precision of bone mineral density measurements must be at the highest level so that actual biological changes can be detected with even slight changes in bone mineral density. Accuracy and precision should be continuously preserved for image quality of machines. Those factors will contribute to ensure the reliability in bone mineral density exams. Proper equipment management or control methods are set with correcting equipment each morning and after image quality management, a phantom, recommended from the manufacturer, is used for ten to twenty-five measurements in search of a mean value with a permissible range of ${\pm}1.5%$ set as standard. There needs to be daily measurement inspections on the phantom or at least inspections three times a week in order to confirm the existence or nonexistence of changes in values in actual bone mineral density. in addition, bone mineral density measurements were evaluated and recorded following the rules of Shewhart control chart. This type of management has to be conducted for the installation and movement of equipment. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. Bone mineral density inspection was applied as the measurement method for patients either taking two measurements thirty times or three measurements fifteen times. An important point when taking measurements was after a measurement whether it was the second or third examination, it was required to descend from the table and then reascend. With a 95% confidence level, the precision error produced from the measurement bone mineral figures came to 2.77 times the minimum of the biological bone mineral density change. The value produced can be stated as the least significant change (LSC) and in the case the value is greater, it can be stated as a section of genuine biological change. From the initial inspection to equipment moving and shifter, management must be carried out and continued in order to achieve the effects. The enforcement of proper quality control of radiologists performing bone mineral density inspections which brings about the durability extensions of equipment and accurate results of calculations will help the assurance of reliable inspections.

  • PDF

Inherent Optical Properties of Red Tide Algal for Ocean Color Remote Sensing Application (해색원격탐사 활용을 위한 적조생물종 고유 광특성 연구)

  • Ahn, Yu-Hwan;Moon, Jeong-Eon;Seo, Won-Chan;Yoon, Hong-Joo
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.12 no.1
    • /
    • pp.47-54
    • /
    • 2009
  • This research is about the inherent optical properties(IOPs) of algae which is collected from Nam-Hae for basic research of red tide remote sensing technique development. 21 kinds of red tide organisms were cultivated to investigate IOPs of them in the level of laboratory, and specific absorption coefficient of phytoplankton($a^*$) and backscattering coefficient of phytoplankton(${b_b}^*$) are estimated by using spectrophotometer. Absorption spectrums according to species appeared to range from 0.005 to 0.06 ($m^2{\cdot}mg^{-1}$), and the shapes of spectrums were also different. The range of ${b_b}^*$ appeared to be $10^{-2}{\sim}10^{-4}\;m^2{\cdot}mg^{-1}$, which had about 100 times differences between species, and the shape of spectrum have significant difference between species. These results will input as a remote sensing reflectance model input parameter from ocean color.

  • PDF

Nitrogen Regeneration and Glutamate Dehydrogenase Activity of Macrozooplandton in the Southeastern Sea of Korea (韓國 東南海域에서의 動物性 浮游생物에 의한 窒素營養 再酸環 및 Glutamate dehydrohenase의 생化學的 酵素 活性度에 關한 硏究)

  • 박용철
    • 한국해양학회지
    • /
    • v.21 no.2
    • /
    • pp.110-117
    • /
    • 1986
  • In southeastern sea of Korea, ammonium excretion rates of mixed macrozooplankton population ranged from 0.90 to 2.32$\mu\textrm{g}$ atoms NH$\_$4/-Nm$\^$-3/h$\^$-1/ and zooplankton excretion contributed from 3 to 15% of total nitrogen requirement by phytoplankton. Wet weight specific ex cretion rate was averaged to be 3.45$\mu\textrm{g}$ atoms NH$\_$4/-Ng$\^$-1/wet weight h$\^$-1/. Zooplankton biomass in wet weight and protein tended to increase to ward outer outer shelf. GDH assay of macrozooplankton demonstrated a typical Michaelis-Mentenkinetics with 5.1mM of half saturation constant(Km). Protein specific GDH activity in the present study ranged from 1.5 to 3.2$\mu\textrm{g}$ atoms NH $\_$4/-N mg$\^$-1/protein h$\^$-1/. Higher protein specific GDH activity in the outer shelf implies that zooplankters in the outer shelf were more active in nitrogen metabolism grazing higher primary production in the outer shelf. In the present study, averaged GDH/excretion ratio was 18.8${\pm}$2.6(n=6)showing high correlation between zooplankton GDH activity and direct ammonium excretion rate by zooplankton. GDH assay can be extremely useful in the future study for the ammonium regeneration by different size zooplankton fraction in various marine environments.

  • PDF

The Activity of Succinic Dehydrogenase During the Metamorphosis on the Pine Moth, Dendrolimus spectabilis BUTLER (송충의 변태에 따른 Succinic Dehydrogenase 의 활성도)

  • 김창환;류종명
    • The Korean Journal of Zoology
    • /
    • v.9 no.2
    • /
    • pp.7-9
    • /
    • 1966
  • 송충(Dendrolimus spectabilis)의 변태에 따른 succinic dehydrogenase 의 활성도를 Thunberg 관법을 이용하여 측정하였다. 일반적으로 생성도의 변동은 기관발생과 밀접한 관계를 가지고있으며 각 기관에 있어서의 활성도는 아래와같다. 1. Gut는 여러 기관중 제일 높은 활성도를 보여주며 fat body 와 더불어 U자 모양 curve의 활성도를 나타내고 있다. 2. Brain 과 testis 는 상승의 활성도를 보여주었다. 3. Body wall 과 verve cord의 활성도는 불규칙적이었다.

  • PDF

Design of Gene Alignment Program(FastA) Using Carpool and Grouping Schemes (카풀 및 그룹핑 기법을 이용한 유전자 서열 정렬 프로그램(FastA) 설계)

  • 이성준;김재훈;정진원;이원태
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2003.04a
    • /
    • pp.124-126
    • /
    • 2003
  • 생물정보학에서 사용되는 많은 프로그램들은 데이터베이스로 부터 방대한 양의 데이터를 검색하고 처리한다. 이러한 환경에서 사용자의 요청마다 데이터베이스를 검색하는 경우 사용자들의 대기 시간이 길어지고 시스템 용량을 초과한다. 이러한 데이터베이스 액세스의 문제점을 해결하기 위하여 카플 기법과 그룹핑 기법이 제안되었다. 본 논문에서는 카플 기법과 그룹핑 기법을 이용하여 유전자 서열 비교 프로그램인 Fasta를 구현하였고 사용자 응답시간을 측정하여 프로그램의 성능을 높일 수 있음을 확인하였다.

  • PDF

DNA칩을 이용한 위암의 진단 및 예후 측정

  • Eom Won-Seok
    • Proceedings of the Korean Society for Bioinformatics Conference
    • /
    • 2006.02a
    • /
    • pp.11-18
    • /
    • 2006
  • 바이오칩의 대표 주자인 DNA 칩은 점차 분자생물학의 주요 도구로 인식되고 있다. 쓰임새 또한 다양해져 기초 생물학, 기능 유전체학 연구뿐만 아니라 임상 현장에서의 적용을 위한 연구가 활발히 진행되고 있다. 임상분야에서 최근 주목 받고 있는 분야가 DNA 칩을. 이용한 질병진단 및 예후 측정이다. 개별 환자 세포의 분자유전학적 상태는 DNA 칩의 유전체 프로파일링(genome-wide profiling)으로 상세히 파악될 수 있으므로, DNA 칩은 질병의 세부아형 진단, 약물에 대한 개인 민감도 측정, 정확한 예후 측정을 통한 환자의 세심한 관리 등 미래 의료의 핵심이라 할 수 있는 개인별 맞춤 치료(personalized medicare)를 가능하게 하는데 지대한 역할을 할 것으로 기대되고 있다. 특히 수많은 질병 중에서 현대인의 난치병으로 손꼽히는 암은 DNA 칩 분석의 주요 적용 대상이다. 암에 연관된 복잡한 메커니즘을 기존의 단일 표지자로 진단하는 데는 한계가 있기 때문에, DNA 칩을 이용해 질병의 특정 phenotype과 관련 있는 암의 특이 패턴을 전사체 수준에서 분석하여 새로운 형태의 분자유전학적 표지자(transcriptional molecular signature)를 발굴하는 것이다 본 발표에서는 이러한 연구에 쓰이는 DNA 칩 분석 방법들과 실제 위암 데이터에 적용한 사례에 대해 논의하고자 한다. 연세의대 암전이 연구센터의 17K cDNA 칩을 이용하였으며, 진단 및 예후 측정을 위한 여러 분석 방법을 수행하였다.

  • PDF

Technology Teachers' Motivation toward Teaching Biotechnology (생물기술교육에 대한 기술교사의 동기유발)

  • Kwon, Hyuksoo
    • 대한공업교육학회지
    • /
    • v.34 no.1
    • /
    • pp.252-273
    • /
    • 2009
  • Due to the importance of biotechnological literacy, the educational community in fields such as technology education, science education, and agricultural education has acknowledged the importance of biotechnology instruction for secondary school. Although recognized as a content organizer in the field of technology education, the actual teaching of biotechnology has not been broadly implemented in technology education classes. In the perspective of expectancy-value theory, technology teachers' motivation is the key factor for affecting the biotechnology instruction. This study investigates Korean technology teachers' motivational beliefs toward biotechnology and its instruction and their perceived ability and value toward biotechnology learning contents. To measure their motivational beliefs and attitudes, a composite on-line survey (fifteen motivational beliefs items, eight biotechnology content items, and related demographic items) was developed. Based on 114 Korean technology teachers' responses the researcher performed a descriptive analysis, independent t-test, and factor analyses (exploratory and confirmatory factor analysis using M-plus 5.0 and SPSS 16.0). Korean technology teachers' abilities toward eight biotechnology contents indicated lowscores while their values were relatively high. Through the independent sample t-test by two demographic variables (gender and professional development), this study found several significant differences in the perceived value. As a preliminary finding of exploratory factor analysis, fifteen items was separated into two motivational constructs of expectancy (6 items) and value (8 items). One item (item #6) was eliminated due to the cross loading. The final findings of this study may have significant implications for professional development regarding biotechnology and its instruction (both in-service and pre-service training) of technology teachers. Also, the confirmatory facctor analysis supported the preliminary finding. Finally, this study recommends that a validity test for other population, investigation for motivational sub-constructs, and in-depth investigation toward biotechnology instruction.