• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.91-96
• /
• 2017

In this paper, we proposed a meander sleeve monopole antenna for low earth orbit satellite communications. The antenna has broadband property with the planar monopole and ground of meander sleeve. Monopole and ground conductors of the antenna are on the same plane, and exited through coaxial cable feeding. In order to confirm the property of antenna parameters, it was used a commercial software, HFSS, For the antenna fabrication, a FR4 dielectric substrate has a dielectric constant of 4.4 was used. The size of the antenna was $600mm{\times}20mm{\times}1.6mm$. Frequency band of the fabricated antenna was 130MHz~151MHz, and the bandwidth was 20MHz. Measurement results of the fabricated antenna, the return loss is more than -10dB return loss in the band could be obtained. Radiation pattern has a maximum gain of 2.64dBi value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1225-1232
• /
• 2009

In this paper, a parabolic edge planar monopole antenna for indoor DTV reception is presented. The antenna has broadband property with the planar monopole and ground of parabolic edges. It is designed close to self-complementary structure as changing curvature of edges of monopole and ground. Monopole and ground conductors of the antenna are on the same plane, and excited through CPW feeding. It is fabricated on an FR4 dielectric substrate of $\varepsilon_r=4.4$, and the dimension is $40\;mm{\times}200\;mm{\times}1.6\;mm$. Return loss is larger than 10 dB in 470~806 MHz. Maximum gain is 1.86 dBi on E-plane at 810 MHz and 3.86 dBi on H-plane at 600 MHz.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.1
• /
• pp.52-57
• /
• 2015

In this paper, we studies on the RF characteristics of the transmission line employing IPACD (inverted periodically arrayed capacitive devices) on MMIC (monolithic microwave integrated circuit) for application to wireless communication system. According to measured results, the novel transmission line employing IPACD showed a wavelength much shorter than conventional transmission lines. In addition, the IPACD structure showed an effective permittivity much higher than conventional ones. We also extracted the bandwidth characteristic of the IPACD structure using equivalent circuit analysis. According to the results, the cut-off frequency of the proposed structure was 129.2 GHz.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1345-1350
• /
• 2014

This paper presented analysis methods for adapting E-glass fiber/epoxy composite (GFRP) materials to an automotive leaf spring. It focused on the static behaviors of the leaf spring due to the material composition and its fiber orientation. The material properties of the GFRP composite were directly measured based on the ASTM standard test. A reverse implementation was performed to obtain the complete set of in-situ fiber and matrix properties from the ply test results. Next, the spring rates of the composite leaf spring were examined according to the variation of material parameters such as the fiber angles and resin contents of the composite material. Finally, progressive failure analysis was conducted to identify the initial failure load by means of an elastic stress analysis and specific damage criteria. As a result, it was found that damage first occurred along the edge of the leaf spring owing to the shear stresses.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.549-555
• /
• 2011

In this paper, inverted triangle structural planar monopole antenna with Edge for UWB Communication (3.1 ~ 10.6 GHz) is presented. The antenna have broadband property structurally through inverted triangle structural planar monopole which have edge. Monopole and ground of proposed antenna exist on coplanar plane, and excite as CPW. It used FR4 dielectric substrate of ${\epsilon}_r=4.4$, and the size is $20{\times}20{\times}1.6mm$. Return loss is more than - 10dB in 3.1 ~ 10.1 GHz (7.0 GHz). Radiation pattern is about the same that of dipole antenna at all frequency. At measured result, max gain is 8.44 dBi at E - plane.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.4
• /
• pp.55-63
• /
• 1987

Modified $PbTiO_3$ piezoelectric ceramics added with 0.2, 0.25, 0.3 mol of $CaCO_3$ and 0.04 mol of $(Co_{\frac{1}{2}}W_{\frac{1}{2}})$ and 0.05 mol of $MnO_2$ and NiO have been fabricated. These ceramics can be poled sufficiently within 10 minutes at $100^{\circ}C$ under about d.c. field of 40 kv/cm. Detailed measurement was performed on dielectric constants, cutie temperatures, elastic and piezoelectric properties and coupling factors for the fabricated ceramics. The most value of the piezoelectric coupling factors was coupling factor of thickness mode kt and its value for 0.25 mol of Ca was about $45\%$. Dielectric constants of $\varepsilon_{33}^T$ and $\varepsilon_{11}^T$ for 0.25 mol of Ca were 242 and 260, and coupling factor ratio (kt/Kp) and Qm were 6 and 357 respectively.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.186-190
• /
• 1994

The content of taxol and related compounds in various tissues of native yews( T. cuspidata var. latifolia) grown in 5 locations of Ullung Island were analyzed. A considerable range of vanation in the content was observed in the needle and bark collected from different trees located at the same area as well as at five different areas. Taxol content was much higher in the needle(0.017% on the dry weight basis) than those in the bark, whereas the content of 10-deacetyl baccatin III(10-DAB III) was slightly higher in the bark(0.073%), regardless of the location of the trees collected. Particuayly, the needle collected from the Hyunpo area, which located in North-west part of Ullung Island, contained the highest level of taxol(0.024%) exceeding the reported level in dried barks of Pacific yew and also somewhat higher level of its Precusor, 10-DAB III(0.049%). These results suggested that the needle of the yew at the Ullung Island could be suitable materials as a renewable source for the mass production of taxol.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.191-197
• /
• 2018

This paper details the development of an isotropic elastic-damage constitutive model for polymeric foam based on irreversible thermodynamics to consider the growth and coalescence of voids. The constitutive equations describe the material behavior sustaining unilateral damage. To facilitate finite element analysis, the material properties for specific types of polymeric foams are applied to the developed model; the model is then implemented in ABAQUS as a user-defined material subroutine. To validate the developed damage model, the simulated results are compared to the results of a series of tensile tests on various polymeric foams. The proposed damage model can be utilized to further research on continuum damage mechanics and finite element analysis of polymeric foams in computational engineering.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.2
• /
• pp.95-107
• /
• 2014

In general, topographical phenomena are represented graphically by data in the spatial domain, while attributes of the non-spatial domain are expressed by alpha-numeric texts. GIS functions for analysis of attributes in the non-spatial domain remain quite simple, such as search methods and simple statistical analysis. Recently, graph modeling and network analysis of social phenomena are commonly used for understanding various social events and phenomena. In this study, we applied the network analysis functions to the non-spatial domain data of GIS to enhance the overall spatial analysis. For this purpose, a novel design was presented to integrate the spatial database and the graph database, and this design was then implemented into a WebGIS system for better decision makings. The developed WebGIS with underlying synchronized databases, was tested in a simulated application about the selection of water supply households during an epidemic of the foot-and-mouse disease. The results of this test indicate that the developed WebGIS can contribute to improved decisions by taking into account the social proximity factors as well as geospatial factors.

• Korean Journal of Materials Research
• /
• v.5 no.6
• /
• pp.715-722
• /
• 1995

Vinylbenzyl triphenyl phosphonium chloride (VTPC) was prepared for the humid membrane. The humidity sensitive memo)lane was composed of copolymers, which have differnet content of VTPC and styrene (VTPC : ST=1 : 0.7 : 3, 5 : 5, 3 : 7). The changes in electrical properties of copolymers with relative humidity were measured. It was found that the impedance decreased with an increase of the content of VTPC in the humid membrane, and the Impedance also decreased with an increase of thickness of humid membrane. The copolymer derived from same equip of VTPC and ST showed 12M$\Omega$-100M$\Omega$ at 70%RH-90%RH, which was required for the current humidity sensor operating at high humidity or dew point. The temperature dependence coefficient at a temperature range 15$^{\circ}C$∼35$^{\circ}C$ was found to be -0.5%RH/$^{\circ}C$ and the hysterisis fabled within the range ${\pm}$2%RH. The response time was found to be 40seconds for varing relative humidity from 75% RH to 95%RH and vice versa.