• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1093-1101
• /
• 2007

This study presents the design improvement process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of $6{\times}6$ array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9C
• /
• pp.589-595
• /
• 2011

This paper proposes an improved multi-stage timing offset estimation scheme for orthogonal frequency division multiplexing (OFDM) systems in multipath fading channel environment. The conventional multi-stage timing offset estimation scheme is very sensitive to the random multipath components. By exploiting the sample standard deviation of the cross-correlation values, the proposed scheme achieves a robustness to the random multipath components. Simulation results demonstrate that the proposed scheme has a higher correct estimation probability and has a better mean square error (MSE) performance than the conventional scheme in multipath fading channels.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.11
• /
• pp.1089-1096
• /
• 2010

The relation between the vibration induced from machinery and the radiated sound is complicated. Acoustic intensity method is widely used to obtain the accuracy of noise measurement and noise identification. In this study, as groundwork, the complex acoustic intensity method is performed to identify noise source and transmission path on different free space point source fields. As an industrial application, the complex acoustic intensity method is applied to HVAC to identify sound radiation characteristics in the near field. Experimental complex acoustic intensity method was applied to HVAC, it is possible to identify noise sources in complicated sound field characteristics which noise sources are related with each other, and certificate the validity of complex acoustic intensity. Especially, it can be seen that complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for identification of noise. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.107-114
• /
• 2002

The problem of blind signal separation of independent sources consist in retrieving the source from the observation of unknown mixtures of unknown sources. In this paper, we propose a technique for blind signal separation that can extract original signals from their non-stationary mixtures observed in a ordinary room. The proposed method implements blind signal separation by minimizing a non-negative cost function that achieves the minimum when the second-order cross-correlation value of the observed signals becomes zero. The validity of the proposed method has been verified by a computer simulation and experiment that extracts two source signals from their mixtures observed in a normal room.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.5
• /
• pp.145-154
• /
• 1996

Polymer-modified mortars have an excellent water proofness and water retentivity. Therefore, the study on the moisture diffusion behavior- is very important. The purpose of' this study is to investigate the effects of relative humidity and moisture content in mortars on the moisture diffusion, and the relationship between the shrinkage and moisture diffusion coefficient of polymer-modified mortars cured at $20{\circ}C$ 50% R.H and 80% R.H. The pore size distribution of the polymer-modified mortars was also measured. From the test results, the relative humidity and moisture content in mortars influenced on the moisture diffusion of polymer-modified mortars. The shrinkage and moisture diffusion coefficient of polymer-modified mortars cured at $20{\circ}C$ 50% R.H. was bigger than that cured at $20{\circ}C$ 80% R.H.. and decreased with increasing polymer-cement ratio regardless of polymer type.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.311-311
• /
• 2020

가뭄·홍수 등 수재해 대응대책 수립 측면에서 유역의 자연유출량 산정은 가장 핵심적인 사항이라 할 수 있다. 우리나라는 전국적으로 수위-유량관측소를 설치하여 실시간 유출량 모니터링을 통해 수문정보를 수집하며, 주요지점을 제외한 유역에서는 주기적으로 강우-유출모형의 매개변수 최적화를 통해 산정된 장기유출량 결과를 자연유출으로 가정하여 수자원 계획 수립시 활용하고 있다. 그러나 강우-유출모형의 최적 매개변수 추정을 위해 활용되는 관측 수문자료는 상대적으로 자료의 연한이 짧고, 계절·공간적인 특성으로 인해 매우 제한적이며, 유역의 특성을 충분히 고려하지 못해 미계측유역의 매개변수 추정시 모형의 자료에서 기인한 불확실성이 크게 발생한다는 단점이 있다. 이에 본 연구에서는 관측자료에 대한 신뢰성이 유의하며, 공간적으로 고르게 분포된 12개 댐 유역을 대상으로 매개변수 지역화 연구를 수행하였다. SCEM-UA기법을 통해 GR4J 강우-유출모형의 매개변수를 최적화 하였으며, 매개변수와의 상관관계 및 선형회귀분석을 통해 유역특성인자를 선별하여 Copula 함수를 통해 지역화된 매개변수를 추정하였다. 최종적으로 본 연구에서 제시된 방법론에 대한 적합성을 평가하기 위하여 매개변수 최적화가 수행된 유역을 미계측 유역으로 가정하여 교차검증 관점에서 적합성을 검토하였으며, 통계적으로 유의한 결과가 도출되는 것을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5A
• /
• pp.641-647
• /
• 2008

This paper introduces a new technique that can extract natural frequencies and damping ratios from output-only vibration data. Firstly, the free vibration data is obtained from the cross correlations of the output-only response data using a singular value decomposition process. Secondly, the well-known system identification algorithm is applied to extract the natural frequencies and damping ratios from the extracted free vibration data. Comparing to ERADC technique, the accuracy of the proposed modal parameter identification algorithm has been numerically examined. Furthermore, the practicability of the proposed algorithm has been examined through the output-only acceleration data collected from the Seohae cable-stayed bridge. Using the proposed technique, total 24 modes have been identified for the deck plate motions of the bridge.

• Science of Emotion and Sensibility
• /
• v.7 no.3
• /
• pp.15-25
• /
• 2004

The regression analysis and Adaptive -Network based Fuzzy-inference system (ANFIS) were applied to the explanation on human's visual texture of cotton fabrics with 7 mechanical properties. The ANFIS uses the structure with fuzzy membership function and neural network. The results obtained by the statistical analysis through the coefficient of correlation and regression analysis showed that subjective texture had a linear relationship with mechanical properties. But It had a relatively low coefficient of determination and was difficult that the statistical analysis explained other relationship with the exception of a lineality and interaction among mechanical properties. Comparing the statistical analysis, the ANFIS was an effective tool to explain human's non-linear perceptions and their interactions. But to apply ANFIS to human's perceptions more effectively, it is necessary to discriminate effective input variables through controlling the properties of samples.

• Journal for History of Mathematics
• /
• v.25 no.4
• /
• pp.37-51
• /
• 2012

By comparing the development history of rectangular coordinate system in Cartography and Mathematics, we assert in this manuscript that the rectangular coordinate system is not so much related to analytic geometry but comes from the space perceiving ability inherent in human beings. We arrived at this conclusion by the followings: First, although the Cartography have much influenced to various area of Mathematics such as trigonometry, logarithm, Geometry, Calculus, Statistics, and so on, which were developed or progressed around the advent of analytic geometry, the mathematical coordinate system itself had not been completely developed in using the origin or negative axis until 100 years and more had passed since Descartes' publication. Second, almost mathematicians who contributed to the invention of rectangular coordinate system had not focused their studying on rectangular coordinate system instead they used it freely on solving mathematical problem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.293-293
• /
• 2021

자연유량이란 인위적 행위에 의한 하천의 유량 변화가 없는 개발되지 않은 상태의 하천유량을 말하며, 실제 유량을 측정하거나 관측자료를 활용한 장기유출모형을 통해 산정할 수 있다. 미계측 유역에 대한 강우-유출 모형 구축시, 무엇보다 실제 미계측유역에 적용시 나타날 수 있는 문제점을 최소화할 수 있는 방향으로 모형 개발이 이루어지는 것이 필요하다. 강우-유출 모형 매개변수의 수가 많아질수록 과적합(over-fitting)의 발생 소지가 증가하게 되며, 지역화 모형 구축시 불확실성을 더욱 가중시키게 된다. 이러한 이유로, 모형의 검정보다는 검증에 초점이 맞춰져 있어야 하며, 더불어 사용되는 강우-유출 모형의 매개변수가 적어야 한다. 본 연구에서는 대표 강우-유출모형의 선정시 여러 평가 기준 중 예측의 정확성 측면에서 통계적 지표를 통해 모형의 수행능력에 중점을 두었으며, 적은 개수의 매개변수를 갖음에도 불구하고 상대적 우수한 모의결과를 제공하는 GR4J(Ge'nie Rural a 4 parame tres Journalier)모형을 최적 유출모형으로 선정하여 댐 상류유역에 대한 자연유량 재현성능을 평가하였다. 최종적으로 강우-유출모형의 최적매개변수와 유역특성인자 사이의 상호연관성을 고려해 매개변수를 지역화하기 위하여, 본 연구에서는 두 가지 이상의 변량에 대한 상관성을 효과적으로 재현하는데 효과적이며, 자유로운 주변확률분포 선택과 결합확률분포의 추정이 용이한 장점이 있는 Copula 함수를 활용하였다. 제시된 방법론에 대한 적합성을 평가하기 위해 교차검증 관점에서 지역화된 매개변수의 적합성을 검토하였으며, 본 연구에서 도출된 결과는 유역특성에 따른 미계측유역의 자연유량 산정시 지역 매개변수를 강우-유출모형에 활용함으로써 신뢰성 있는 자연유량 산정 결과를 제공할 수 있을 것으로 판단된다.