• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1074-1082
• /
• 2002

Nanocomposite PMN-PT-BT/Ag/MgO was prepared by sintering at $950{\circ}C$ with addition of $AgNO_3$ and MgO sol to the PMN-PT-BT powder sinterable at $1200{\circ}C$. The low-temperature-sinterable PMN-PT-BT/Ag powder prepared by the modified mixed oxide method was calcined at $600{\circ}C$ for 1h and surface modified with the MgO sol of 0-10 wt% and then subjected to consolidation at $850-950{\circ}C$ for 4h under a flowing oxygen. The nanocomposite PMN-PT-BT/Ag/MgO(0.5wt%) sintered at $950{\circ}C$ showed the microstructure with grains of $1-3{\mu}m$, the second phase of MgO of $0.1-0.3{\mu}m$ by SEM and Ag of << $1{\mu}m$ qualitatively by SIMS. It showed the sintered relative density of 99%, the room temperature dielectric constant of 17200, the dielectric loss of 2.1% and the specific resistivity of $5.46{\times}10^{12}{\Omega}{\cdot}cm$. But the PMN-PT-BT/Ag/MgO(0 wt%) nanocomposite sintered at $950{\circ}C$ showed a little better properties : the sintered relative density of 99.5%, the room temperature dielectric constant of 19500, the dielectric loss of 2.1% and the specific resistivity of $7.30{\times}10^{12}{\Omega}{\cdot}cm$.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.106-113
• /
• 2010

Fire characteristics can be analyzed more realistically by using more accurate material properties related to the fire dynamics and one way to acquire these fire properties is to use one of the inverse property analyses. In this study the genetic algorithm which is frequently applied for the inverse heat transfer problems is selected to demonstrate the procedure of obtaining fire properties of the solid charring material with relatively simple chemical structure. The thermal decomposition on the surface of the test plate is occurred by receiving the radiative energy from external heat sources, and in this process the heat transfer through the test plate can be simplified by an unsteady 1-D problem. The inverse property analysis based on the genetic algorithm is then applied for the estimation of the properties related to the reaction pyrolysis. The input parameters for the analysis are the surface temperature and mass loss rate of the char plate which are determined from the unsteady 1-D analysis with a givenset of 8 properties. The estimated properties using the inverse analysis based on the genetic algorithm show acceptable agreements with the input properties used to obtain the surface temperature and mass loss rate with errors between 1.8% for the specific heat of the virgin material and 151% for the specific heat of the charred material.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.384-384
• /
• 2009

최근 태양전지 개발이 본격화 되면서 태양전지 웨이퍼 표면에서의 재결합에 의한 손실을 줄이고 반사도를 감소시키기 위한 ARC 개발이 활발히 진행되고 있다. 이를 위해 널리 사용하는 ARC 물질로 수소화된 실리콘 질화막이 있다. 수소화된 실리콘 질화막은 PECVD 법으로 저온에서 실리콘 기판 위에 증착 가능한 장점이 있다. 또한 실리콘 질화막의 광학적, 전기적인 특성은 화학적 조성비에 의해 결정되며 증착온도 가변에 따라 균일도 및 굴절률 조절을 가능케 하여 태양전지의 효율을 향상 시킬 수 있다. 따라서 본 연구에서는 수소화된 실리콘 질화막을 태양전지에 적용하기 위해 질소 가스 분위기에서 PECVD를 이용하여 증착하고 그 특성을 분석하였다. 박막은 0.8 Torr의 압력에서 $150^{\circ}C{\sim}450^{\circ}C$의 기판 온도로 증착되었으며 이때의 RF power은 100W ~ 300W로 가변 하였다. 증착된 박막은 1.94 에서 2.23의 폭넓은 굴절률 값을 가지고 있었다. $SiH_4/NH_3$ 가스 비의 증가에 따라 박막 두께와 굴절률이 감소함을 확인 할 수 있었다. 이는 $NH_3$ 가스의 상대적인 증가에 따라 Si 생성을 선행하는 $SiH_4$ 가스의 부분압이 제한되기 때문이고, 이러한 결과로 박막내에 질소 원자가 증가함에 따라 N-H 결합이 증가하여 n-rich인 박막 상태가 되기 때문으로 분석된다. 증착된 실리콘 질화막의 소수반송자 수명 측정 결과 굴절률 2.23인 박막의 경우 약 87 us의 수명을 나타냈으며, 굴절률이 1.94로 줄어듦에 따라 소수반송자 수명 역시 79 us로 감소하였다. 수소화된 실리콘 질화막은 n-rich 보다 Si-rich 인 경우 effective 반송자 수명을 증가시켜 표면 재결합 속도를 줄이는데 유용함을 확인하였다. 또한 증착온도가 증가할수록, RF power가 증가 할수록 소수반송자 수명 역시 증가하였다. 반사도의 경우 $SiH_4$의 비율이 증가할수록 반사도가 감소함을 확인 하였으며, 증착온도 증가에 따라, RF power 증가에 따라 반사도가 감소하였다. 결과적으로 $450^{\circ}C$의 기판온도와 300W의 RF power에서 증착된 실리콘 질화막의 경우 가장 우수한 전기적, 광학적 특성을 보여주었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.2
• /
• pp.95-103
• /
• 2018

As a guideline for desulfurization and dehumidification pretreatment facility for optimizing utilization of biogas, the $H_2S$ concentration is set at 150 % which can be treated with iron salts, dehumidification is the optimum value for generator operation, and the relative humidity applied at the utilization of biogas in EU is set at 60 %. We have set up the generator facility guidelines to optimize utilization of biogas. The appropriate amount of biogas should be at least 90 % of the total gas generation, and the capacity of generator facility should be set at 20~30 %. In order to equalize the pressure of the incoming gas the generator, a gas equalization tank should be installed and the generator room average temperature should be kept at $45^{\circ}C$ or less. Since the gas is not produced at a certain methane concentration in the digester, the efficiency is lowered. Therefore, it is required to install an air fuel ratio control system according to the change in methane concentration. Therefore, it is necessary to compensate for the disadvantages of biogasification facilities of organic waste resources and optimize utilization of biogas and improve operation of facilities. This study was conducted to optimize biogas utilization of type of organic waste(containing sewage sludge and food waste, animal manure), investigate the facilities problem and propose design, operation guidelines such as pre-treatment facilities and generators.

• Microbiology and Biotechnology Letters
• /
• v.12 no.4
• /
• pp.299-304
• /
• 1984

Saprophytic microorganisms of onion bulbs in Korea were confirmed, and effects of temperature, humidity and fumigation by Tetrachloro isophthalonitrile on Botrytis-rot were investigated in order to decrease storage loss of onions. Dominant saprophytes were Botrytis, Penicillium and Fusarium as molds which were all pathogens, and Erwinia and Pseudomonas as bacteria of which Pseudomonas was a non-pathogen. Botrytis-rot was most effectively suppressed by temperature. At $0^{\circ}C$, the incubation days at which 50% area of one onion leaf-fragment (2.5$\times$2.5cm) inoculated by Botrytis was rotten were 26.2 days and the rotting was delayed more by 21.8 days than at $25^{\circ}C$. For humidity, the effect was pretty insignificant in contrast with temperature effect. At RH 70% and $0^{\circ}C$, the incubation days at which 50% area of one onion leaf-fragment was rotten were 28.0 days and the rotting was delayed more by 1.8 days than at RH9o% and $0^{\circ}C$. By fumigation, the rotting was delayed by 3.8 days at RH 70% and $0^{\circ}C$. In case of slightly infected samples, temperature effect was reduced and the effects of humidity and fumigation were ignored, which implies that storage samples should be healthy.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.149-149
• /
• 2011

청정 에너지원으로 높은 잠재력을 가지고 있는 가스하이드레이트는 상업적 기술개발이 미확보된 상태임에도, 우리나라에서 부존이 직접적으로 확인되었기 때문에 에너지원으로서 그 중요성이 부각되고 있다. 현재 전세계적으로 가스하이드레이트 개발 및 생산에 관한 연구가 활발히 진행되고 있으며 이에 대한 기초자료로서 가스하이드레이트가 함유된 퇴적층의 물성자료가 필요하다. 이에 따라 본 연구에서는 입도 분포별 총 5가지의 미고결 시료를 대상으로 투과도, p파속도, 전기비저항 측정을 수행하였다. 연구에 사용된 미고결 시료는 Hama#5($774{\mu}m$), #6($485{\mu}m$), #7($258{\mu}m$), #8($106{\mu}m$) 4가지와 Hama#6과 Hama#7을 1:1($371{\mu}m$)로 혼합하여 사용하였다. 실험에 사용된 장비는 가스하이드레이트를 인공적으로 생성시키기 위해 퇴적층을 모사할 수 있는 고압셀과 자료획득장비, 유체 주입장비, 온도 유지장비이다. 또한 투과도 측정에는 차압계, 전기비저항 측정에 RLC meter, p파속도 측정에 음파 송수신장비를 사용하여 각각의 물성을 측정하였다. 실험과정을 단계별로 요약하면 먼저 시료를 고압셀에 충진한 뒤 주입된 물의 양으로부터 공극률을 측정하고, 절대 투수계수를 측정하였다. 그 후, 메탄가스를 주입하여 퇴적층 내 수포화도(water saturation)를 잔류상태(irreducible saturation)로 유지시키고 메탄가스를 추가적으로 주입하여 원하는 압력까지 가압한 뒤 온도를 $1^{\circ}C$로 낮추었다. 가스하이드레이트의 생성은 급격한 압력강하로부터 알 수 있다. 최종적으로 가스하이트레이트가 함유된 퇴적층의 상대 투수계수를 측정하기 위해 메탄가스를 주입하였고 각각의 측정장비를 통해 전기비저항 및 p파 속도를 측정하였다.$V_g$, $V_h$, $V_w$, $V_ss$는 각각 가스의 부피, 하이드레이트의 부피, 물의 부피, 모래의 부피이다. 또한 수포화도, $S_w=\frac{V_w}{V_v}$이며 하이드레이트 포화도, $S_h=\frac{V_w}{V_v}$, 가스 포화도, $S_g=\frac{V_g}{V_v}$로 정의된다. 본 실험의 결과 투과도는 가스의 부피비, $\frac{V_g}{V}=nS_g$에 민감한 반응을 보였으며, 비저항은 공극수의 부피비, $\frac{V_w}{V}=nS_w$에 민감한 반응을 보였다. 또한 p파 속도는 고체의 부피비, $\frac{V_s+V_h}{V}=n(1-S_h)$에 민감한 반응을 보였다. 이러한 실험의 결과는 가스하이드레이트 개발, 생산 연구에 있어 기초 물성자료로 활용되는데 도움을 줄 것이다.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.387-394
• /
• 2013

The developmental times of mealworm beetle larvae, Tenebrio molitor were studied at six temperatures ranging from 15 to $30^{\circ}C$ with 60~70% RH, and a photoperiod of 14L:10D. Mortality of larval period was very low at 17 and $20^{\circ}C$ but did not die over $22^{\circ}C$. Developmental time of larva was decreased with increasing temperature. The total developmental time of T. molitor larvae was longest at $17^{\circ}C$ (244.3 days) and shortest at $30^{\circ}C$ (110.8 days). Egg and larvae were not developed at $15^{\circ}C$. The lower developmental threshold and effective accumulative temperatures for the total larval stages were $6.0^{\circ}C$ and 2564.1 degree-days, respectively. The relationship between developmental rate and temperature was fitted by a linear model and nonlinear model of Logan-6($r^2$=0.95). The distribution of completion of each development stage was well described by the 2-parameter Weibull function ($r^2$=0.8502~0.9390).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.103-110
• /
• 2019

Recently, Korea has been affected by extreme weather events including extended summers and increased temperatures caused by global warming and climate change. Environmental temperature is especially important to the livestock industry because it is closely related to livestock productivity. This study was conducted to investigate the influence of different environmental temperatures on respiration rate, rectal temperature and body-surface temperature in finishing pigs. Pigs ($98.3{\pm}6.6kg$) were housed in individual cages inside an experimental chamber and exposed continuously to one of five environmental treatments ($22^{\circ}C$, $24^{\circ}C$, $26^{\circ}C$, $28^{\circ}C$, $30^{\circ}C$) for 10 days without providing additional rest time. Feed and water intake, respiration rate, rectal temperature and body-surface (head, ear, neck, back, side) temperature were measured two times daily during the experimental period. A significant increase in respiration rate from $26^{\circ}C$ and in body-surface temperature from $24^{\circ}C$ (p<0.05) was observed. At $30^{\circ}C$, the respiration rate had almost doubled and the body-surface temperature increased by about $5^{\circ}C-7^{\circ}C$. Moreover, ear skin temperature was very sensitive to environmental temperature. However, feed intake, water intake and rectal temperature did not change significantly during the experiment.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.4
• /
• pp.425-434
• /
• 2007

The SC (steel-concrete) composite column was developed to take advantage of the relative economy of using concrete as opposed to steel in carrying large compressive forces. As the SC composite column is pre-fabricated, its use can minimize laborand can speed up the erection of a steel building. In this study, an experiment was conducted to analyze the influence of several parameters, such as the load ratio, the concrete ratio of an area, and its performance with or without fire protection, on the performance of the SC composite column. This paper proposes that the calculation of the strength reduction ratios of columns be done by increasing the temperature. Theoretical equations were used to evaluate the effectiveness of the fire resistance of the SC composite column, and the results of the test and analysis were compared. The fire resistance of the SC composite column was increased by decreasing its load ratio, but the concrete ratio of an area has minimal influence on the fire resistance of the SC composite column.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.547-554
• /
• 2014

In this study, have researched 'a' index from three sound sources, effects on subject and finding optimal 'a' index, which can improve subject's stability, concentration and productivity. Check the health status of subjects who were selected 5 male and 5 female university students, and the period of this experiment was about two months. It were measured each subject's EEG, HRV and vibra image to analyze transition of stability, concentration, stress and heart beat. The results was measured in an environmental test room of temperature $25[^{\circ}C]$, the relative humidity 50 [%], illuminance 1,000 [lux] and air current speed 0.02[m/sec] with 'a' index of three sound sources which are a=1.106, a=1.749 and a=2.227. Results in a=1.106 compared to before exposure, relative $S{\alpha}$ wave, relative $L{\beta}$ wave and relative $M{\beta}$ wave have been revitalized, asymmetry index, stress and HRV have been decreased. Thus, to increase stability, concentration and productivity, also to decrease stress, changes in sound source of a=1.106 was found to be the most effective.