• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.579-587
• /
• 2014

This paper deals with precise analytical state equation modeling of a variable speed refrigeration system (VSRS) for optimum control in state space. The VSRS is described as multi-input and multi-output (MIMO) system, which has two controlled variables and two control inputs. First, the Navier-Stokes equation and mass flow rate were applied to each component of the basic refrigeration cycle to build a dynamic model. The dynamic model, represented by a differential equation, was transformed into the state equation formula. Next, a full-order state observer was built to estimate all of the state variables to compose an optimum control system. Then, an optimum controller was designed to minimize an evaluation function that has input energy and control error. Finally, simulations and experiments were conducted to verify the validity of the proposed modeling and designed optimum controller to regulate target temperature and superheat in a 1RT oil cooler system. The results show that the proposed method, state equation modeling and optimum control, is efficient to ensure optimal control performance of the VSRS.

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.35-44
• /
• 1996

This paper presents a new type of fuzzy-sliding mode controller for robust tip position control of a single-link flexible manipulator subjected to parameter variations. A sliding mode controller is formulated with an assumption that imposed parameter variations are bounded so that certain deterministic performance can be guaranted. In the design of the sliding mode controller, so called moving sliding surface is adopted to minimize the reaching phase and thus mitigate system sensitivity to the variations. The sliding mode controller is then incorporated with a fuzzy technique to reduce inherently ever-existing chattering which is impediment in position control of flexible manipulators. A set of fuzzy parameters and control rules are obtained from a relation between predetermined sliding surface and representative points in the state space. Computer simulations are undertaken in order to demonstrate superior control performance of the proposed methodology.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.185-190
• /
• 2019

This study aims to apply the mathematical method of fractional order derivatives to the controller that controls the system response. In general, the Laplace transform of the PID controller has an exponent of the integer order of s. The derivative of the fractional order has a fractional exponent of s when it is transformed by Laplace transform. Therefore, this controller proposes a design method with the result of discrete time conversion. Because controllers with fractional exponents of s are not easy to design. This controller is applied to a standard secondary system and its performance is examined. Then, it applies to solenoid valve which is widely used in industrial field. A Luenberger's observer was designed to estimate the disturbance state and the observed state was applied to the fractional order controller. As a result, uniform and precise control performance was obtained. It was confirmed that the position error of the steady state is within 0.1 [%] and the rising time is within about 0.03 [s].

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.2
• /
• pp.82-88
• /
• 2005

A compensation scheme for a class of linearly parameterized systems is presented. The compensator consists of a typical linearizing control and an adaptive observer with integration type update law, which is based on Speed Gradient (SG) algorithm.. Instead of the intermediate functions of the compensation schemes suggested by other researchers, the proposed compensator is designed with some design functions which guarantee the growth, convexity, attainability, and pseudo gradient conditions in the update law. The scheme achieves the asymptotic stability of the tracking error and the boundedness of the estimation errors. A numerical example is given to demonstrate the validity of the proposed design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.529-532
• /
• 2012

This paper presents the system modeling, analysis, and controller design and implementation with a inverted pendulum system in order to test robust algorithm for sweeping machine. The balancing of an inverted pendulum by moving pendulum robot like as 'segway' along a horizontal track is a classic problem in the area of control. This paper will describe two methods to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. The results of real experiment show that the proposed control system has superior performance for following a reference command at certain initial conditions.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.149-153
• /
• 2003

AC 부하를 갖는 동기전동기에 있어서, 동기전동기의 속도리플을 저감시키기 위한 문제를 풀기위해 3가지 제어기법에 대해 비교를 한 후 가장 강인한 제어기법에 대해 분석하였다. AC 부하를 갖는 특별한 제어 대상으로 엑스선 전산화 단층촬영 장치(CT)용 겐트리를 선정하였으며 시스템이 갖는 특별한 구조에 의해 이러한 시스템 특성을 갖는다. 동기전동기의 출력 축에 링(Fing) 모양의 원판 프레임을 갖으며, 이 원판 표면에 무게가 서로 다른 여러 장치(X_선 튜브, X-선 검출기, 고압발생장치, DAS 장치, 온도조절장치 등)를 부착하여 영상 획득 시스템의 회전부를 구축하기 때문이다. 이러한 시스템에서는 무게 평형을 갖지 못하는 편심 무게가 존재하게 되며 이로써 전동기 관점에서는 AC 부하처럼 인식되는 제어 조건으로 인식 될 수 있다. AC 부하를 갖는 동기전동기에 대해 일반적인 벡터제어 알고리즘으로 제어를 수행하면 정상상태에서도 속도 오차가 "0" 으로 줄어들지 않고 AC 형태의 오차 성분이 존재하며 편심 무게의 크기에 비례하여 진폭이 커지는 특성을 갖는다. 이러한 문제점을 해결하기 위하여 Sine파 보상전류를 갖는 속도제어기법, 펀심부하토크 관측기를 이용한 속도제어기법, 그리고 기준모델제어기법을 소개하였다. 각 방법에 대한 실험 결과로부터 편심무게의 변동과 편심 위치의 변동 조건에서 기준모델제어기법이 강인한 제어 특성과 리플저감 측면에서 가장 우수함을 검증하였다. 이로써 AC 부하 조건에서 고정도 속도 제어기가 요구되는 경우 좋은 선택의 지침이 될 수 있다고 본다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.154-161
• /
• 2005

This paper proposes a speed-sensorless induction motor control system using a rotor speed compensation. To explain the proposed system, this paper describes an induction motor model in the synchronous reference frame for the vector control. The rotor flux is estimated by the rotor flux observer using the reduced-dimensional state estimator technique. The estimated rotor speed is directly obtained from the electrical frequency, the slip frequency, and the rotor speed compensation with the estimated q-axis rotor flux. The error of the rotor time constant is indirectly reflected in the rotor speed compensation using the compensation of the flux error angle. To precisely estimate the rotor flux, the actual value of the stator resistance, whose actual variation is reflected, is derived. An implementation of pulse-width modulation (PWM) pulses using an effective space vector modulation (SVM) is briefly mentioned. For fast calculation and improved performance of the proposed algorithm, all control functions are implemented in software using a digital signal processor (DSP) with its environmental circuits. Also, it is shown through experimental results that the proposed system gives good performance for the speed-sensorless induction motor control.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.129-130
• /
• 2007

Self servo track writing(SSTW)은 servo track writer(STW)를 이용하지 않고 hard disk drive의 내부 VCM을 이용하여 servo track을 기록하는 방식이다. SSTW는 이전 servo track을 상대적인 reference로 하여 기록하게 되므로 초기에 발생된 error와 외부의 disturbance의 영향으로 error는 급속하게 증가된다. 이것을 radial error propagation 이라 한다. 본 논문에서는 radial error propagation을 억제하기 위한 correction signal을 설계하고 servo writing 과정에서 발생하는 disturbance의 영향을 제거하기 위하여 disturbance observer(DOB)를 add-on type으로 구성하여 tracking 제어기를 설계하였다. 또한 DOB를 적용한 경우와 유사한 gain margin, phase margin과 sensitivity function을 갖는 제어기를 설계하여 그 성능을 비교하였다. 제안된 방식은 radial error propagation을 억제 하였을 뿐만 아니라 disturbance의 최소화하여 쓰여진 track의 DC track spacing과 AC track Squeeze가 개선된 것을 모의실험을 통하여 검증하였다.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.424-427
• /
• 2017

Smith predictor can't be applied to the time delay systems that have poles near the origin or a pure integrator or a modeling error, because of occurring the steady state error for the step disturbance. In this paper, a new Smith predictor controller for these systems is designed to eliminate the effects of the disturbance. A disturbance observer to estimate a disturbance is proposed and a new controller is designed using the estimated disturbance. As a result, the new controller can eliminate the effects of the disturbance and modeling error. The simulation results for the steam superheater and the steam pressure systems verify the efficiency of the proposed controller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1092-1099
• /
• 2006

Displayed system equationally using accurate dynamic modeling of whole system including induction motor and load to analyze induction motor to normal condiction's action characteristic as well as transient characteristic using power converter device such as inverter in this paper. Also, presume adhesive power calculation through speed sensorless vector control and load torque disturbance observer for maximum tractive force control. Confirmed proposed algorithm through simulation and an experiment using railroad experiment equipment to embody control algorithm of such system. With relation of adhesive power about the wage speed by speed addition and subtraction of railway vehicle, embodied all sorts item by experiment equipment.