• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.131-136
• /
• 2015

The chemical tank loading problem has been classified as nondeterministic polynomial time (NP)-complete problem because of the polynomial-time algorithm to find the solution has been unknown yet. Gu$\acute{e}$ret et al. tries to obtain the optimal solution using linear programming package with $O(m^4)$ time complexity for chemical tank loading problem a kind of bin packing problem. On the other hand, this paper suggests the rule of loading chemical into minimum margin tank algorithm with O(m) time complexity. The proposed algorithm stores the chemical in the tank that has partial residual of the same kind chemical firstly. Then, we load the remaining chemical to the minimum marginal tanks. As a result of experiments, this algorithm reduces the $O(m^4)$ of linear programming to O(m) time complexity for NP-complete chemical tank loading problem.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.93-98
• /
• 2018

This paper introduces the development of HF(NFC) and UHF band(13.56 MHz, 920 MHz) tag antennas, imbedded in a box. In dual band antennas, the HF band tag can be used to inspect the box using NFC, and the UHF band tag can be used for logistics. The dielectric constant of the box material is measured and used for simulation. The Ntag213 chip manufactured by NXP is used in HF loop antennas, since NFC is possible with Ntag213. For the UHF band, the Higgs-3 chip manufactured by Alien is used. The HF tag antenna is located at the center of the UHF tag antenna, and the location of the HF tag antenna is calculated while considering coupling effects. The designed tag can be used by both the bands for the purposes of logistics and authentication.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.139-146
• /
• 2009

In this study, an assessment is made for the helicopter vibration reduction of composite rotor blades using an active twist control concept. The piezoceramic shear actuation mechanism along with elastic couplings of composite blades is used for vibration reduction. The rotor blades are modeled as composite box-beams with actuator layers bonded on the outer surfaces of the thin-walled section. The governing equations of motion for helicopter blades are obtained using Hamilton's principle. A time domain unsteady aerodynamic theory with free wake model is used to obtain the airloads. Various rotor configurations with different elastic couplings with appropriate actuator placement are used to investigate the hub vibration characteristics. Numerical results show that a substantial reduction of $N_b$/rev hub vibration can be achieved using the optimal control algorithm.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.137-140
• /
• 2004

The minimum ignition temperature at which the dust cloud can spontaneously ignite is considered to be very important in industries to prevent explosion occurring in hot surfaces. This paper has dealt with the experimental study of the determination of minimum ignition temperature of Hydroxy Propyl Methyl Cellulose (HPMC) dust cloud. We have used the Godbert-Greenwald Furnace Apparatus to determine the ignition temperature and limiting oxyten concentration for dust could. The experimental determinations on the minimum ignition temperature were carried out with various particle size with nominal diameters 45, 75 and 106${\mu}m$. The limiting oxygen concentration of dust cloud was determinated for the smaller size(45${\mu}m$) HPMC. Minimum ignition temperature of dust cloud was at 364$^{\circ}C$ for the concentration of 2.5g/L in the air and became higher with the increasing of nitrogen concentration. It was also found that the ignition didn't occur when the oxygen concentration was below 10%, and limiting oxygen concentration is at 11%.

• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.9-14
• /
• 2009

In this study, the stress and deformation characteristics of corner protection in which is fabricated in an insulation area have been analyzed using a finite element method. The proposed corner protection may increase the strength and leakage safeties of conventional LNG storage system. The stress and deformation of LNG storage tank system are computed for an insulation panel box, membrane inner tank, and prestressed concrete outer tank. The FEM computed results indicate that the stress and displacement of new membrane LNG tank system with a corner protection between an inner tank and an outer tank are reduced in comparison to those of a conventional membrane LNG tank. This is explained that the strength safety of LNG membrane tank system may be increased due to a strength stiffness of a corner protection.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.109-114
• /
• 2008

Purpose: To assess the reproducibility and repeatability for each color vision test method. Methods: The subjects for color vision test were 30 students without congenital color vision deficiency and they major in optometry in a university, Korea. The type of color vision test selected for this study were Hans color vision test, Hans 15 hue test and Lanthony D 15 hue test. The Ishihara test was added for assessment of reliability of inter-tester. Results: All of the subjects were classified into normal at pseudoisochromatic plates, but one subject's result showed mild blue-yellow color deficiency at Hue discrimination. Results of 3 repeated test for subjects and inter-tester examination showed no errors at pseudoisochromatic plates. There were differences in mild errors among repeated test at Hue discrimination, but no differences were found in the results of repeated test to classify color vision deficiency. Conclusion: Each tester had better be more skilled to test even simple color vision test for eliminating the possibility of mild errors. Each subject might just as well be careful in color vision test. It is required to test both method of pseudoisochromatic plates and Hue discrimination in screening test.

• Journal of Food Hygiene and Safety
• /
• v.21 no.4
• /
• pp.258-262
• /
• 2006

To investigate additive effects of endocrine disruptors, we have histopathologically studied the exchanges of the reproductive organ to ovariectomized ICR mice. Female ICR mice were ovariectomized and then treated with endocrine disruptors after two weeks. Macroscopic exchanges, which were body weight, feed and water intake, of all groups were not seen during experiment period. Histopathological changes of uterine epithelial cells, vaginal epithelial cells, mammary glands and the diameter in uterine tubles were observed. In the results, the histopathological sensitivity to endocrine disruptors effect was more seen to the vaginal epithelial cell height than others. The additive estrogenic effects of endocrine disruptors, which were combinations of DEHP, DBP and BPA, were seen with E2 and BPA treatments. These results offers a sysmatic and mechanistically informative approach to assessing estrogenicity. It provides a useful profile of activity using a reasonable amount of resources and is compatible with the study of individual chemicals as well as the investigation of interactions among combinations of chemicals.

• Asian Journal of Turfgrass Science
• /
• v.9 no.3
• /
• pp.187-198
• /
• 1995

The objective of this research was to produce sod by box seeding for zoysiagrass or by vegetative propagation for zoysiagrass and manilagrass.1 Various ratio of peatmoss to sand(v /v) were prepared to find idea[ medium for fast and light weight sod production. Then, the days required for sod formation, the effect of growth regulators on the growth of turfgrass, and the various storage methods for winter keeping of sods were also investigated. 1.The mixed medium of sand and peatmoss(v /v, 1 : 2) showed more biomass production than that of sand. 2.In comparison of seeding rate of zoysiagrass, the amount of log /$m^2$ was most effective in the fast and dense sod formation. The amount of 20g /$m^2$ also showed fast sod formation. But, it resulted in weak plant and less tillering. During April to June, about 100 days were required to form sod with seeding rate of 5g /$m^2$ regardless of seeding time. Whereas 80 days were required to form sod in the rate log /$m^2$, which was 20 days shorter than that of 5g /$m^2$. 3.More than 85% of shoots in sod stored in field or plastic house during the winter time resumed the growth in good appearance after transplanting. The whole covering of ground with sod resulted in less weeds and faster formation of lawn. 4.Vegetative propagation of manilagrass showed about 7 to 15 days faster formation of sod than that of zoysiagrass. Application of GA increased shoot growth and BA increased the total number of tillering. However, the effects of the combined application of GA and BA were negligable.

• Journal of the Korean Society for Railway
• /
• v.11 no.6
• /
• pp.536-542
• /
• 2008

In concrete slab track, the signal current using wayside transmitter of ATP (Automatic Train Protection) system is influenced by reinforcing bars. The magnetic coupling between reinforcing bars and wayside transmitter of ATP system as a filter makes an input current distorted. So, it makes an alternating current signal with a desirable size not transmit to on-board system of a train. Way to decrease the distortion of an input current signal frequency is to avoid maximum induction current frequency. And the induction phenomenon between reinforcing bars insulated and wayside transmitter of ATP system does not occur. In this paper, we represent the model about wayside transmitter of ATP system and reinforcing bars on the concrete slab tracks, and calculated the parameters demanded for the model. Also, we demonstrated it through the Maxwell program. Furthermore, we calculated impedance on wayside transmitter used in KVB system and ERTMS/ETCS system which are a kind of ATP system, frequency response of induction current, using Matlab, and demonstrated the validity of it, using PSpice program.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.208-213
• /
• 2011

We calculated the EPR (electron paramagnetic resonance) line-shape function. The line-widths of a -doped single crystal was studied as a function of the temperature with 0.5 and 2 at. at a frequency of (X-band). The line-width decreases with increasing temperature, such temperature behavior of the line-width can indicate a motional narrowing of the spectrum, when impurity ions substitute for host ions in an off-center position, and thus there can be fast jumping of dipoles between several symmetrically equivalent configurations. Therefore, the present technique is considered to be more convenient to explain the resonant system as in the case of other optical transition problems.