• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.9-12
• /
• 2006

We performed molecular dynamics simulations on the conventional MOF, IRMOF-14 and the catenated MOF with two MOF chains, IRMOF13, to find out rational design and synthetic strategies toward efficient hydrogen storage materials. The molecular dynamics calculations were done using Universal force fields and the analysis of result was performed during the NVE dynamics after preliminary NVT dynamics at 77K. The results showed the density of adsorbed hydrogen molecules was increased in the various pores created by catenation of MOFs while the large amount of volume in conventional MOF was not effectively utilized to store hydrogen. Those calculation results commonly showed the proper control of pore si Be for hydrogen storage into MOF by catenation would be one of the efficient ways to increase hydrogen capacity of MOFs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.288-288
• /
• 2022

행정안전부는 뉴딜사업 일환으로 인명피해 우려가 높은 산악지역 및 마을 상류부에 위치한 재해위험지구, 급경사지 및 노후저수지 등에 대해 위기상황에 신속·정확하게 작동하는 조기경보시스템 구축 사업을 진행 중이다. 특히 재난발생 시, 인명피해에 가장 민감한 조기경보발령에 대해서는 지역적 수리·수문특성을 고려한 단계별 위험요소(강우량, 수위, 조위 등)를 정량화하여 위험지역 내 주민들이 적절한 대응을 할 수 있도록 조기경보 기준을 정립하는 것이 필요하다. 본 연구에서는 충청남도 보령시를 관통하는 대천천 유역에서 집중호우가 발생할 경우 침수피해 발생 가능성이 높은 대천천 하상주차장 구간을 중심으로 상류의 청천저수지에서 방류하는 홍수량과 하류의 서해 조위가 대천천 본류의 하상주차장에 미치는 영향을 수리학적 모형을 이용하여 분석하고자 하였다.

• Geotechnical Engineering
• /
• v.7 no.2
• /
• pp.51-66
• /
• 1991

In the stability analysis of hillside slopes, the roots of vegetation have been considered to act as a soil reinforcement. In order to predict the amount of increase in soil shear resistance, produced by tensile strength of roots that intersect a potential slip surface in hillside slopes, new soil -root interaction models are proposed in this paper. For this purpose, firstly, laboratary teats and in-situ tests wert performed on soil-root systems, and experimental results were compared with a couple of soil-root interaction models which had been proposed by Gray, Waldron, and Wu etc. Based on this comparison, a new soil-root interaction model is proposed. Secondly, a probabilistic soil-root model is proposed based on statistical analysis considering random nature of root distribution, root characteristics, and soil-root interactions. Finally, to examine the effect of this root reinforcement system on stability of hillside slopes, a simple three-dimensional stability analysis was performed, and it was shown that root reinforcement had a significant stabilizing influence on shallow slips rather than deep slips in hillside slopes.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.4
• /
• pp.32-41
• /
• 2004

Analysis of water-level fluctuation due to goundwater-surface water interaction in coastal aquifers is carried out by numerical modeling. The conceptual model used in this study has a stream boundary and a tidal boundary that forms a right angle and the stream partially penetrates the aquifer. We analyzed the effect of each boundary and the simultaneous effect of the two boundary conditions. The area of influence caused by the stream boundary increased during the simulation, while the influence zone of the coastal boundary was relatively constant. The groundwater level near the zone where two boundaries meet may rise by the action of combined effect of the two boundaries or may not change by cancelling the effect of each boundary. Thereafter, care must be taken when hydraulic parameters are estimated using sinusoidal oscillations of hydraulic head in coastal aquifers. Sensitivity analysis is employed to develop insight into the controls on groundwater level fluctuations. In this study our analyses focused on the effect of conductance and the stream width to the aquifer nearby.

• Composites Research
• /
• v.18 no.6
• /
• pp.34-39
• /
• 2005

In this study, we analyzed the relation between physical/mechanical properties and ballistic properties for several engineering ceramics that were expected to use as armor material. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles. Increasing Young's modulus/density, hardness/density and flexural strength/density ratios, ballistic properties were generally increased. Especially it appeared that the ballistic property about KE projectile was lineally increased, as HEL/density ratio increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.4
• /
• pp.17-24
• /
• 2006

Hydrodynamic ram of aircraft fuel tanks is one of main ballistic battle damages of an aircraft and has great importance to airframe survivability design. Basic concept, physics and research history of hydrodynamic ram are investigated. The penetration and internal detonation of a simple fuel tank and ICW(Intermediate Complexity Wing) are analyzed by computational method. Structural rupture and fluid burst are analytically realized using general coupling and coupling surface interaction. The results such as fluid pressure, tank stress and displacement are shown and future research chances are suggested based on the study.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.110-117
• /
• 2017

Multiscale Simulation은 sub-nano scale의 전자 구조에서부터 macro scale의 multibody system에 이르기까지 다양한 시간/공간 스케일을 관통하는 시뮬레이션 기법이다. 즉, 전자수준에서의 변화로 인한 분자 전체의 구조 변화와 그에 따른 기능의 변화를 알 수 있는 simulation 방법으로 다양한 스케일에서 분자의 정보를 얻을 수 있다는 점에서 최근 중요하게 여겨지는 시뮬레이션 방법 중 하나이다. 따라서 본 연구에서는 몇 가지의 EDISON_CHEM 솔버들을 조합하여 Multiscale Simulation의 가능성을 제시하고자 한다. 또한, 세부적으로 양자계산 시에 어떤 이론을 선택하여 계산하면 더 정확한지, basis set 선택 시 발생하는 basis set superposition error(BSSE)로 인한 분자 수준의 물성의 오차는 어느정도 인지 알아보고자 했다. 본 연구에서는 비교적 간단하지만 온실 가스이자 에너지원으로 각광받고 있는 메탄을 대상으로 하였다. 다양한 시공간 스케일을 다루는 에디슨 솔버들 중에 양자 수준의 계산을 할 수 있는 솔버로는 "GAMESS"를 이용했고, 이 결과를 통해 분자 수준의 물성을 알아보기 위한 솔버로는 "사용자 지정 역장을 사용한 일반 분자동력학(general_MD)"과 "두가지 서로 다른 종류의 LJ입자에 대한 분자동력 시뮬레이션 프로그램(sejong_lj))"을 이용했다. 메탄의 상 전이 과정에 대한 연구 결과 Hartree fock (HF) self-consistent theory를 통해 얻은 force field 보다는 Second-order Møller-Plesset (MP2) perturbation theory로 얻은 force field가 더 정확한 상 전이 온도를 예측한다는 것을 메탄의 coarse-grained simulation을 통해 알 수 있었다. 또한, MP2 이론으로 구한 force field에서 BSSE를 보정해주면 실험적으로 구한 메탄의 상 전이 온도와 더 근사한 값의 시뮬레이션 결과를 얻을 수 있었다. 이를 통해 전자 간의 상호작용을 더 정교하게 계산하는 MP2 이론으로 force field를 구해서 BSSE를 보정해주면 계산의 결과가 정확해진다는 것을 알 수 있었으며 이것이 EDISON_CHEM의 솔버들로 가능하다는 것을 제시하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.1
• /
• pp.58-63
• /
• 2011

This paper presents a development of a fire control system with an intelligent judgment algorithm of hit or not. The presented algorithm analyzes an impact energy and impact signals according to impact materials. And the detected signals are used to judge the correct hit or not. Furthermore, Zigbee wireless communication technology is applied in the developed fire control system. The wireless communication technology can supply a simple installation of the practical system and free from ageing of communication wire. The presented system is verified in the practical fire test, and the results show the effectiveness of the development system.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.3
• /
• pp.47-52
• /
• 2008

This investigation was performed in order to study the properties of deposition and layers by Silicon Dioxide, SiO2, as dielectric onto Via and Trench which have high Aspect Ratio (AR). Thus, in order to confirm these properties, three types of CVD, which were PECVD, PETEOS, and ALD, were selected. On the experiment each of the property sections was estimated that step overage of PECVD: <30%, PETEOS: 45%, ALD: 75% and the RSM of PECVD: 27.8 nm, PETEOS: 2.1 nm, ALD: <2.0 nm. As a result of this experiment for the property of electric film, ALD was valuated to be the most favorable outcome. However, ALD was valuated to have the least quality for the deposition rate. ALD deposition rate, $10\;\AA/min$ by $1\;\AA$/1cycle, was prominently lower than PETEOS, which had the deposition rate of $5000\;\AA$/min. Since electric film requires at least $1000\;\AA$ thicknesses, ALD was not suitable for the deposition rate. which is the most important component in a practical use. Therefore, in this particular study, PETEOS was evaluated to be the most suitable recipe.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.