• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.742-750
• /
• 2020

The flow noise generated by hull appendages is directly related to the performance of the sonar in terms of self-noise and induces a secondary noise source through interaction with the propeller and rudder. Thus, the noise in the near field should be analyzed accurately. However, the acoustic analogy method is an indirect method that is not used to simulate the propagation of an acoustic signal directly; therefore, diffraction, reflection, and scattering characteristics cannot be considered, and near-field analysis is limited. In this study, the propagation process of flow noise in water was directly simulated by using the lattice Boltzmann method. The lattice Boltzmann method could be used to analyze flow noise by simulating the collision and streaming processes of molecules, and it is suitable for noise analysis because of its compressibility, low dissipation rate, and low dispersion rate characteristics. The flow noise source was derived using Reynolds-averaged Navier-Stokes equations for the hull appendages, and the propagation process of the flow noise was directly simulated using the lattice Boltzmann method by applying the developed flow-acoustic boundary conditions. The derived results were compared with Ffowcs Williams-Hawkings results and hydrodynamic pressure results based on the receiver location to verify the usefulness of the lattice Boltzmann method within the near-field range in comparison with other techniques.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.12
• /
• pp.2249-2260
• /
• 2017

IMO (International Maritime Organization) has been providing GMDSS (Global Maritime Distress and Safety System) and mandating to install distress and safety systems according to SOLAS. Digital-HF(High-Frequency) coast station communication system maintains interoperability between ship and coast station and digital data exchange in maritime mobile service by digitizing existing analog base voice communication. In this paper, we analyze ITU-R M. 1798-1 established by ITU for digital HF communications and propose Advanced annex2 and new Annex 5 to improve the problems of the existing Annex 2 and Annex 4. The proposed OFDM protocol basically adopts ARQ (Automatic Retransmission Request) which retransmits when an error occurs in a half-duplex manner between an information transmitting side (ISS) and an information receiving side (IRS) and we propose a digital HF communication system and its operational concept which is more reliable and superior than the existing ITU-R M. 1798 by implementing technical development on implementation and performance improvement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.374-380
• /
• 2017

The Internet of Things (IoT) refers to intelligent technologies and services that connect all things to the internet so they can interactively communicate with people, other things, and other systems. The development of the IoT environment accompanies advances in network protocols applicable to more lightweight and intelligent sensors, and lightweight and diverse environments. The development of those elemental technologies is promoting the rapid progress in smart car environments that provide safety features and user convenience. These developments in smart car services will bring a positive effect, but can also lead to a catastrophe for a person's life if security issues with the services are not resolved. Although smart cars have various features with different types of communications functions to control the vehicles under the existing platforms, insecure features and functions may bring various security threats, such as bypassing authentication, malfunctions through illegitimate control of the vehicle via data forgery, and leaking of private information. In this paper, we look at types of smart car services in the IoT, deriving the security threats from smart car services based on various scenarios, suggesting countermeasures against them, and we finally propose a safe smart car application plan.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.569-576
• /
• 1995

Quality changes of canned smoked-oyster in cottonseed oil (SOCO) were investigated to determine an optimal Fo-value ( Fo) for microbiological safety and quality stability during long-term storage. The canned SOCOs were sterilized at $105^{\circ}C,\;110^{\circ}C,\;and\;115^{\circ}C$ with various Fo-values and stored at temperature range of $5^{\circ}C\;-\;50^{\circ}C$. No remarkable quality changes in pin, content of amino nitrogen, arid value and thiobarbituric acid value of the canned SOCOs sterilized at $110^{\circ}C$ with $Fo\geq5.92 min,$ were recognized at all storage temperatures. Same tendency was also recognized in the products sterilized at $105^{\circ}C\;and\;150^{\circ}C$ with $Fo=5,50\pm 0.1 min\;and\;6.50\pm0.1 min,$ while those of the canned SOCOs sterilized at $110^{\circ}C\;with\;Fo<5.92 min$ altered remarkably.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.743-748
• /
• 2019

This study suggested a process of redesigning and implementing problem based learning to enhance students' active and collaborative learning activities and learning outcomes. The results of this study are as follows. First, the ef ect of class participation, academic self-regulated learning, and academic self-efficacy were examined. As a result, first, the average of learning activity, class extension, and participation in class was high in the difference between before and after class. Second, the post average scores of all the factors except the 'evaluation' were higher than before. Third, academic self-efficacy showed a significant difference only in 'task preference'. Finally, students' satisfaction with the class was also high. The professor was also able to grasp the characteristics of individual students by designing and operating the classes using PBL, and it was confirmed that the interaction with students increased. Based on the results of this study, we discussed the limitations and educational implications of the problem based learning class and propose successful problem based learning design and operation of the classroom.

• 한국해양학회지
• /
• v.19 no.2
• /
• pp.153-162
• /
• 1984

This study was conducted to interpret the relations between the polychaete community and its environments in Kwangyang Bay during July, 1982. The type of sediments in the study area varies from sand to clay and the organic content obtained by ignition was in the ranges of 0.3% to 15.4%. The polychaetes which occurred at 25 stations comprised 70 species representing 63 genera and had an average density of 490 animals/m$\^$2/. The most abundant species were Lagis bocki (20%), Lumbrineris longifolia (10%), Chohe teres (7%), and Sternaspis scutata (5%). The polychaete populations show the highest density in muddy sand sediments and have a tendency to decrease their abundance in finer sediments such as bud and clay. The individual numbers of each feeding type show the same tendency. Kwangyang Bay consists of three distinct characteristic communities, representing different physical and biological factors: delta community, muddy flat community and channel community. Delta community has very poor organisms and seems to be determined by physical factors such as tidal current, and by sediment conditions and seems to be determined by physical factors such as tidal current, and by sediment conditions and by the food availability. Muddy flat community shows more diverse and higher abundance than delta community but seems to be impoverished by the stress of oxygen deficiency in sediments. Channel community has the highest density in the study area and comprises more various feeding types. This is probably due to the supply of allochthonous materials from the Seomjin River and offshore as food, the heterogeneous sediments and some biological interactions within habitats.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.408-420
• /
• 2010

On a Mobile Ad hoc NETwork(MANET), it is difficult to detect and prevent misbehaviors nodes existing between end nodes, as communication between remote nodes is made through multiple hop routes due to lack of a fixed networked structure. Therefore, to maintain MANET's performance and security, a technique to identify misbehaving middle nodes and nodes that are compromise by such nodes is required. However, previously proposed techniques assumed that nodes comprising MANET are in a friendly and cooperative relationship, and suggested only methods to identify misbehaving nodes. When these methods are applied to a larger-scale MANET, large overhead is induced. As such, this paper suggests a system model called Secure Cluster-based MANET(SecCBM) to provide secure communication between components aperANET and to ensure eed. As such, this pand managems suapemisbehavior nodes. SecCBM consists apetwo stages. The first is the preventis pstage, whereemisbehavior nodes are identified when rANET is comprised by using a cluster-based hierarchical control structure through dynamic authentication. The second is the post-preventis pstage, whereemisbehavior nodes created during the course apecommunication amongst nodes comprising the network are dh, thed by using FC and MN tables. Through this, MANET's communication safety and efficiency were improved and the proposed method was confirmed to be suitable for MANET through simulation performance evaluation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.267-274
• /
• 2018

A variety of appendages are attached to coastal and offshore fishing boats to improve stability during navigation or fishing operations (stability performance and roll reduction). These appendages are generally classified into three types, which are shown in Fig. 1. The numerical calculations were conducted for the following eight cases: one case of a bare hull, three cases where a single appendage attached, three cases of a pair of appendages attached, and one case where all three appendages were attached. Table 1 presents the main dimensions of the bare hull and Table 2 describes the main dimensions of the three appendages. The fluid dynamic performance with regard to the three hull appendages was evaluated via CFD for the following cases: each of the appendages attached independently, a pair of appendages attached, and all three appendages attached simultaneously. The No. 1 appendage showed that pressure resistance was proportionally greater than friction resistances. Both Nos. 2 and 3 appendages showed comparable levels of pressure and friction resistances. The correlation between appendages was minimal in the case of pairs and Comparing the cases of the No. 2 appendage attached and all appendages attached, at 11 kn, the EHP showed an difference of 9 %.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.15-20
• /
• 2007

In this study, the authors investigated the change of marine environment by dumping dredged materials generated by construction of Busan New Port. There are lots of possibilities to impact an ocean ecosystem by toxic materials in the dredged material dumped in the open seas. As a result of analysis of environmental monitoring in the study areas 12 times a year, COD is II grade, T-N is I grade, T-P is between II and III grade. This result is same as another results of offshore in Korea. It seems unclear that it results from the change of water quality by dumping dredged material. However, according to the result of this investigation, it is not effected extensively to the marine environment by dumping dredged materials. We need further environmental monitoring in the interest sea areas, also need to keep on investigating the impact on the marine ecosystem by dumping dredged materials.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.91-96
• /
• 2007

Lab scale experimental study was carried out for SBR process, to investigate the effects of influent ship sewage organic compound removal and Bacillus sp. state on design parameters. This process was able to remove nitrogen and phosphorus as well as organic matter efficiently. More than 95% of chemical oxygen demand(COD) were removed. In addition, about 97% of total nitrogen (T-N) was reduced. The total phosphorus(T-P) reduction averaged 93%. The performance load of SBR process was shown to be $0.095kg{\cdot}TOC/m^3{\cdot}day$. The pH was decreased from 8.1 to 7.0 within 30 min and increased to 7.3 at the end of anoxic stage, and these phenomena were explained. The sludge produced in the SBR process is characterized by low generation rate (about $0.36kg{\cdot}MLSS/kg{\cdot}TOC$) and excellent settleability. The number of Bacillus sp. in the SBR was 24.2%, indicating that Bacillus sp. was a predominant species in the reactor.