• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.11-18
• /
• 2003

We consider a single-input-single-output nonlinear system which is represented in a normal form. The model contains the uncertainty. A high-gain observer is used to estimate the states variables to reject a modeling uncertainty We design the globally bounded output feedback controller using sliding mode control to stabilize the closed-loop system. The globally bounded output feedback controller reduce the peaking in the states variables. The proposed method give a more design freedom in the design of the globally bounded controller than that of the previous work.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.249-256
• /
• 1999

본 논문에서는 DC link단에 단일 전류 센서를 사용한 3상 전압 원 PWM 컨버터의 제어방법에 대해서 제안하고, DC link 전류로부터 3상 전류를 재 구축하는 PWM 변조 전략을 제시한다. 단일 전류 센서를 사용하여 3상 전류를 재 구축시 문제점은 2개의 유효 벡터중 1개 또는 2개의 유효벡터가 아주 짧은 시간 동안 인가 되었을 때로 이 경우에는 3상 전류를 적절히 재 구축할 수 없게 된다. 이런 경우에는 예측 전류 제어기를 사용하여 모든 동작 조건에서 믿을만한 3상 전류를 재 구축한다. 또한 디지털 제어로 인한 지연에 대한 보상도 제시된다. 본 논문에서는 3상 PWM 컨버터 제어시 예측 상태 관측기를 사용한 단일 센서 전류 제어가 논의되며 실험 결과로 입증된다.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.61-70
• /
• 2017

In this study, an extended-state-observer (ESO) based non-linear servo control is introduced for an electro-hydrostatic actuator (EHA). Almost hydraulic systems not only are highly non-linear system that has mismatched uncertainties and external disturbances, but also can not measure some states. ESO that only use an output signal can be used to compensate these uncertainties and estimate unmeasurable states. To improve the position tracking performance, the barrier Lyapunov function (BLF) that can guarantee an output tolerance is introduced for the position tracking error signal of back stepping control procedures. Finally, the proposed servo control is compared with the proportional-integral (PI) control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.5
• /
• pp.352-360
• /
• 2010

This paper proposes a precise position control of an automatic door using a disturbance observer. Although the conventional PID controller is usually used for an automatic door system, the demand of the robust controller considering the parameter deviations and disturbances is increasing due to the various size and weight of a door. The linear model for an automatic door system is presented. Based on this model, the LQR controller using a state feedback controller and an observer are suggested. A disturbance observer to compensate the undesirable factors is also proposed. Simulation and Experimental results are presented to illustrate the feasibility of the proposed control strategy.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.5
• /
• pp.520-525
• /
• 2003

This paper concerns a design methodology of observer-based output-feedback digital controller for Takagi-Sugeno(TS) fuzzy systems using intelligent digital redesign (IDR). The term of IDR involves converting an analog fuzzy-mode-based controller into an equivalent digital one in the sense of state-matching. The considered IDR problem is viewed as convex minimization problems of the norm distances between linear operators to be matched. The stability condition is easily embedded and the separations principle is explicitly shown.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.577-578
• /
• 2014

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.2
• /
• pp.157-164
• /
• 2007

In this paper, a novel sensorless drive for brushless DC (BLDC) motor using the fuzzy back-EMF observer is proposed to improve the performance of conventional sensorless drive methods. Existing sensorless drive methods of the BLDC motor have low performance at transients or low speed range and occasionally require additional circuits. To cope with these problems, the back-EMF of the BLDC motor must be precisely estimated by a fuzzy logic, which is suitable to estimate the back-EMF which has a trapezoidal shape. The proposed algorithm using fuzzy back-EMF observer can achieve robust control for the change of an external condition and continuously estimate position of the rotor at transients as well as at steady state. The superiority of the proposed algorithm is proved through the simulation compared with other sensorless drive methods.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.363-370
• /
• 2022

In this paper, an estimation algorithm for state of charge (SOC) was applied using an equivalent circuit model (ECM) and an Extended Kalman Filter (EKF) to improve the estimation accuracy of the battery system states. In particular, an observer was designed to estimate SOC along with the aged capacity. In the case of the fresh battery, when SOC was estimated by Kalman Filter (KF), the mean absolute percentage error (MAPE) was 0.27% which was smaller than MAPE of 1.43% when the SOC was calculated by the model without the observer. In the driving mode of the vehicle, the general KF or EKF algorithm cannot be used to estimate both SOC and capacity. Considering that the battery aging does not occur in a short period of time, a strategy of periodically estimating the battery capacity during charging was proposed. In the charging mode, since the current is fixed at some intervals, a strategy for estimating the capacity along with the SOC in this situation was suggested. When the current was fixed, MAPE of SOC estimation was 0.54%, and the MAPE of capacity estimation was 2.24%. Since the current is fixed when charging, it is feasible to estimate the battery capacity and SOC simultaneously using the general EKF. This method can be used to periodically perform battery capacity correction when charging the battery. When driving, the SOC can be estimated using EKF with the corrected capacity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.173-181
• /
• 2014

This paper addresses the problem of model matching control for a class of systems modeled as input/output asynchronous sequential machines. Based on the feedback control scheme, we design a corrective controller that compensates the behavior of the closed-loop system so as to match a reference model. Whereas the former studies use state observers and the output burst for designing a controller, the present research needs neither the observer nor the output burst in controller design. We define the 'output equivalent machine' of the considered machine to describe the existence condition and the construction algorithm for the proposed controller. A case study is provided to show the operation of the proposed corrective controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.10
• /
• pp.931-940
• /
• 2017

This paper describes a predictive fault diagnosis algorithm for autonomous vehicles based on a kinematic model that uses a sliding mode observer. To ensure the safety of autonomous vehicles, reliable information about the environment and vehicle dynamic states is required. A predictive algorithm that can interactively diagnose longitudinal environment and vehicle acceleration information is proposed in this paper to evaluate the reliability of sensors. To design the diagnosis algorithm, a longitudinal kinematic model is used based on a sliding mode observer. The reliability of the fault diagnosis algorithm can be ensured because the sliding mode observer utilized can reconstruct the relative acceleration despite faulty signals in the longitudinal environment information. Actual data based performance evaluations are conducted with various fault conditions for a reasonable performance evaluation of the predictive fault diagnosis algorithm presented in this paper. The evaluation results show that the proposed diagnosis algorithm can reasonably diagnose the faults in the longitudinal environment and acceleration information for all fault conditions.