• KIEAE Journal
• /
• v.17 no.3
• /
• pp.107-112
• /
• 2017

Purpose: Both silica gel and activated carbon black particles were adopted for use as PCM absorbed porous media applicable as construction materials. To investigate usable methods for absorbing PCM into the media, they were soaked into PCM and also tested for enhancement of PCM absorption into them. Method: To test PCM absorption into some porous media such as both ${\varphi}1{\sim}2mm$ and $10{\mu}m$ silica gels, and $50{\mu}m$ activated carbon black, $43^{\circ}C$ PCM was used as a laten heat material. The method, soaking into PCM was applied to this study, and the media were moderately rotated by centrifuge to have the extra PCM flow out. DSC analysis was conducted to investigate the melting and solidifying of the PCM absorbed into the porous media. Result: It was found that PCM was absorbed into the porous media by over 85 wt% of all particles. In addition, it was noted that the ultrasonic vibrator was accelerating the PCM absorption into the particles to three times higher speed than simple soaking. Centrifuge was adopted to remove extra PCM sticking on the particle surfaces and extra PCM was moderately removed from the surfaces of the particles. DSC analysis indicated that the latent heat of the absorbed PCM particles was 160 J/g, and the melting temperature was approximately $40^{\circ}C{\sim}50^{\circ}C$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.24-29
• /
• 2013

An automotive cooling system is designed sufficiently large enough to endure the excessive heat load. In general driving condition, the cooling systems are too large to operate optimally. An experimental study was performed to evaluate a novel automotive cooling strategy using the latent heat of a phase change material (PCM). The strategy is expected to reduce the cooling system size up to around 35% and the engine warm-up time around 60%. The strategy will help improve fuel economy and emissions characteristics of vehicles as a result of reduced total body weight and shortened engine warm-up time by a smaller radiator, as well as more stable combustion mode due to constantly maintained coolant temperature.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.2
• /
• pp.10-15
• /
• 2010

The experimental study was conducted to optimize the system dissipating properly heat from the in-situ solar panel installed on the roof. For this purpose, six 12-Watt panels, which were consisted of the different design conditions such as containing phase change material(PCM), changing the array of the aluminum fin and honeycomb at the back of the panel, were tested. PCM, which had $44^{\circ}C$ melting point, was chosen in this study. In order to enhance absorbing and expelling heatin PCM, profiled aluminum fin was placed either inward oroutward from the panel. Furthermore, Aluminum honeycomb is imbedded in the back container to find if it would improve the thermal conductivity of PCM. During the experiment, there were ranged to $26^{\circ}C\sim32^{\circ}C$ for outdoor temperature and $700W/m^2\sim1000W/m^2$ for irradiance. As a result, the solar panel, combined with honeycomb and outward fins with PCM instead of placing the fins inward, is showing the best performance in terms of controling panel temperature and its efficiency.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.38-41
• /
• 1994

막분리(membrane separation)법은 막 전후의 압력차, 농도차 등을 추진력(driving foroe)으로 하여 분리대상물질에 대한 막의 선택투과성 차이를 이용, 분리를 행하는 것이다. 이 분리법은 기존의 분리공정인 심냉법(cryogenic separation)과는 달리 상변환 공정이 필요없어 에너지가 적게 들고 또한 PSA(pressure swing adsorption)법에서와 같은 cycle 운전이 필요없어 연속적으로 분리가 가능하며 시스템도 간단하다. 최근 기체 막분리의 경우 수소 및 탄산가스의 회수정제, 공기중의 산소와 질소의 분리 등에 실용화되고 있다. 여기서는 공기중의 산소를 분리하여 30-40% 산소부화공기(oxygen enriched air)를 간편하게 제조할 수 있는 산소부화막장치와 연소장치에의 응용기술 및 연구결과에 대해 간략히 소개하고자 한다.

• Polymer(Korea)
• /
• v.29 no.1
• /
• pp.8-13
• /
• 2005

Polystyrene (PS) particles containing the phase change material (PCM) were synthesized by miniemulsion polymerization. The polymer particles prepared with different parameters were investigated in terms of average particle size, particle distribution, and latent heat storage of encapsulated paraffin wax (PW) as PCM. The morphology and particle features of PS particles were analyzed by scanning electron microscope and particle size analyzer, respectively. As a result, the diameters of PS particles were adjusted with manufacturing conditions. The stable and spherical PS particles of nanosize were obtained by miniemulsion polymerization, which could be attributed to the prevention of Ostwald ripening by cosurfactant. Thermal properties of PS particle containing PCM were studied by differential scanning calorimetry. From DSC freeze-thaw cycle, PCM coated with PS exhibited the thermal energy storage and release behaviors, and the latent heat was found to be a maximum 145 J/g. It was noted that PS particles containing PCM showed a good potential as a thermal energy storage medium.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.87-90
• /
• 1998

1. 서론 : 막 분리공정에 사용되고 있는 대부분의 고분자 막들은 침지침강(immersion precipitation) 상변환법에 의해 제조되고 있다. 침지침강 상변환법으로 제조된 막의 최종 구조는 고분자 캐스팅 용액의 열역학적 특성과 비용매와의 속도론적 특성에 따라 대칭형 또는 비대칭형 막구조를 갖게 된다. 고분자/용매로 이루어진 캐스팅 용액에 제3의 성분으로서 PVP, PEG, LiCl. ZnCl$_2$ 와 같은 유.무기물을 첨가시킴으로서 막구조 및 투과성능을 변화시킬 수 있다. 이러한 점에서 이들 첨가제를 pore-forming agent라 부르기도 한다. 본 연구에서는 상대적으로 열적.기계적 특성이 우수하고, 화학약품에 대한 안정성이 뛰어나 상변환 막의 소재물질로서 널리 사용되고 있는 Polyethersulfone(PES)을 막 소재 물질로 사용하여 PES/NMP 캐스팅 용액에 다양한 종류의 무기염[CaCl$_2$, LiCl, LiClO$_4$, Mg(ClO$_4)_2$, ZnCl$_2$]을 PES에 대한 중량비를 달리하여 첨가시켜 비대칭 막을 제조하여 무기염의 첨가가 막구조 형성 및 막투과 특성에 미치는 영향을 연구하였다. 이때 첨가된 무기염 및 첨가 중량비에 따른 영향을 PES/NMP/Salt 계의 coagulation value, light transmittance, 점도 등의 열역학 및 속도론적 특성으로서 설명하였다.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.15-21
• /
• 2013

Encapsulation of a paraffin wax core as a phase change material with polystyrene shell and the its thermal characteristics caused by the encapsulation were studied. For the nanoencapsulation, the miniemulsion polymerization method was selected. The factors affecting the thermal properties of prepared nanocapsule particles of phase change material were analysed in aspect of the structure of crosslinking agents, amounts of surfactant, ratio of paraffin wax to monomer, and hydrophilicity of initiators. It was assumed that Oswald ripening plays the most important role in the changes of particle size, particle morphology, and thermal capacity of nanocapsule core. It was elucidated that the thermal capacity was also dependent on the hydrophilicity and crosslinking density of polystyrene shell components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.536-542
• /
• 2018

Tin dioxide, $SnO_2$, is a well-known n-type semiconductor that shows change in resistance in the presence of gas molecules, such as $H_2$, CO, and $CO_2$. Considerable research has been done on $SnO_2$ semiconductors for gas sensor applications due to their noble property. The nanomaterials exhibit a high surface to volume ratio, which means it has an advantage in the sensing of gas molecules. In this study, SnO nanoplatelets were grown densely on Si substrates using a thermal CVD process. The SnO nanostructures grown by the vapor transport method were post annealed to a $SnO_2$ phase by thermal CVD in an oxygen atmosphere at $830^{\circ}C$ and $1030^{\circ}C$. The pressure of the furnace chamber was maintained at 4.2 Torr. The crystallographic properties of the post-annealed SnO nanostructures were investigated by Raman spectroscopy and XRD. The change in morphology was confirmed by scanning electron microscopy. As a result, the SnO nanostructures were transformed to a $SnO_2$ phase by a post-annealing process.