• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.699-705
• /
• 2016

Although it has been well known that the Saemaul Undong had a direct relation with the water resources development during 1970's, its contribution to the water resources and increased income in rural communities has not been thoroughly quantified so far. In order to assess the contribution of the Saemaul Undong in terms of rural water resources development, we investigated various historical data produced by the central and local governments in relation to water resources development. The results show the direct and indirect contribution of the Saemaul Undong to the water resources development in rural communities such as sewage works, water supply facilities, shared wells, and river works. The results also showed a positive relation between per-house income in rural communities and areas of irrigated paddies, which were rapidly increased during 1970's. These results can be utilized to transplant the positive aspect of the Saemaul Undong to developing countries focusing on water resources development in rural areas.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2019

The optimal design parameters of a dynamic absorber (DA) in a machine body (that is considered as a rigid body) are discussed in this paper. The bounce and rotation motions of the rigid body have been controlled passively by a DA, which consists of a mass and a spring. The rigid body is subjected to a harmonically excited force and supported by linear springs at both ends. To define the motion of a rigid body with a DA, the equation of motion was expressed in the third-order matrix form. To define the optimal design conditions of a DA, the reduction of dynamic characteristics, represented by the amplitudes of bounce and rotation, and the transmitted powers, were evaluated and discussed. The level of reduction was found to be highly dependent on the location and spring stiffness of the DA.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.117-120
• /
• 2009

본 연구는 손동작을 하였을 때 집중력이 EEG 코히런스(coherence)에 미치는 영향을 분석하였다. 신체에 이상이 없는 대학생 8 명이 시각 자극으로 제시되는 운동 작업을 지시하는 실험에 참여하였다. 실험 중 실시간으로 오른손의 요측 수굴근에 센서를 부착하여 EMG 를 측정하였고 국제 10-20 측정법에 의거한 C3 지점과 상하좌우로 2.5cm 떨어진 지점에 5 개의 전극을 부착하여 EEG 를 측정하였다. 운동영역간의 또는 운동영역과 비운동영역 사이의 코히런스 분석을 통하여 동작과 휴식을 구분해 주는 유의한 결과를 확인할 수 있었으나 개인에 따른 차이를 보였다. 유의한 차이를 보이는 코히런스 채널 쌍의 개수에 의해 강한 코히런스와 약한 코히런스로 그룹화 할 수 있었다. 개인별로 차이가 있는 EEG 코히런스의 결과는 동작시의 채널 별 EEG 의 상대적 출현량의 결과와 동일한 패턴을 가진 것으로 확인되어 주의력에 의한 영향임을 알 수 있었다.

• The Journal of Korea Robotics Society
• /
• v.2 no.3
• /
• pp.249-254
• /
• 2007

본 논문에서는 웨이퍼 레벨 밀봉 실장된 수직 운동 가속도 신호를 감지할 수 있는 초소형 Z축 가속도 센싱 엘리먼트를 제작하였다. 초소형 Z축 가속도 센싱 엘리먼트는 수직 방향의 정전용량 변화를 필요로 하기 때문에 단일 기판상에 수직 단차의 형성을 가능케 하는 확장된 희생 몸체 미세 가공 기술 (Extended Sacrificial Bulk Micromachining, ESBM) 을 이용하여 제작되었다. 확장된 희생 몸체 미세 가공 기술을 이용하면 정렬오차가 없이 상하부 양쪽에 수직 단차를 갖는 실리콘 구조물의 제작이 가능하다. 또한, MEMS 센싱 엘리먼트의 부유된 실리콘 구조물을 보호하기 위하여 웨이퍼 레벨 밀봉 실장 기술이 적용하여 고신뢰성, 고수율, 고성능의 Z축 가속도 센서를 제작하였다. 신호 처리 회로와 가속도 센서를 결합하여 Z축 가속도 센싱 시스템을 제작하였고 운동가속도 범위 10 g 이상, 정지 드리프트 17.3 mg 그리고 대역폭 60 Hz 이상의 성능을 나타내었다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.399-415
• /
• 1999

임플랜트 보철 환자의 하악 운동에 관한 연구를 위해 완전 고정성 보철 치료를 한 8명의 환자와 상하악 총의치를 장착한 8명의 환자, 그리고 5명의 자연치아 피검자를 대상으로 Sirognathograph(Siemens, Benshiem, Germany)와 BioPAK program(BioResearch, Milwaukee, U.S.A.)으로 한계운동과 당근시편에 대한 편측 저작운동에 대한 검사를 시행하였다. 편측 저작 운동은 전두면에서의 저작운동의 높이와 폭, 전두면에서의 저작각도, 시상면에서의 절치기준점의 최대 이동거리, 시상면에서의 저작운동의 전후방 이동거리, 최대개구속도, 최대폐구속도의 기준점으로 각 저작주기의 성적을 평균처리 하여 다음과 같은 결론을 얻었다. 1. 전두면에서의 저작운동의 높이는 자연치, 총의치, 임플랜트 군간에 유의성있는 차이가 없었다(p>0.05). 2. 전두면에서의 저작운동의 폭은 임플랜트 군이 자연치, 총의치 군에 비해 유의성있게 작은 수치를 보였다(p<0.05). 3. 전두면에서의 저작각도 분석시 임플랜트 군과 자연치 군, 임플랜트 군과 총의치 군간에 유의성있는 차이가 없었다(p>0.05). 4. 시상면에서의 절치기준점의 최대 이동거리 분석시 임플랜트 군과 자연치 군, 임플랜트 군과 총의치군간에 유의성 있는 차이가 없었다(p>0.05). 5. 시상면에서의 전후방이동거리는 자연치 군이 임플랜트 군, 총의치 군에 비해 유의성 있게 크게 나타났다(p<0.05). 6. 최대개구속도는 자연치 군이 총의치 군과 임플랜트 군에 비해 유의성 있게 작은 수치를 보였다(p<0.05). 7. 최대폐구속도는 각 군간에 유의성 있는 차이가 없었다(p>0.05). 8. 저작운동은 개인간의 차이가 커서 명확한 결론을 유추하기가 어려웠다.

• Journal of Navigation and Port Research
• /
• v.38 no.2
• /
• pp.97-103
• /
• 2014

In these days, the world has been increasing navy forces such as aircraft carriers and high-tech destroyers etc. and the importance of submarines is being emphasized. Therefore, accurate values of the derivatives in equations of motion are required to control motion of the submarines. Hydrodynamic derivatives were measured by the vertical planar motion mechanism(VPMM) model test. VPMM equipment gave pure heave and pitch motion respectively to the submarine model and the forces and moments were acquired by load cells. As a result, the hydrodynamic derivatives of the submarine are provided through the Fourier analysis of the forces and moments in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.961-967
• /
• 2007

Automatic water feeding system for chickens is the one of the most important devices at poultry farms. Chickens drink water directly from a water feeder nipple of the automatic water feeder. Check valve inside the water feeder nipple is open when they drink water and is closed otherwise. There are two types of nipples. One is the piston nipple, and the other is the ball nipple. Because the nipple stick in the ball nipple can move freely, the sloping mechanism of the ball nipple works well. but it has complicated mechanism. On the other hand, the piston nipple has very simple structure, but its movement is limited so it can move only up-and-down. To overcome those limitation, the piston nipple with sphere valve seat face (sphere face piston nipple) has been developed and is just distributed at domestic markets. The experimental performance test of the commercialized sphere piston nipple has been conducted, and compared with the performance of the ball nipple and the piston nipple which are domestic products. As the result, sphere piston nipple shows excellent performance compared to that of the piston nipple but its performance is similar to ball type nipple.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.131-138
• /
• 2019

This study focused on the roll motion characteristics of a two-dimensional (2D) rectangular floating structure under regular beam sea conditions. An experiment was conducted in a 2D wave tank for a roll free decay test in calm water and the roll motion in a range of regular waves with and without heave motion to investigate the motion response and heave influence on the roll motion. A numerical study was carried out using Reynolds-averaged Navier Stokes (RANS)-based CFD simulations. A grid convergence test was conducted to accurately capture the wave condition on the free surface based on the overset mesh and wave forcing method. It was found in the roll free decay test that the numerical results agreed well with the experimental results for the natural roll period and roll damping coefficient. It was also observed that the heave motion had an impact on the roll motion, and the responses of the heave and roll motion from the CFD simulations were in reasonable agreement with those from the experiment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.43-50
• /
• 2001

In order to analyze the dynamic motions of fish cage systems made of a frame and a netting under the conditions of waves and current, the hydraulic model experiment at towing tank and the numerical computation using boundary integral element method based on linear potential theory were carried out on a square and a circular type of fish cage, The computed and measured results for the dynamic motions of model fish cage systems showed that the heave and pitch motions were almost unaffected by the inclusion of nets, while the surge motions were very reduced by drag force acting on them. In addition, irregular wave-induced motions of fish cages included non-negligible 2nd order harmonic components at high frequency nearly twice the wave frequency. The reason why these motions were considered was due to resonance or structural components of frames being overflown and out of water during a wave cycle. It was found that circular type was more desirable structure in the open sea than square one only in the respect of dynamic motions due to waves and current. Further verifications were needed considering hydrodynamic forces, fatigue life, and structure analysis based on long term stochastic waves including frequency and time domain for the purpose of analyzing and designing fish cage systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1122-1127
• /
• 2001

This paper proposed a speed adaptive control system with load torque observer and feed-forward compensation using neural network for air compressor system driven an induction motor. The motor receive impact load change under the influence of piston movement of up and down, and so it difficult to obtain good speed control characteristics. With real-time adjusting control gain estimated in neural network, control characteristics of motor is improved. The validity of the proposed system is confirmed through the theoretical analysis and computer simulation.