• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.7-14
• /
• 2011

Bacillus subtilis JK-1 showed degradation activity against crude oil, gasoline, kerosene, and light oil, and this strain was used as a crude biosurfactant producing microorganism in this study. To optimize the culture medium for production of crude biosurfactant, the influences of various carbon, nitrogen and mineral sources were assessed. The highest biosurfactant production by B. subtilis JK-1 was observed after 96 h cultivation, containing 1.0% (w/v) soluble starch as a carbon source and 0.5% (w/v) skim milk as a nitrogen source, and carbon to nitrogen concentraion (C/N) ratio was 2.0. For the biosurfactant production 0.1% (w/v) of $KNO_3$ was the most effective mineral source. Comparison of biosurfactant production indicates that B. subtilis JK-1 produces more biosurfactant in the optimum medium established in this study than LB and TSB. Under the optimum medium, the surface tension of culture broth of B. subtilis JK-1 was decreased from 47.3 dyne/cm to 24.0 dyne/cm after cultivation of 48 h.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.13-22
• /
• 2002

Soil washing by surfactants is a technology to enhance mobilization and subsequent degradation of oil pollutants by reducing the surface tension of pollutants which is combined with soil. In this study, biosurfactant, rhamnolipid was produced from Pseudomonas aemginosa ATCC 9027 which had an excellent biodegradable activity in soil without causing secondary pollution. Effects of chemical surfactants on the removal of diesel from diesel-contaminated soil were compared to those of biosurfactants including rhamnolipid. Diesel removal efficiency by rhamnolipid extracted from P. aeruginosa culture broth was over 95% in both batch and column washing test in 5,000ppm diesel-contaminated soil with 1% surfactants after washing for 24 hours. On the contrary, the results of chemical surfactants were below 50∼80%, The chemical surfactants with HLB value(8∼15) showed more then 75% efficiency of diesel removal. But, when the HLB values were below 8 or over 15. their efficiency were observed as less then 60% of diesel removal. Rhamnolipid, biologically produced surfactants, may also be promising agent for enhancing diesel removal from contaminated soil.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.346-351
• /
• 2010

The purpose of this work was to investigate the characteristics of a biosurfactant-producing bacterium isolated from crude-oil contaminated soils. During the incubation of strain HK-3 with 1% crude-oil, bacterial growth pattern, the amount of biosurfactant production, and pH changes were monitored. In order to examine the effect of supplemented carbons on the production of biosurfactant, cultivation of HK-3 cells in BH media with different carbons (e.g. glucose, dextrose, mannitol, citrate, or acetate) revealed that the production of biosurfactant reached the maximal level at the 72 h incubation with mannitol, which the area of clear zone was measured to approximately 7.64 $cm^2$. Identification test using the BIOLOG system, morphology study based on scanning electron microscopy and the 16S rRNA sequence-based phylogenetic analysis assigned strain HK-3 to a Pseudoalteromonas species, designated as Pseudoalteromonas sp. HK-3 which was registered in GenBank as [FJ477041].

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.171-176
• /
• 2003

Productivity of biosurfactant (rhamnolipid) by Pseudomonas aeuginosa F722 was investigated in the several culture conditions and culture composition. Biosurfactant production by P. aeuginosa F722 was amounted to 0.78 g/l as the result of the nitrogen sources and carbon sources without investing of optimum conditions. As for that one was investigated, biosurfactant production by P. aeruginosa F722 was amounted to 1.66 g/l. Biosurfactant production increased twofold because the composition of a modified C-medium was investigated efficiently. $NE_4$Cl or $NaNO_2$ inorganic nitrogens and yeast extract or trypton organic nitrogens were effective, but others inorganic nitrogens and organic nitrogens tested were not efficient far biosurfactant production by P. aeruginosa F722. The optimum concentration of $NH_4$Cl; inorganic nitrogen and yeast extract; organic nitrogen were 0.05% and 0.1%, respectively. In various carbon sources, others with the exception of hydrophobic property substrate (n-alkane) and hydrophilic property substrate (glucose, glycol) were not found to be effective fur biosurfactant production, and 3.0% was better in yield than other concentration of glucose. This yielded C-to-N ratios between 17 and 20. In our experiment, the highest biosurfactant production by P. aeruginosa F722 were observed in 5 days cultivation, containing glucose 3.0%, $NH_4$Cl 0.05%, and yeast extract 0.1% and C-to-N ratio was 20. Optimal pH and temperature for biosurfactant production were 7.0 and $35^{\circ}C$, respectively. Under the optimal culture conditions with glucose, biosurfactant production was amounted to 1.66 g/l. Velocity of biosurfactant production and strain growth increased after nitrogen depletion. The average surface tension of 30 mN/m after the 3 days of incubation under optimal culture condition was measured by ring tensionmeter.

• Journal of Life Science
• /
• v.22 no.2
• /
• pp.239-244
• /
• 2012

The purpose of this paper is to analyze the characteristics and chemical components of biosurfactant produced by Pseudomonas sp. G314. Pseudomonas sp. G314 was isolated from soil samples which were contaminated with oil in Daejon area. As such, it produced quality biosurfactant [23]. One type of biosurfactant was kept in a refrigerator, whereas another type of biosurfactant was kept in room temperature. The surface tension activities were then compared. As a result, the biosurfactant from Pseudomonas sp. G314 that was kept at room temperature was stable for 10 days, showing 26.2 dyne/cm of surface tension activity. This result was found to be similar to that of the refrigerator storage. The surface tension of batch culture was 25 dyne/cm, but the culture in the 5 l fermentor was 27 dyne/cm. Therefore, it can be suggested that the large-scale culture is feasible via the fermentor. Biosurfactant from Pseudomonas sp. G314 was estimated to be a kind of glycolipid because it dissolved in acetone and methanol much better than in benzene and toluene [23]. A spot was detected through the elution of silica gel column and the spread of TLC, and the Rf value was 0.58. This spot has a positive reaction with Bail's reagent and rhodamine 6G. Hence, we can conclude that biosurfactant from Pseudomons sp. G314 was a glycolipid containing carbohydrate and lipid.

• Journal of Applied Biological Chemistry
• /
• v.58 no.1
• /
• pp.81-88
• /
• 2015

To characterize the culture medium for the biosurfactant production by Bacillus pumilus IJ-1, the influences of various carbon, nitrogen and mineral sources were assessed. As a result, the highest biosurfactant production was observed after 96 h cultivation containing 0.5% (w/v) tryptone. The strain was able to grow and produce biosurfactant at 0-10% (w/v) NaCl, in the pH range of 5-10, and at $20-45^{\circ}C$. Optimal culture conditions for the biosurfactant production were at $20^{\circ}C$ and pH 9.0 after 72 h incubation and the surface tension of biosurfactant was 27.0 dyne/cm.

• Journal of Applied Biological Chemistry
• /
• v.54 no.3
• /
• pp.153-158
• /
• 2011

Optimal culture conditions were characterized for production of crude biosurfactant of Bacillus subtilis JK-1. During incubation of B. subtilis JK-1, the bacterial growth pattern, changes of the surface tension at variable temperatures, pH and NaCl concentrations in bacterial culture medium were studied. The strain was able to grow and produce biosurfactant at $15-45^{\circ}C$, in the pH range of 6-10, and at 0-10% (w/v) NaCl. In case, culture broth pH was gradually changed to neutral or weak alkaline. Optimal culture conditions for crude biosurfactant production were at $35^{\circ}C$ and pH 7.0 after 48 h incubation and the surface tension of biosurfactant was 24.0 mN/m. Besides, as the concentration of NaCl was increased from 0 to 10% (w/v), the growth was decreased, pH of the culture broth was converted from weak alkaline to acidic, and the surface tension rised.

• Microbiology and Biotechnology Letters
• /
• v.30 no.2
• /
• pp.167-171
• /
• 2002

The resting cells of Candida sp. SY16 produced a large amount of mannosylerythritol lipid as a biosurfactant when incubated in the distilled water containing only the carbon source. The resting cells exhibited the highest production at 20 g cells per liter on the soybean oil of 75 g/1 as a sole substrate and pH 4∼5 in the shaking culture. Under the optimal conditions, the biosurfactant was extracellularly produced to 58 g/1 after 120 h in jar fermentor, and the yield became higher than that obtained by using the glowing cells of the strain in batch fermentation.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.737-741
• /
• 1999

Phenanthrene degrading bacteria were isolated from the petroleum contaminated soil near an oil tank. Four of 15 strains decreased surface tension of culture broth of phenanthrene-containing minimal media. H6, one of the isolated bacteria decreased surface tension of culture broth below 33 dyne/cm during growth on glucose. H6 was identified as Bacillus subtilis and biosurfactant produced by H6 was lipopeptide. The biosurfactant was produced at 0.13 g/L in the mineral medium containing 2% glucose. Critical micelle concentration(CMC) of the biosurfactant was 52 mg/L. Foaming power was similar to Tween 80 and dispersing power was superior to Tween 80m SDS and Brij30. High thermal stability and emulsion index were also observed.

• Proceedings of the Zoological Society Korea Conference
• /
• 1995.10b
• /
• pp.284.1-284
• /
• 1995