• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.9-11
• /
• 2018

선박의 파랑 중 조종성능 변화를 추정하기 위하여 선박해양플랜트연구소 공학수조에서 KCS 선형의 모형선으로 파랑 중 자유항주모형시험을 수행하였다. 파향, 파고, 파장 등이 변화는 규칙파 상태에서 KCS 선형의 35도 선회시험을 수행하여 파 중 선회궤적변화를 관찰하였고, 정상선회 상태에서 속도기반 궤적밀림 지수를 계산하였다. 계산된 속도기반 궤적지수를 정수 중 초기선회 상태에 외력으로 작용하여 그 시뮬레이션 결과를 보정하고 이를 파랑 중 초기선회 성능과 비교분석하였다. 그 결과 초기 선회 중 도출되는 선회성능인 전진거리, 전술선회직경은 선수파일 경우, 모형선의 전진방향 속도 변화를 추가적으로 고려해야함을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2538-2539
• /
• 2000

송배전 system에서 모선관리 및 운용에 있어 초고압 차단기는 매우 중요한 역할을 담당하고 있다. 선로의 운전상태와 차단기의 투입 상황 인식 및 확인은 필수요건이다. 이러한 차단기의 운전상태를 전자적인 신호성분을 검지하여 비접촉식 개폐 확인 unit가 필수적으로 대두되고 있다. 이 unit는 고신뢰성, 고안정성을 요구하며 정확한 표시가 필요하다. 송배전의 모든 System에 적용 가능하며 적용시 선로와 차단기의 운전 및 보수에 절대적인 안정성을 제공한다.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.103-109
• /
• 1998

디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.86-93
• /
• 1999

It is necessary to calculate the system's factor for reasonable operation and security enhancerrent of large scale distribution system This paper presents an effective three phase load flow calculation for distribution system unbalance evaluation. It takes into account an untranspoed transmission line, the core loss as a functioo of voltage on the serondary side of the transformer, and a generator unbalance mxle1 which is also suitable for a salient pole machine. The load flow algorithm is used Newton-RaiDson method of load flow equations in bus phase voltage.oltage.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.107-115
• /
• 1999

In order to develop a convenient method for the estimation of transport distance of settling stones in quiescent water or flowing water, introduced was the simple but relatively accurate equation of drag coefficient. The equation of drag coefficient introduced was confirmed to give relatively accurate evaluation for the drag force of smooth-surface sphere, and the effects of surface roughness and shape can be considered by adjusting empirical parameters. A theoretical equation has been developed for the settling velocity or settling distance of smooth-surface sphere in quiescent fluid, and the computation results have been obtained by adjusting the empirical parameter for the settling distance of stone in quiescent water. The 2nd order ordinary differential equation has been developed for the case of settling stones in flowing fluid, and a numerical model has been developed by using Runge-Kutta method for its solution. A number of cases have been tested by adjusting the empirical parameter.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.345-346
• /
• 2010

본 연구에서는 모형실험 및 수치계산에 의해 정수중 부선 주위의 유통해석을 실시하였으며, 이를 통하여 객관적이고 정량적으로 부선의 저항추진 성능을 파악할 수 있었다. 먼저 희류수조에서 모형실험을 실시한 후, 실험에서 얻어진 데이터와의 비교를 통한 CFD의 유효성을 검증하고, 다른 형태의 예부선 선박 주위의 유동장 계산에 적용시켜 해결할 수 있는 가능성을 확인 하였다. 부선의 선수 형상에 의하여 저속일 때 25% 정도의 저항이 차이나는 현상을 모형실험을 통하여 파악할 수 있었으며, 유효마력은 7kts부터 급격히 증가하므로 적재상태별 경제적인 운항속력을 선정하여 효율적인 예부선 업무를 수행해야 할 것으로 판단된다.

• Korean journal of food and cookery science
• /
• v.25 no.3
• /
• pp.365-378
• /
• 2009

This study performed microbiological hazards analysis in raw food materials, cooking processes, kitchen staff, utensils, and the environment in order to obtain contamination levels of S. aureus in school foodservice operations. S. aureus was not detected in cooked foods offered by the foodservice operations; however, it was found in raw food materials prior to cooking. In the case of vegetables, S. aureus was detected in washed mung bean sprouts, parboiled mung bean sprouts, and bellflower roots both before and after disinfection, at levels of 2.2, 1.0, 1.0, and 1.0 log CFU/g, respectively. For processed foods, S. aureus was detected in one sample of packaged bean curd as well as in mung bean jelly cake at the level of 1.5 log CFU/g. For meat products, S. aureus was detected in beef brisket and chicken at levels of 2.3 and 1.3 log CFU/g, respectively. To determine microbiological hazard data for the hands and gloves of cooking personnel, the staff members were divided into two groups: a group presenting Enterobacteriaceae or coliforms, and another group presenting neither Enterobacteriaceae nor coliforms. The results showed that S. aureus was detected on the hands of staff in each group at levels of 2.0 and 2.1 log CFU/hand, respectively, and at 1.8 and 0.0 log CFU/hand on the gloves of staff in each group, respectively. Among kitchen utensils, as an environmental factor in school foodservice operations, S. aureus was detected on meat knives, mixing bowls, and dish cloths at levels exceeding 1.0 log CFU/hand.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.699-705
• /
• 2007

In this study, the improvement of the operation condition and the water quality in water treatment plant by operating information system(OIS) was evaluated for Ansan water treatment plant. The average flow rate of raw water in the year 2005(after constructing the OIS) appeared 15.6 % lower than that in the year 2004(before constructing the OIS). The mean value(12.37 NTU) of raw water turbidity in the year 2005 remained constant, or nearly so with that(12.06 NTU) in the year 2004. The average dosing rates of coagulant appeared 12.06 mg/L in the year 2005 which was higher than 10.31 mg/L in the year 2004. Furthermore, the average turbidity concentration of fresh water in the year 2005 appcared slightly better than that in the year 2004. From $COD_{Mn}$ and BOD concentration of raw water, the water quality in the year 2005 were better than those in the year 2004. The average concentration of $KMnO_4$ in the year 2004 and the year 2005 was 2.95 mg/L and 1.25 mg/L, respectively, and the average concentration of THMs in the year 2004 and the year 2005 appeared 0.038 mg/L and 0.025 mg/L, respectively. Therefore, the fresh water quality in the year 2005 was better than that in the year 2004. In this study, it is considered that the operation of Ansan water treatment plant may be optimized by OIS, and thus the OIS may be very useful method to improve the water quality.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.182-193
• /
• 2000

Molar cyclization equilibrium constant (K$_{x}$) of poly(alkylene terephthalate) (PAT) cyclics was calculated by the Monte Carlo simulation on the basis of rotational isomeric state (RIS) model. The experimental $K_{x}$ of PAT cyclics, which was not clearly explained by the Jacobson-Stockmayer theory and the method of Flory, Suter, and Mutter however, was explained well by the direct computational method with the reaction radius ${\gamma}$=0.5 < ${\gamma}^{2}$> $^{1/2}$. The effect of PAT conformation on $K_{x}$ of PAT cyclics was investigated by changing its statistical weight parameters, ${\sigma}_{1}$ and ${\sigma}_{2}{\cdot}K_{x}$ of PAT cyclics obtained by the direct computation method with various radii and the radius ${\gamma}$=0.5 < ${\gamma}^{2}$> $^{1/2}$ was slightly changed with ${\sigma}_{1}$ and ${\sigma}_{2}$. Consequently, it was concluded that $K_{x}$ of PAT cyclics is strongly dependent on the configuration of each PAT and affected by the change of its conformation to some extent.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.305-318
• /
• 2021

The aim of the research is providing the rheological performance range for manufacturing "mid-workability concrete". The mid-workability concrete means the normal strength range concrete mixture with high workability. Since there is not enough study or quantitative definitions on performance of the mid-workability concrete, in this research, the performance range for high workability of mid-workability concrete mixture using rheology. Because of the mixture characteristics of generally used normal strength concrete such as relatively high water-to-cement ratio and no SCMs, segregation of coarse aggregate should be prevent to achieve a successful high workability. From the experimental study in this research scope, 5 to 35 Pa.s of plastic viscosity was desirable to prevent segregation for nid-workability concrete, and general performance range with rheological parameters was provided.