• Polymer(Korea)
• /
• v.31 no.6
• /
• pp.532-537
• /
• 2007

The rheological properties of the solutions of atactic poly(vinyl alcohol)(PVA) in dimethyl sulfoxide (DMSO) were investigated in terms of molecular weight distribution (MWD) of the polymer. The dynamic viscosity (${\eta}#$) and loss modulus (G") for the PVA/DMSO solutions with broader MWD were lower than those with narrower MWD at the similar $M_w$. It could be explained by the fact that the free volume for the solution with broader MWD at the similar $M_w$ was increased. The storage modulus(G#) of 14 wt% PVA/DMSO solutions with broader MWD was higher than that with narrower MWD at a lower frequency than 1.3 rad/sec, but lower than that with narrower MWD at a higher frequency (>1.3 rad/sec). The slopes of modified Cole-Cole plots of the 14 wt% solutions showed that as the MWD was broadened, the phase transition with frequency was more noticeable.

• Journal of Korea Water Resources Association
• /
• v.43 no.7
• /
• pp.597-608
• /
• 2010

In this study, a method for soil moisture estimation was proposed to obtain the nationwide soil moisture distribution map using on-site soil moisture observations, rainfall, surface temperature, NDVI, land cover, effective soil depth, and CART (Classification And Regression Tree) algorithm. The method was applied to the Yong-dam dam basin since the soil moisture data (4 sites) of the basin were reliable. Soil moisture observations of 3 sites (Bu-gui, San-jeon, Cheon-cheon2) were used for training the algorithm and 1 site (Gye-buk2) was used for the algorithm validation. The correlation coefficient between the observed and estimated data of soil moisture in the validation sites is about 0.737. Results show that even though there are limitations of the lack of reliable soil moisture observation for various land use, soil type, and topographic conditions, the soil moisture estimation method using ancillary data and CART algorithm can be a reasonable approach since the algorithm provided a fairly good estimation of soil moisture distribution for the study area.

• Applied Biological Chemistry
• /
• v.25 no.4
• /
• pp.224-231
• /
• 1982

${\alpha}-Tocopherol$ was found to be a fluorescent probe in determination of the phasetransition temperature of liposome. Since this was a discovery of a new aspect of ${\alpha}-tocopherol$ as an important biochemical molecule, its molecular spectroscopic characterization was carried out in order to obtain some informations on its spectral and, structural properties in various media, anticipating that the compound may entertain a wide applications in biochemical systems as a spectroscopic probe. Two species of α${\alpha}-tocopherol$, monomer and dimer, were found to exist in organic media, especially in solvents of nonhydrogen bonding ability. Monomer with maximum UV-absorption around $(291{\sim}294nm)$ is highly fluorescent, while dimer which is formed by intermolecular hydrogen bonds and absorbes with spectral peak at 298nm is nonfluorescent. ${\alpha}-tocopherol$ incorporated to liposome exhibits emission property quite different from that in various organic media showing broad and red-shifted fluorescence excitation and emission spectra. This spectral abnormality is to be interpreted to arise from chromanolate-type ion, H-dissociated ${\alpha}-tocopherol$.

• Membrane Journal
• /
• v.10 no.3
• /
• pp.130-138
• /
• 2000

Polyethersulfone (PES) asymmetric membranes for gas separation were prepared by dry/wet phase inversion method and their separation properties for CO$_2$ and N$_2$ gases were investigated. The effects of important variables such as composition of casting solution and evaporation time in preparation of asymmetric gas membrane on membrane morphology and the separation properties were analyzed and the optimum condition of membrane preparation was established. To compensate the defects like pinholes existed on skin layer of the membrane prepared, the membranes were coated with silicone resin. By comparing separation properties after coating with those before coating, we found that the coating of silicone resin was effective to enhance the separation properties. The casting solution mainly used in this study consisted of PES, N-methyl-2-pyrrolidone, acetone, ethanol and distilled water was used as coagulation agent. It was shown that the selectivity for CO$_2$/N$_2$ was getting higher but the permeability decreases, as the contents of PES and volatile organic solvent and evaporation time increased. The selectivity for CO$_2$/N$_2$ and permeability of CO$_2$ of the membrane prepared under the optimum condition were found to be 61 and 21 GPU, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.313-321
• /
• 2019

Diatomite is a silicic porous sedimentary rock composed of diatom frustules, used for filtration aid, filler, absorbent, abrasive, carrier, insulator, and fertilizer. During the calcination of diatomite to improve physical properties for filtration-aid application, amorphous silica is transformed to cristobalite. X-ray diffraction and scanning electron microscopy studies were carried out for 17 diatomite samples, showing that 16 diatomite samples contain cristobalite in the range of 6~100 %. Concentration of respirable cristobalite in air is regulated as harmful substances, but the residual cristobalite in food is treated as generally safe substance. The determination procedure of cristobalite content in food was established for managing food safety. Calibration curve of cristobalite filtered on silver membrane were obtained by X-ray diffraction. The lower limit of quantification was evaluated as 2.7 mg. The cristobalite was not detected in the analyses of selected food samples using the established procedure.

• Korean Journal of Materials Research
• /
• v.5 no.1
• /
• pp.3-11
• /
• 1995

$(TiO_{2})$ thin films were deposited on p-Si(100) substrate by APMOCVD using titanium isopropoxide as a source material. The deposition mechanism was well explained by the simple boundary layer theory and the apparent activation energy of the chemical reaction controlled process was 18.2kcal /mol. The asdeposited films were polycrystalline anatase phase and were transformed into rutile phase after postannealing. The postannealing time and the film thikness as well as the postannealing temperature also affected the phase transition. The C-V plot exhibited typical charateristics of MOS diode, from which the dielectric constant of about 80 was obtained. The capacitance of the annealed film was decreased but those of the Nb or Sr doped films were not changed. I-V characteristics revealed that the conduction mechanism was hopping conduction. The postannealing and the doping of Nb or Sr cause to decrease the leakage current and to increase the breakdown voltage.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.9-14
• /
• 1988

Perovskite type compounds of the $La_{1-x}Ca_xFeO_{3-y}$ system were prepared from stoichiometric mixtures of La_2O_3,\;CaCO_3$, and Fe(NO-3)_3{\cdot}9H_2O$ by heating at 1100$^{\circ}C$ for 24 hours. The crystallographic structures of the solid solutions of all compositions were orthorhombic systems. X-ray diffraction and Mohr salt analysis revealed that at higher y value the phase transition due to vacancy ordering occured and that the lattice volume decreased when the x value was increased. The value of nonstoichiometric ratio y were found to be in the range of $0.0{\sim}0.5$. Electrical conductivities of this systems are measured in temperature range of -100 to 100$^{\circ}C$. Ionic contribution to total conductivity was found from activation energy in the phase containing the open pathway due to vacancy ordering.

• Journal of the Korean Chemical Society
• /
• v.39 no.10
• /
• pp.806-811
• /
• 1995

The electrical properties for $(Ba,Sr)_{1-x}Y_xTiO_3$(x=0.001∼0.009, BSYT) with a positive temperature coefficient of resistivity(PTCR) effect were investigated. The BSYT powder was prepared by oxalate coprecipitation method. It was found that the large PTCR effect was appeared up to 0.3 mol% and decreased above 0.5 mol% of the yttrium concentration. The plot of temperature vs. $1{\varepsilon}$m(T) above Curie temperature($T_c$) was agreed with Curie-Weiss law. The potential barrier calculated from measured resistivity and dielectric constant of specimens was high up to 0.3 mol% and reduced above 0.5 mol% of yttrium concentration as the curve of PTCR effect.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.115-119
• /
• 2001

Hydroxyapatite-yttria stabilized zirconia bioceramics containing fine zirconia particles were prepared as 3-layered functionally graded materials (FGMs) using a spark plasma sintering (SPS) and hot pressing (HP) apparatuses. The pretreatment of the raw hydroxyapatite promoted the sinterability of hydroxyapatite. The maximum density of pretreated FGM composites could be obtained at lower temperature than that for he untreated FGM samples. No decomposition from hydroxyapatite to three calcium phosphate (TCP) was observed in FGMs of HAp-$ZrO_2$ sintered below $1200^{\circ}C$ for 8 min under 10 MPa by SPS. However, the transformation of the tetragonal zirconia to the cubic modification had occurred in FGMs at this temperature. The presence of zirconia i.e. stress induced transformation of zirconia may be expected to enhance the mechanical properties of HAp-$ZrO_2$ FGM. The SPS is concluded as a better method to fabricated the FGM with dense and high strength compared with HP process.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.177-180
• /
• 2009

This study was investigated to know the thermal decomposition for the propellant ingredients and 2 kinds of HTPE propellants. The thermal analysis of the propellant ingredients used in this study showed that the thermal stability of these materials decreases in the following order : AP > HTPE > AN > BuNENA. In addition, propellant HTPE 002 containing AN showed that an endothermic process at around $125^{\circ}C$ corresponding to the solid-solid phase change($II{\rightarrow}I$) of AN was followed by the exothermic process due to decomposition of BuNENA/AN until $200^{\circ}C$. The critical temperature, $T_c$, of thermal explosion for the propellants HTPE 001 and HTPE 002, were obtained from the non-isothermal curves at various heating rates, by using Semenov's thermal explosion theory. Kissinger's method was employed to obtain the activation energy of the thermal decomposition, and it was used to calculate the $T_c$.