• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.529-533
• /
• 2006

Supernumerary teeth are defined as an excess in the number of teeth when compared to the normal dental formula. They are more prevalent in the permanent dentition than the primary dentition. Supernumerary teeth can occur in the maxilla, mandible, or both. But the majority are found in the maxilla and most of it is found in the premaxilla region The present cases documents about the uncommon cases of supernumarary teeth on maxillarty premolar area and mandibular incisal area.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.3
• /
• pp.285-292
• /
• 2011

The purpose of thise study was to measure the thickness of the sinus lateral wall using computed tomography (CT), and to find the most suitable vertical position for lateral window opening prior to sinus elevation. Thirty patients requiring sinus elevation had CT images taken with Philips Brilliance iCT. The thickness of the sinus lateral wall was measured according to its vertical position against the sinus inferior border, and its mean was calculated through three repeated measurements. When measured 2 mm above the sinus inferior border (SIB+2), the thickness of the sinus lateral wall was observed to be more than 2 mm. When measured 3 mm above the sinus inferior border (SIB +3), the sinus lateral wall was less than 2 mm in thickness. It is recommended that the lateral wall window be made 3 mm above the sinus inferior border when performing sinus elevation using the lateral approach.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.349-357
• /
• 2012

The purpose of this study was to measure the thickness of the sinus lateral wall using cone-beam computed tomography (CBCT), and to find the most suitable vertical position for lateral window opening prior to sinus elevation. Fifty three patients requiring sinus elevation had CBCT scans acquired by CB MercuRay (Hitachi, Medico, Tokyo, Japan) from July, 2010 to June, 2012. The thickness of the sinus lateral wall was measured according to its vertical position against the sinus inferior border (SIB), and its mean was calculated through two repeated measurements. The thickness of the sinus lateral wall was more than 2 mm at 2 mm above the sinus inferior border (SIB+2), however, it was less than 2 mm at 3 mm above the sinus inferior border (SIB+3). In conclusion, it is recommended that the inferior border of lateral wall window be made 3 mm above the sinus inferior border during sinus elevation using the lateral approach considering the thickness of the sinus lateral wall.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.155-167
• /
• 2023

The aim of this study was to investigate the effects of slow maxillary expansion (SME) on the dentoalveolar, skeletal, upper airway, and maxillary sinus using cone-beam computed tomography (CBCT). Twenty-three orthodontic patients (mean age 8.93 ± 1.61 years) who were treated with maxillary expansion using banded hyrax in the Department of Pediatric Dentistry at Jeonbuk National University Dental Hospital were included. According to the expansion speed applied, they were divided into two groups: SME (12 subjects, mean age 8.92 ± 1.45 years) and rapid maxillary expansion (RME, 11 subjects, mean age 8.94 ± 1.84 years). CBCT were obtained before (T0) and after (T1) the treatment and were analyzed with InVivo5 software (Anatomage, San Jose, CA, USA). Descriptive statistics showed no significant differences between the two groups in age, sex, or skeletal maturity. There were significant increases in maxillary width at the dentoalveolar and skeletal levels for both groups. Upper airway volume revealed a significant increase of 38.59% in the SME group and 28.72% in the RME group. However, there was no significant difference between SME group and RME group in all measurements. This study suggested the efficacy of SME in growing patients. SME was effective in increasing not only dentoalveolar and skeletal measurements but also airway volume. Therefore, pediatric dentists should select an appropriate expansion method considering the physiological aspects of periodontal tissues and discomfort in growing children.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.519-525
• /
• 2010

Ectopic eruption means the eruption of the tooth in an abnormal position due to multiple factors, which found most frequently in maxillary fist permanent molars, mandibular lateral incisors and maxillary permanent canines. Ectopic eruption of the maxillary first permanent molar occurs when the molar erupts with a more mesial angulation than normal, and locks itself in an atypical resorption on the distobuccal root of the second primary molar. The maxillary first permanent molar plays important roles for mastication and occlusion, so ectopically erupted maxillary first permanent molars should be relocated into proper position. Treatment options are separation by insertion of the brass wire or elastic rings, preparation of distal aspect of the maxillary second primary molar, using fixed or removable appliance with finger spring, and placement of space maintainer or space regainer after extraction of the maxillary second primary molar. We report three cases treated of ectopically erupted maxillary first permanent molar by re-setting of stainless steel crowns, placement of brass wire and using active plate. We could find out distal movement of maxillary first permanent molars into proper position and normal occlusion.

• The korean journal of orthodontics
• /
• v.39 no.2
• /
• pp.83-94
• /
• 2009

Objective: The aim of this study was to investigate the 3-dimensional position of the center of resistance of the 4 maxillary anterior teeth, 6 maxillary anterior teeth, and the full maxillary dentition using 3-dimensional finite element analysis. Methods: Finite element models included the whole upper dentition, periodontal ligament, and alveolar bone. The crowns of the teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces to the teeth. A force of 100 g or 200 g was applied to the wire beam extended from the incisal edge of the upper central incisor, and displacement of teeth was evaluated. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The results of study showed that the center of resistance of the 4 maxillary anterior teeth group, the 6 maxillary anterior teeth group, and the full maxillary dentition group were at 13.5 mm apical and 12.0 mm posterior, 13.5 mm apical and 14.0 mm posterior, and 11.0 mm apical and 26.5 mm posterior to the incisal edge of the upper central incisor, respectively. Conclusions: It is thought that the results from this finite element models will improve the efficiency of orthodontic treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.4
• /
• pp.630-635
• /
• 1999

Transposition has been described as an interchange of position of permanent tooth and is a relatively rare dental anomaly. Transposition of teeth may occur both in the maxillary and mandibular arches. but it appears more often in the maxilla of individual teeth, the maxillary canine is the most often involved. A canine transposes most often with a first premolar and less frequently transposes with a lateral incisor. Incomplete transposition is a condition describing an interchange in the position of the crowns of two permanent teeth, while the root apices remain in their relative position. Complete transposition is a situation in which both the crowns and entire root structure are transposed. The etiologic factors of transposition are tooth buds interchange, retained deciduous canines, migration of the erupting canine, trauma to deciduous teeth etc. This report describes a case of a transposition between a maxillary left canine and a lateral incisor and impaction of a maxillary left central incisor due to trauma to deciduous dentition.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.1-20
• /
• 1997

Skeletal Class III malocclusions are growth-related discrepancies, and the problems are more severe until growth is complete. Causes of skeletal Class III malocclusion are classified into mandibular overgrowth, maxillary deficiency, and combination of the two. Face mask has been recommended for treatment of Class III malocclusion with maxillary deficiency in the early time of growth. Numerous experiments were performed and clinical studies have been reported on face mask ; nevertheless, studies on profile changes and stability after treatment of face mask are considered to be somewhat insufficient. The author selected 50 patients who can be checked for follow-up. They had been diagnosed as skeletal Class III malocclusion with maxillary deficiency and then treated with face mask ; the sample group was divided according to sex, treatment beginning age, palatal suture opening (intraoral appliance). For each group, changing pattern of facial profile and stability of treatment observed, and comparison with 20 Korean normal children(Angle's Class I). The following results were obtained. 1. skeletal, dental, and soft tissue measurements indicated more changes in the amounts of maxillary forward movement during face mask treatment. 2. R.P.E. group showed more significant maxillofacial changes and La-Li group showed more dental changes. 3. Growth changes of maxilla induced in the treatment group during wearing face mask were much more than those of normal group. 4. Growth changes of maxilla in the treatment group after treatment of face mask were less than those of normal group. From the obtained aata, it can be concluded that there was a stimulative effect on forward growth of maxilla during the use of face mask ; however, on removal of face mask, the stimulative effect was eliminated and undergrowth tendency of maxilla resumed.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.348-358
• /
• 2012

This study aims to prepare the basic data of the teeth color by measuring analyze mode using the color of the maxillary anterior teeth (maxillary central incisor, lateral incisor, canine) of the college students in their twenties as the dental colorimeter. The maxillary anterior teeth of the subjects of study as 467 students (male 89, female 378) were measured from 14 November to 2 December, 2011, so the color of total 1,401 teeth was examined, and oral health and eating habit attributes were researched. The survey results were as follows. 1. The color of maxillary anterior teeth was changed from maxillary central incisor to maxillary canine, brightness ($L^*$) was decreased $76.79{\pm}4.86$ to $69.72{\pm}4.62$, red chroma ($a^*$) was increased $2.02{\pm}2.00$ to $4.10{\pm}2.60$, yellow chroma ($b^*$) was increased $15.51{\pm}3.42$ to $20.10{\pm}3.46$. 2. Brightness ($L^*$) was different according to sex (p< 0.001), major (p<0.001), grade (p<0.001), smoking (p<0.001), oral health education (p<0.01), daily brushing frequency (p<0.001), brushing method (p<0.05), oral hygiene devices (p<0.001), and red chroma ($a^*$) to major (p<0.001), daily brushing frequency (p<0.05), brushing time after meals (p<0.01), oral hygiene devices (p<0.01), and yellow chroma ($b^*$) to brushing time after meals (p<0.01), subjective tooth color (p<0.001). 3. Brightness ($L^*$) of eating habit attributes was different according to coke, candy ($R^2=0.053$, p<0.05). In conclusion, this study demonstrates that the color of maxillary anterior teeth has differences in brightness ($L^*$), red chroma ($a^*$), yellow chroma ($b^*$) from each tooth, also these showed various tendency according to the oral health and eating habit attributes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.80-86
• /
• 2011

When a tooth adjacent to implant has coronal damages caused by severe dental caries or fracture, the clinical crown lengthening by forced eruption makes it possible to get esthetic restoration due to the prevention of alveolar crestal bone resorption and loss of interdental papilla. A 54-years-old male patient wanted prosthetic treatment because his anterior 3 unit bridges had fallen out. A right maxillary central incisor showed mild dental caries but a right maxillary canine lost most clinical crowns. Forced eruption combined with a gingival fiberotomy of a right maxillary canine was performed for 1 month after the dental implant had been simultaneously placed with bone grafts on a right maxillary lateral incisor. About 5 months after implant placement, 2nd surgical operation was performed. The provisional restorations were adjusted to make esthetic gingival contour for 8 weeks. The porcelain fused gold restorations were fabricated and set. The patient was satisfied with the final restorations in esthetic and functional aspect.