• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.458-467
• /
• 2001

Optimistic Two-Phase Locking(O2PL) performs as well as or better than the other approaches because it exploits client caching well and also has relatively lower network bandwidth requirements. However, O2PL leads to unnecessary waits, because, it can not be commit a transaction until the transaction obtains all requested locks. In addition, Optimistic Concurrency Control(OCC) tends to make needless aborts. This paper suggests an efficient optimistic cache consistency protocol that overcomes such shortcomings. Our scheme decides whether to commit or abort a transaction without wait and it adopts transaction re-ordering in order to minimize the abort rate. Our scheme needs only one version for each data item in spite of the re-ordering mechanism used. Finally, this paper presents a simulation-based analysis that shows superiority in performance of out scheme to O2PL and OCC.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.118-123
• /
• 2008

There are many facilities, such as facilities for high pressure gas storage and systems related to high pressure pipes, to handle hazardous materials in energy industries. Because the foundation of the proper risk analysis and management system has not been established, there is the possibility of an accident and Korea has met higher accident rate than developed countries. These accidents in energy facilities could cause great damage to facilities including the surrounding area, We have conducted the present research in order to systematize the emergency response system (ERS) using a lot of information on the degree of damage in an accident by consequence analysis.

• Composites Research
• /
• v.36 no.6
• /
• pp.422-428
• /
• 2023

The electrical contact resistance between the bipolar plate (BP) and the carbon felt electrode (CFE), which are in contact by the stack clamping pressure, has a great impact on the stack efficiency because of the relatively low clamping pressure of the vanadium redox flow battery (VRFB) stack. In this study, a polyethylene (PE) composite-CFE hybrid bipolar plate structure is developed through a local heat welding process to reduce such contact resistance and improve cell performance. The PE matrix of the carbon fiber composite BP is locally melted to create a direct contact structure between the carbon fibers of CFE and the carbon fibers of BP, thereby reducing the electrical contact resistance. Area specific resistance (ASR) and gas permeability are measured to evaluate the performance of the PE composite-CFE hybrid bipolar plate. In addition, an acid aging test is performed to measure stack reliability. Finally, a VFRB unit cell charge/discharge test is performed to compare and analyze the performance of the developed PE composite-CFE hybrid BP and the conventional BP.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.607-618
• /
• 2015

Five years have passed since the first set of environmental samples was taken in 2011 to represent various ecosystems which would help future generations lead back to the past environment. Those samples have been preserved cryogenically in the National Environmental Specimen Bank(NESB) at the National Institute of Environmental Research. Even though there is a strict regulation (SOP, standard operating procedure) that rules over the whole sampling procedure to ensure each sample to represent the sampling area, it has not been put to the test for the validation. The question needs to be answered to clear any doubts on the representativeness and the quality of the samples. In order to address the question and ensure the sampling practice set in the SOP, many steps to the measurement of the sample, that is, from sampling in the field and the chemical analysis in the lab are broken down to evaluate the uncertainty at each level. Of the 8 species currently taken for the cryogenic preservation in the NESB, pine tree samples from two different sites were selected for this study. Duplicate samples were taken from each site according to the sampling protocol followed by the duplicate analyses which were carried out for each discrete sample. The uncertainties were evaluated by Robust ANOVA; two levels of uncertainty, one is the uncertainty from the sampling practice, and the other from the analytical process, were then compiled to give the measurement uncertainty on a measured concentration of the measurand. As a result, it was confirmed that it is the sampling practice not the analytical process that accounts for the most of the measurement uncertainty. Based on the top-down approach for the measurement uncertainty, the efficient way to ensure the representativeness of the sample was to increase the quantity of each discrete sample for the making of a composite sample, than to increase the number of the discrete samples across the site. Furthermore, the cost-effective approach to enhance the confidence level on the measurement can be expected from the efforts to lower the sampling uncertainty, not the analytical uncertainty. To test the representativeness of a composite sample of a sampling area, the variance within the site should be less than the difference from duplicate sampling. For that, a criterion, ${i.e.s^2}_{geochem}$(across the site variance) <${s^2}_{samp}$(variance at the sampling location) was proposed. In light of the criterion, the two representative samples for the two study areas passed the requirement. In contrast, whenever the variance of among the sampling locations (i.e. across the site) is larger than the sampling variance, more sampling increments need to be added within the sampling area until the requirement for the representativeness is achieved.

• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.65-72
• /
• 2014

Biochar (BC) from biomass pyrolysis is a carbonaceous material that has been used to remove various contaminants in the environment. The eliminatory action for burcucumber (Sicyos angulatus L.) as an invasive plant is being consistently carried out because of its harmfulness and ecosystem disturbance. In this study, burcucumber biomass was converted into BCs at different pyrolysis temperatures of 300 and $700^{\circ}C$ under a limited oxygen condition. Produced BCs were characterized and investigated to ensure its efficiency on antibiotics' removal in water. The adsorption experiment was performed using two different types of antibiotics, tetracycline (TC) and sulfamethazine (SMZ). For the BC pyrolyzed at a high temperature ($700^{\circ}C$), the values of pH, electrical conductivity, and the contents of ash and carbon increased whereas the yield, mobile matter, molar ratios of H/C and O/C, and functional groups decreased. Results showed that the efficiency of BCs on antibiotics' removal increased as pyrolysis temperature increased from 300 to $700^{\circ}C$ (38 to 99% for TC and 6 to 35% for SMZ). The reaction of ${\pi}-{\pi}$ EDA (electron-donor-acceptor) might be involved in antibiotics' adsorption to BCs. BC has potential to be a superior antibiotics' adsorbent with environmental benefit by recycling of waste/invasive biomass.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.60-75
• /
• 2019

Nowadays, interest in safety of pedestrians who are relatively weak when compared with vehicles increases. Also, concern for pedestrian accidents on crosswalks increases. For these reasons, scrambled crosswalks which are considered to contribute pedestrian safety by reducing conflicts between vehicles and pedestrians are actively discussed and there are also a few intersections where they are actually installed. However, scrambled crosswalks must include all-red phase for all vehicle traffic flows, which inevitably leads to increase of lost time per cycle. Therefore, evaluation in terms of efficiency should be done before installation of scrambled crosswalks. This research suggests installation criteria for scrambled crosswalks so that it is possible to judge whether installation of scrambled crosswalks is appropriate only by surveying vehicle traffic volume and pedestrian traffic volume. This research derives optimum cycle length from signal optimization models which considers both vehicle traffic volume and pedestrian traffic volume. From this optimum cycle length, this research compares total delay time before and after installation of scrambled crosswalks. From an analysis, two research results are derived. Firstly, there is critical traffic volume above which installation of scrambled crosswalks can not efficient. Secondly, appropriate areas for installation of scrambled crosswalks are different by each signal intersection or by each signal system and those difference vary. From these results, this research suggests installation criteria for scrambled crosswalks which consists of two steps. The delay time of the pedestrians may be increased after the diagonal crosswalk is installed, but it may be desirable to install in consideration of the appropriate traffic level to ensure safety.

• Journal of the Korean School Mathematics Society
• /
• v.21 no.4
• /
• pp.419-443
• /
• 2018

The purpose of this study was to analyze the problem solving strategies of ordinary students, gifted students, pre-service teachers, and in-service teachers with the 'chicken and pig problem,' which has multiple strategies to obtain the solution. For this study, 98 students in the 6th grade elementary schools, 96 gifted students in a gifted institution, 72 pre-service teachers, and 60 in-service teachers were selected. The researcher presented the "chicken and pig" problem and requested them the solution strategies as many as possible for 30 minutes in a free atmosphere. As a result of the study, the gifted students used relatively various and efficient strategies compared to the ordinary students, and there was a difference in the most used strategies among the groups. In addition, the percentage of respondents who suggested four or more strategies was 1% for the ordinary students, 54% for the gifted students, 42% for the pre-service teachers, and 43% for the in-service teachers. As suggestions, the researcher asserted that various kinds of high-quality mathematical problems and solving experiences should be provided to students and teachers and have students develop multi-strategy problems. As a follow-up study, the researcher suggested that multi-strategy mathematical problems should be applied to classroom teaching in a collaborative learning environment and reflected them in teacher training program.

• Geotechnical Engineering
• /
• v.14 no.3
• /
• pp.73-94
• /
• 1998

In the present study, a method of the three-dimensional limit equilibrium stability analysis of shape of the potential failure wedge for the concave-shaped excavation corner is assumed on the basis of the results of the FLACSU program analysis. Estimation of the three-dimensional seepage forces expected to act on the failure wedge is made by solving the three-dimensional continuity equation of flow with appropriate boundary conditions. By using the proposed method of three-dimensional stability analysis of the concave-shaped excavation corner, a parametric study is performed to examine the reinforcement effect of skew soil nailing system, range of the efficient skew angles and seepage effect on the overall stability. Also examined is the effect of an existence of the right-angled excavation corner on three-dimensional deflection behaviors of the convex-shaped skew soil nailing walls. The results of analyses of the convexshaped excavation corner with skew soil nailing system is further included to illustrate the effects of various design parameters for typical patterns of skew nails reinforcement system.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.233-247
• /
• 2016

Local food industry has been spreading all over the world. Korea is also actively applying and developing local food industry. However, relatively high distribution cost in Korean agricultural market is hindering its further growth. Distribution cost has close relation with shipping distance. Raised distribution cost brings major impacts not only on quality and price of products but also on greenhouse gas(carbon dioxide) emissions. Therefore, it is necessary to find a solution for inefficient distribution system of the local food industry to reduce overall cost and greenhouse gas. In this study, we present a location selection model for local food regional center using Analytic Hierarchy Process. The location of local food regional hub center is decided based on expert opinions on five factors: accessibility, quality, population, size of area, and shipping distance. The relative importance of the five factors has been concluded as follows: quality (0.430) ${\gg}$ population (0.262) ${\gg}$ travel distance (0.201) ${\gg}$ accessibility (0.075) ${\gg}$ and area (0.033). We apply and analyze the environmental management system model for Local food industry to develop the regional hub center site selection criteria and to analyze the effects of greenhouse gas emissions in the local food industry. This study, by applying and analyzing the environmental management system of the local food industry, is believed to be a valuable asset for managing greenhouse gas emission in the local food industry. Also, the data will be used for the autonomous local food industry's direct sales stall management. Eventually, this study will contribute so greatly to the local food industry's competitiveness that even large distribution companies will give way for the local food industry.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.259-281
• /
• 2018

Advocates of mandatory IFRS adoption claim that IFRS increase financial statement comparability, which in turn leads to greater cross-border investment(Securities and Exchange Commision, 2008). The notion is that improved financial statement comparability reduces the information acquisition costs of global investors and thereby increase their investment in foreign firms. The purpose of this study is to examine this assertion by examining whether the K-IFRS adoption rusults in improved comparability that leads to increased investment by foreign investment. We also examined whether the relation between comparability and foreign investment has strengthen after adoption of K-IFRS. To achieve the purpose of our study, we measure Korean firms comparability using stock price model, stock return model and cash flow from operation model by Barth et al.(2012). We use both foreign ownership in the end of year and average during the year for dependent variables were to reduce bias. We test our hypothesis using 1,817 firm-year observation of KOSPI firms during the period of our analysis, 2011-2015. Consistent with our hypothesis, we find K-IFRS adoption results in a greater increase in foreign investment in firms with high comparability firms. This result indicate that the adoption of K-IFRS intends to achieve the international accounting convergence as stated in the roadmap and to reduce the Korea Discount.