• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.390-393
• /
• 2010

The thermal decomposition rate of ammonium perchlorate with 3% of yellow iron oxide, FeOOH was found to be much faster than with red iron oxide, $Fe_2O_3$. By applying yellow and red iron oxide as a burning rate modifier to HTPB/AP propellant, burning rate of the HTPB/AP propellant with yellow iron oxide was shown to be 10 ~ 25% faster than with red iron oxide. There was no special difference in viscosity and hardness buildup of yellow and red oxide added HTPB/AP formulations.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1393-1406
• /
• 2018

In this study, three parameters (Pressure ($X_1$), Airflow rate ($X_2$), Operation time ($X_3$)) were experimentally designed and the predicted model and optimal conditions were established by using the terminal rise velocity of the microbubbles as the response value. The polynomial regression analysis showed that the optimum value for the terminal rise velocity at the Pressure ($X_1$) of 4.5 bar, Airflow rate ($X_2$) of 3.3 L/min and Operation time ($X_3$) of 2.2 min was 5.14 cm/min ($85.7{\mu}m/sec$). Also, the highest microbubble diameter size distribution in the range of 2 to $5{\mu}m$ and 25 to $50{\mu}m$ was confirmed by using a laser particle counting apparatus.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.901-906
• /
• 1998

Gas and liquid flow characteristics were investigated in an internal circulation airlift reactor using a single nozzle for a gas distributor. In three reactors with different diameters of the downcomer and heights of the riser, the gas holdup in the individual flow zone and the impulseresponse curve of tracer for an air-water system were measured for various gas velocities and reactor heights. Experimental results showed that the flow behavior of bubbles in the riser was the slug flow due to strong coalescences of bubbles and that the bubble flow pattern in the downcomer was the transition bubble flow for the smaller diameter of the downcomer, however, it was the homogeneous bubble flow for the larger one. And mean gas holdups in the individual flow zone and the reactor were greatly increased with decreasing the diameter of the downcomer for the equal ratio of height of the top section to that of the riser. Also, the mixing time was much effected by the height of the top section of reactor and for the equal ratio of height of top section to that of the riser, it was increased with increasing the diameter of the downcomer and the height of the riser. Flow characteristics of liquid were mainly varied with the bubble flow pattern in the downcomer and the size of the top section of reactor. And circulation velocities of liquid in the riser were increased with increasing gas velocities and the size of the top section of reactor, and for the equal ratio of height of top section to that of the riser, they were increased with increasing the diameter of the downcomer and the height of the riser.

• Horticultural Science & Technology
• /
• v.19 no.3
• /
• pp.367-372
• /
• 2001

'Kyoho' grape (Vitis labruscana L.) has currently cropped twice a year in plastic greenhouses. However, there are problems with low fruit quality in the second cropping owing to low temperatures and short photoperiods. This experiment was conducted to investigate the effect of root zone heating and $CO_2$ enrichment in plastic greenhouse on the vine growth and fruit quality of 'Kyoho' grape in double cropping system. The internode length of shoots, leaf area and leaf dry weight at the treatment of soil heating near root zone was significantly different regardless of $CO_2$ enrichment. There were no significant differences in fruit bunch and berry weight, titratable acidity, coloration degree and berry shattering among the treatments, but the soluble solids significantly increased by root zone heating. Photosynthetic rate increased with increasing $CO_2$ concentration from 300 to $800{\mu}mol{\cdot}mol^{-1}$ in sunny day, whereas it didn't increase in cloudy day regardless of $CO_2$ enrichment.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.489-490
• /
• 2019

본 연구에서는 태양광 벅 컨버터 제어기에 P&O 알고리즘을 이용하면서 MPPT 알고리즘의 추적 속도를 올리기 위한 최적 태양전지 전압 제어기 설계방법에 대해 제안한다. 제안된 제어기에서는 외부 루프의 MPPT 제어기의 수행 속도를 얼마나 빠르게 하는지에 대한 이론적인 방법을 제시하고 업데이트 주기를 0.1[sec] 이하로 줄이는 것을 목표로 전압제어기는 오버슈트가 업고, 빠른 상승시간을 갖도록 설계하여 MPPT 제어기의 추적 속도를 향상시키는 제어기법을 제안하고, 설계된 제어기 이득을 PSIM 시뮬레이션을 통해 제어기 성능을 검증한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.10
• /
• pp.927-934
• /
• 2011

Design parameter analysis is performed for a solar-powered UAV, storing potential energy by climb flight. Parameters related to the flight for saving potential energy, i.e. minimum & maximum altitudes for level flight, gliding & climbing angle, design point speed & altitude, gliding & climbing start time are investigated as design parameters. Weight and size of the UAV are determined using a weight model for the components of the solar-powered UAVs. Produced energy and consumed energy are calculated using these weight and size, yielding the required weight of the battery for a given mission. Relationship between the total weight of the UAV and each parameter is investigated. For the parameters listed above, there exist their ranges only where the design is possible. And there exist optimal values of these parameters minimizing the total weight.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.1029-1032
• /
• 2010

제주도의 강수량과 지하수위 상승의 관계와 비강수 때의 지하수위의 하강속도를 분석한 결과 제주도 동쪽 지역은 강우가 왔을 때 지하수위의 상승이 높지 않은데 비해 하강속도는 느리며 서쪽 지역은 강우에 의해 지하수위가 많이 상승하나 비가 오지 않으면 수위가 빨리 하강하였다. 제주도의 최대 함양 부피는 강수량이 가장 많았던 2007년 태풍 나리 때 $1.67{\times}10^{10}m^3$로 나타났다. 만약 현재 추산되고 있는 제주도의 함양률 46.1%를 적용한다면 이 때의 함양량은 $0.34{\times}10^9m^2$이며 공극률은 약 5% 정도가 될 것으로 추정된다. 지하수위의 변동은 강수량에 의해 좌우 되는데 2001-2009년간의 평균 변동폭은 5.53m이다. 변동 폭이 많이 오른 때는 대부분 태풍이 지나간 후이며 가장 높은 변동폭은 2007년 9월에 태풍 나리 후의 14.74m이다. 최저의 평균 상승폭이 1m도 되지 않은 경우가 있으며 이럴 경우 심각한 물부족 현상이 나타날 수 있을 것으로 보인다. 강수량과 지하수위 관계를 분석한 결과 지하수를 대규모로 사용할 필요가 있을 때는 동쪽보다 서쪽지역이 유리한 조건을 가지고 있으며, 지하수위 상승폭이 작고 지하수위가 급격하게 낮아질 경우 지하수 사용량을 제한할 필요가 있을 것으로 보인다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.6
• /
• pp.468-477
• /
• 2014

In this research, how a solar powered HALE (high altitude long endurance) UAV (Unmanned Aerial Vehicle) can climb and reach mission altitude, 18km, starting from the ground using only solar energy. A glider type aircraft was assumed as a baseline configuration which has wing area of $35.98m^2$ and aspect ratio of 25. Configuration parameters, lift and drag coefficients were calculated using OpenVSP and XFLR5 that are NASA open source programs, and climb flights were predicted through energy balance between available energy from solar power and energy necessary for a climb flight. Minimum time climb flight was obtained by minimizing flight velocities at each altitude and total time and total energy consumption to reach the mission altitude were predicted for different take off time. Also, aircraft moving distances due to westerly wind and flight speed were calculated.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.493-499
• /
• 2022

This paper reports the results of the eruption of a volcano on Jeju Island at a certain rate, and the tumulus formed after the eruption and the basalt that erupted from the middle of Mt. Halla washed up to the sea. We analyzed the speed when basalt underground magma breaks through the neutral zone on the ground with an absolute temperature of about 1000K and explodes at an absolute temperature of 1200K at an altitude of 1950m. The density of combustion gas becomes smaller than the surrounding air due to the plume volcanic eruption, which is the heat flow of the flame column due to buoyancy, and buoyancy is generated and an updraft is formed. Flame pillars are classified as continuous, intermittent, and buoyant flame zones. As the speed of the flame pillar of Mt. Halla (1950m) falls from the highest point it has risen, potential energy is converted into kinetic energy and is caused by the flow of fluid, solving these two equations equal, the volcanic eruption velocity is 87.5 m/s. At this time, the density of magma is inversely proportional to the temperature. Geomunoreum (456m) had an explosion speed of 42.6m/s.

• Journal of Nutrition and Health
• /
• v.21 no.4
• /
• pp.242-252
• /
• 1988

In vivo effects of leucine on skeletal muscle protein synthesis in fed and I-day food deprived young rats were examined. Animals assigned to leucine group were given a single i.p. injection of 80 or 160flmoles of leucine while control group animals were saline sham injected. The rate of protein synthesis was measured by the amount of $^{14}\textrm{C} incorporated into muscle protein after a single injection of $^{14}\textrm{C}-tyrosine, IO$\mu$ Ci/l00g B.W. Examined muscles were two different types of hind limb muscles. the oxidative solues and the glycolytic EDL and plantaris. Administered leucine elevated the concentration of free leucine in soleus muscles by 4-6.8 times the normal level. A massive dose of leucine, 160 flmoles, stimulated protein synthesis in the EDL and plantaris by 24 %, 29 % respectively of straved rats. The soleus of I-day food deprived rats and both types of muscles in fed rats did not respond to the injected leucine. The synthesis rate of the EDL and plantaris was supressed to one-half of the normal while the soleus that was not stimulated by leucine maintained a relatively normal rate, 78 %, of protein synthesis after I-day of food deprivation. Thus, in vivo stimulatory effect of leucine appears to be not a general phenomenon but to be related to the degree of catabolic condition developed by stress such as food deprivation. Although anabolic effects of leucine observed in this study was limited, any applicability of this special property of leucine to human subjects for the purpose of protein sparing in skeletal muscles remains to be examined.