• 제목/요약/키워드: 상보필터

검색결과 36건 처리시간 0.054초

H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 (Permittivity Characteristic Analysis of Planar Substrates Using H-shaped Resonant Aperture)

  • 여준호;이종익
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.55-56
    • /
    • 2018
  • 본 논문에서는 H-모양 공진 개구를 이용한 평면 기판의 유전율 특성 분석 방법을 제안하였다. 이를 위해 마이크로스트립 전송선로의 접지면에 H-모양 공진 개구를 추가하여 대역 저지 필터를 생성하였다. 마이크로스트립 전송선로의 접지면 뒤에 2 mm 두께의 평면 기판을 놓고 기판의 유전율 변화에 따른 공진주파수의 변화를 조사하였다. 기존의 상보 분할 링 공진기 구조를 사용하였을 때와 비교하여 기준 공진주파수에 대한 주파수의 변화 비가 커짐을 알 수 있었다.

  • PDF

영상의 방향성을 이용한 ROI 기반 실시간 파노라마 영상 정합 (ROI Based Real Time Image Stitching Using the Directionality of the Image)

  • 남기훈;최세진
    • 전기전자학회논문지
    • /
    • 제20권4호
    • /
    • pp.420-423
    • /
    • 2016
  • 본 논문은 임베디드 환경에서 실시간으로 동작하기 위해 입력 영상의 방향성을 판단하여 ROI를 지정하고 SURF, PROSAC 알고리즘을 적용하는 파노라마 영상 정합 방법을 제안한다. 기존의 파노라마 정합 알고리즘은 SURF 알고리즘이나 SIFT 알고리즘과 같이 많은 연산 데이터가 사용되는 알고리즘을 영상 전체에 적용하여 연산하기 때문에 불필요한 연산 영역을 포함하고 있다. 따라서 본 논문은 입력되는 영상의 방향을 판단한 결과로 영상의 ROI를 지정하여 불필요한 연산을 줄이는 방법을 제안한다. 영상의 방향을 판단하는데 사용하는 센서는 자이로 센서와 가속도 센서를 사용한다. 임베디드 환경에서 자이로 센서와 가속도 센서의 상보 필터를 통한 값 보정은 영상 정합 알고리즘의 처리 시간에 영향을 주지 않기 때문에 실시간 동작이 가능하다.

IMU-바로미터 기반의 수직변위 추정용 이단계 칼만/상보 필터 (A Two-step Kalman/Complementary Filter for Estimation of Vertical Position Using an IMU-Barometer System)

  • 이정근
    • 센서학회지
    • /
    • 제25권3호
    • /
    • pp.202-207
    • /
    • 2016
  • Estimation of vertical position is critical in applications of sports science and fall detection and also controls of unmanned aerial vehicles and motor boats. Due to low accuracy of GPS(global positioning system) in the vertical direction, the integration of IMU(inertial measurement unit) with the GPS is not suitable for the vertical position estimation. This paper investigates an IMU-barometer integration for estimation of vertical position (as well as vertical velocity). In particular, a new two-step Kalman/complementary filter is proposed for accurate and efficient estimation using 6-axis IMU and barometer signals. The two-step filter is composed of (i) a Kalman filter that estimates vertical acceleration via tilt orientation of the sensor using the IMU signals and (ii) a complementary filter that estimates vertical position using the barometer signal and the vertical acceleration from the first step. The estimation performance was evaluated against a reference optical motion capture system. In the experimental results, the averaged estimation error of the proposed method was 19.7 cm while that of the raw barometer signal was 43.4 cm.

자율주행 차량 제어를 위한 다중 주기 센서 기반의 상보 필터 동기 융합 (Synchronous Interfusion of the Compensatory Filters Based on Multi-rate Sensors for the Control of the Autonomous Vehicle)

  • 박정현;이광희;이철희
    • 한국자동차공학회논문집
    • /
    • 제22권3호
    • /
    • pp.220-227
    • /
    • 2014
  • This paper presents about multi-rate sensors' synchronization and filter fusion via a sigmoid function of the Kalman filter. To synchronize multi-rate sensors, the estimation states of the Kalman filter is modified. A specific matrix that makes the filter choose sensor values only updated is multiplied to measurement matrix. For the filter that has weak points on some criteria, filter fusion is suggested by using sigmoid function. Modified kalman filter is tested with practical case. A sigmoid function was designed for the test and the performance of the modified function is estimated with respect to conventional Kalman filter. Unscented Kalman filter is used to the base filter of the suggested filter because of its stability.

6축 모션 플랫폼을 이용한 비행 시뮬레이터 구현 (Implementation of Flight simulator using 6DOF Motion Platform)

  • 박명철;강민경;박혜민;임혜진;박현경;조준혁;권영희
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
    • /
    • pp.11-12
    • /
    • 2017
  • 본 논문에서는 항공기 비행 자세를 직관적으로 이해하고 동작의 원리를 시각화 할 수 있는 비행 자세 시뮬레이터를 구현하였다. 항적 정보의 변화에 따라 6축 모션 플랫폼을 동작시키고, 자이로 센서로 부터 전달 받은 비행 자세를 시뮬레이터에 전달하여 시스템을 구성한다. 항공기의 자세를 분석하기 위하여 자이로 센서와 가속도 센서를 같이 사용하는데 자이로 센서는 적분과정의 누적오차가 발생하고 가속도 센서는 짧은 순간의 진동에 따른 노이즈가 심하여 상보 필터를 이용한 보정작업을 하였다. 산출된 센서 정보를 이용하여 6축 모터에 전달할 각도를 계산하여 모션 플랫폼을 동작시키게 되며 시각화 결과는 OpenGL을 이용하여 구현하였다. 본 연구의 결과는 향후, 항공관련 학생들의 교육 기자재로 활용될 수 있을 것으로 사료된다.

  • PDF

도립진자 시스템의 $H_{\infty}$ 제어기 설계 (Design of $H_{\infty}$Controller for the inverted pendulum system)

  • 서강면;강문성
    • 한국정보통신학회논문지
    • /
    • 제10권10호
    • /
    • pp.1796-1803
    • /
    • 2006
  • 본 연구에서는 비선형성이 강한 대표적인 불안정한 시스템으로 새로운 제어 이론의 유효성을 실증하고 평가하기에 적합한 도립 진자 시스템의 강인 안정 및 강인 제어 성능을 확보하기 위하여 $H_{\infty}$ 제어 이론을 도입하여 최적 제어기를 설계하였다. 그리고, 저역통과 필터를 제어 대상 시스템과 종속으로 결합시켜 개루프 전달함수의 형성(loop shaping)을 시도함으로서, 감도함수 및 상보감도함수가 바람직 한 주파수 특성을 갖도록 하였다. 먼저, 설계한 $H_{\infty}$제어기를 도립진자 제어시스템에 적용하여 시뮬레이션 하였고, 그 결과를 전통적인 기법으로 산업현장에서 널리 사용하고 있는 PID제어기를 채용한 시스템의 출력과 비교하여 그 가능성을 확인하였다. 그런 다음, 설계 한 제어기를 실제 시스템에 적용하여 실험하였다. 시뮬레이션 및 실험 결과를 통해, $H_{\infty}$ 제어기는 모델링 오차, 외란 및 노이즈의 영향을 줄이면서 제어목표를 잘 추종하는 것으로 나타나 안정도 및 제어성능이 우수함을 확인할 수 있었다.