• Journal of Life Science
• /
• v.20 no.7
• /
• pp.1127-1133
• /
• 2010

The total photosynthetic rate in leaf mustard lines, which was calculated as the sum of the photosynthetic rate and the respiration rate, was not significantly different from their photosynthetic rate. Plant height, standing of rosetteness, showed a similar change to its specific leaf area (SLA). With increasing the plant height, leaf density increased and leaf color was lighter. It was found that shoot dry weight of leaf mustard was more affected by respiration. Also, it was hypothesized that respiration occurred not only in the leaf but also the stem. It was found that mustard lines whose leaf density was low showed a higher shoot growth. From this result, it was concluded that selection of a leaf mustard line with a larger SLA and lower leaf thickness could be effective in increasing photosynthetic rate.

• Journal of Life Science
• /
• v.24 no.10
• /
• pp.1092-1101
• /
• 2014

In this study, the distribution patterns of Quercus mongolica and Q. serrata in Korea were investigated, and the possibility of introgressive hybridization and gene flow between Q. mongolica and Q. serrata in Mt. Seorak was inferred by flavonoid analyses. The most critical factor in the vertical and horizontal distribution patterns of Q. mongolica and Q. serrata was the temperature, in accordance with latitude and altitude. The species showed a zonal distribution, with a Q. mongolica zone in the upper area and a Q. serrata zone in the lower area. In Mt. Seorak, Central Korea, the range of the vertical distribution of Q. mongolica was generally above an altitude of 100 m, whereas that of Q. serrata was an altitude of 0-400 m (-500) and rarely above an altitude of 500 m. However, in Mt. Jiri, Southern Korea, Q. serrata was found up to an altitude of 1,000~1,200 m, whereas the frequency of Q. mongolica was reduced at lower elevations and the species was rare below an altitude of 300 m, although pure stands were found on higher mountain slopes above an altitude of 1,200 m. The altitudinal distribution of the two species overlapped, where the two species occurred together. The leaf flavonoid constituents of thirty-four individuals of Q. mongolica and Q. serrata in Mt. Seorak and Mt. Jiri, Korea were examined. Twenty-four flavonoid compounds were isolated and identified. These were glycosylated derivatives of flavonols kaempferol, quercetin, isorhamnetin, myricetin. Five compounds among the flavonoid compounds were acylated. Kaempferol 3-O-glucoside, quercetin 3-O-glucoside, quercetin 3-O-galactoside, and its acylated compounds were major constituents and present in all individuals. Quercus mongolica is distinguished from Q. serrata by the presence of quercetin 3-O-arabinosylglucoside, a high concentration of three acylated compounds (kaempferol 3-O-glucoside, quercetin 3-O-glucoside, and quercetin 3-O-galactoside), and a relatively low concentration or lack of rhamnosyl flavonol compounds. Intraspecific variations, however, were found in the flavonoid profiles of Q. mongolica and Q. serrata, and the flavonoid profiles of individuals belonging to the two species in a hybrid zone (sympatric zone) tended to be similar, qualitatively and quantitatively. These findings strongly suggest that gene exchange or gene flow occurs through introgressive hybridization between Q. mongolica and Q. serrata in Mt. Seorak.

• Korean Journal of Environment and Ecology
• /
• v.2 no.1
• /
• pp.19-36
• /
• 1988

To investigate edge vegetation structure and edge species in Chiak Mountain National Park, field survey was executed from July to September, 1988. Canonpy drip-line type, cantilevered type and advancing type of edge vegetation were observed on site. The relative importance values of major species in each crown layer were changed along distance from edge to forest interior differently by aspect and present tree layer vegetation. Especially light-oriented edge species as codominant species were observed in Pinus densiflora forest interior at south slope and moisture - oriented species as codominant species were observed with light-oriented species in north edge beside torrential stream. No. of species and individuals by crown layer, species diversities and dissimilarities were decreased according to the distance from edge to forest interior, and edge depth was estimated as 15-20m. Dominant species of edge in shrub and ground layer were different by altitude and topographic locations; valley, ridge, summit and edge species at summit were not observed at other area. Floristic similarities between edge vegetations at different environments were affected by altitude, aspect and topographic location. Frequency classes of edge species were different by aspect, altitude and topographic location. Weigela subscssilis showed high frequency class in all environment conditions and Quercus mongolica, Lindera obtusiloba, Symplocos chinensis for, pilosa, weigela subscssilis, Fraxinus rhynchophylla, Actinidia arguta, Rubus crategifolius. Pinus densiflora, Aralia elata etc, were observed as edge species at all environmental conditions, respectively.

• Geophysics and Geophysical Exploration
• /
• v.12 no.3
• /
• pp.225-232
• /
• 2009

As part of seismic experiments investigating crustal velocity structures of the Korean peninsula, permanent (fixed) seismographs of the Korea Meteorological Administration (KMA) network recorded seismic signals from four and eight large explosions in Korean Crustal Research Team (KCRT) profiles shot in 2004 and 2008, respectively. Among the seismograms recorded by 43 velocity sensors and 103 accelerometers at KMA stations distributed throughout the southern Korean Peninsula, 156 records with epicentral distances less than 120 km and high signal-to-noise ratios were analyzed to determine velocity anisotropy of the Pg phase. Relative elevation corrections of -101.6 to 105.3 ms were made using velocity information derived from the 2004 KCRT profile data and differences in elevation between the permanent KMA stations and the temporary stations in the KCRT profiles at the same source-receiver offsets. To remove site effects, receiver-station corrections of -89.6 to 192.2 ms were additionally made to the KMA station data by subtracting the average differences in traveltimes between KMA stations and portable stations at the same offsets for all available shots with different azimuths. With the exception of anomalously fast velocities along trends of the Chugaryeong fault zone and the Okchon fold belt and anomalously slow velocities in the regions of high terrestrial heat near Yeongduk and Ulsan, the analysis of crustal velocity anisotropy using the Pg phase indicates overall isotropy in the southern half of the Korean peninsula.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.166-166
• /
• 2017

금속 재료 중 철강은 기계적 특성이 우수하고 대량생산이 가능하여 선박, 건축, 자동차 등 다양한 분야에 기초재료로써 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식환경에 취약한 특성을 가지기 때문에 내식성을 향상을 위한 표면처리에 관한 연구가 활발히 진행되고 있다. 가장 일반적으로 습식법(wet process)을 통해 표면상에 아연(Zn)을 도금해 사용하며, 아연이 자체적으로 포함한 희생양극(sacrificial anode) 및 차폐(barrier) 효과가 철강의 부식을 방지하게 된다. 하지만 산업의 고도화에 따라 더욱 가혹해진 노출환경으로 인해 고내식 강재에 대한 수요가 점차 증가하고 있으며, 아연코팅 층의 두께를 증가하여 내식성을 확보하는 방안은 미래 환경 및 자원적인 측면에서 근본적인 해결책으로 제시하기 어려움이 있다. 한편, 건식 프로세스(wet process)로 대별되는 PVD(physical vacuum deposition)에 의해 내식성을 향상시키고자 하는 연구들이 다양하게 진행되고 있다. 이것은 표면에 고순도 양질의 금속 막을 형성시킴으로써 외부환경과의 반응을 효과적으로 제어가 가능하며, 형성된 막은 그 물질의 고유 특성뿐만 아니라 제작 조건에 따른 표면의 기하학적 혹은 결정학적 구조에 의해 크게 영향을 받게 된다. 본 연구에서는 실용금속 중 이온화 경향이 가장 크고 산소와 반응하여 투과성이 작은 산화 피막 형성이 유리한 마그네슘(Mg)을 활용해 표면의 전기화학적 특성을 향상시켰다. 또한 금속 증착 중 진공도조절을 위해 도입되는 불활성 가스로 아르곤(Ar) 및 질소($N_2$)를 사용하여 표면에 형성한 막의 모폴로지 및 결정배향성이 내식성에 미치는 상관관계를 해석하고자 하였다. 실험방법으로 PVD법 중 비교적 간편하고 기초적인 지침을 제시하기 적합할 것으로 고려된 진공증착(vacuum evaporation)법을 이용해 아르곤 및 질소 분위기에서 진공도를 조절하며 용융아연도금상 Mg막을 형성하였다. 제작조건별 막의 기초 특성을 분석하기위해 SEM, EDS, XRD를 이용하였고, 결정배향성(crystal orientation) 분석을 위해 면간격(d-value)과 상대강도(relative intensity)를 확인하였다. 또한 내식성 평가로 염수분무(salt sprat test) 및 양극분극(anode polarization)을 각각 실시하였다. 실험결과에 따르면, Ar 및 $N_2$ 모두에서 가스압이 증가할수록 코팅층의 증착량은 적어지고 입상정(granular structure)의 모폴로지 형성 및 면간격과 상대강도가 증가하는 것이 확인되었다. 또한 쳄버 내 동일 진공도에서, $N_2$ 도입 시 Mg막은 더욱 치밀하고 미세한 입상정의 모폴로지로 형성되며 면간격과 상대강도는 더욱 증가한 것으로 나타났다. 내식성 평가에서 저진공 $N_2$ 조건에서 형성시킨 막이 가장 우수한 내식성이 나타났는데, 이는 상대적으로 불안정하고 반응하기 유리한 입계면적을 많이 포함한 입상정 모폴로지 및 표면에너지가 높은면의 면점유율 증가로 인해 외부환경과의 신속한 반응은 물론 안정적인 피막형성이 용이하였기 때문일 것으로 사료된다. 이상으로 Ar 및 $N_2$ 가스압 조건에 따른 고내식 Mg 막의 유효성을 확인하였고 향후 내식성을 향상시키는 방법으로 응용 가능할 것으로 생각된다.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.1
• /
• pp.18-23
• /
• 1983

Effect of Cd, Pb, and Zn content in soil on their accumulation in rice was studied by analyzing brown rice(93) and soil samples(180) collected from paddy soils near old zinc-mining sites in 1979 and 1980. Ratio of Cd, Pb, and Zn in brown rice to soil decreased with the increase of their contents in soil and found to be linear function of the inversed values of their contents in soil. Contents of Cd, Pb, and Zn in brown rice harvested in 1980 were lower than those in 1979. The significant difference in contents of Pb and Zn between two years might be attributed to weather. Air temperature and duration of sunshine in 1980 were significantly lower than those in 1979.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.493-500
• /
• 2012

The previous geoid model developed in early 2000s shows 14cm level of precision due to the problems on distribution, and quality of the land gravity and GPS/Leveling data. From 2007, the new land and airborne gravity data as well as GPS/Leveling data having high quality and regular distribution has been obtained. In 2011, a new gravimetric geoid model has been constructed with precision of 5.29cm which was improved about 27% comparing to the previous model. However, much more land gravity data has been collected at the control point, bench marks and triangulation points since 2010. Also, GPS/Leveling data having 10km spacing over whole country has been obtained through the project which is for the construction of new control points. In this study, new gravimetric geoid has been calculated based on the all available gravity data up to present. The geoid height shows the range from 18.05m to 32.70m over whole country and its precision is 5.76cm. The degree of fit and precision of hybrid geoid model are 3.60cm and 4.06cm, respectively. At the end, 3.35cm of the relative precision in 15km baseline has been calculated to confirm its practical usage. Especially, it has been founded that regional bias occurred at the Kangwon and coastal area due to problems on the leveling data. Also, some inland points show inconsistent large difference which needs to be verified by analyzing the unified control points results.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.9
• /
• pp.115-125
• /
• 1995

부품가공에 있어서 생산성향상을 위하여 버제거를 위한 고도의 기술이 더욱 중요하게 되었다. 특히 CIM 체제에서는 버제거의 자동화를 위하여 가공중에 발생하는 버형성과 파단현상을 정량적으로 예측할 필요성이 더욱 커졌다. 이미 연구된 2차원절삭에서의 버형성 모델을 실제적인 3차원절삭에 적용하기 위하여 기존의 모델을 수정하는 작업이 이루어졌다. 3차원 절삭모델로는 절삭인선에 수직한 면에서의 칩과 공구의 상대운동에 의해서 결정된다고 하는 Rubenstein의 가정이 사용되었다. 본연구에서 다루에되는 롤오버(roll-over) 버는 항상 공구진행방향으로 발생하기 때문에 3차원절삭에서의 버형성을 공구진행방향의 평면내에서의 2차원 절삭의 집합 으로 가정하였다. 공구의 기울림각(inclination angle)이 커질수록 버형성의 크기나 파단면의 크기가 감소하였다. 두종류의 파단이 버형성중에 관찰되었다. 하나는 가공물 끝면에 평행하게 파단면이 발생하였으며 다른 하나는 이에대하여 기울어진 파단이 일어났다. 가공물 끝면에 평행한 경우는 수정된 모델로부터 등가초기공구위치( equivalent initial tool distance)로부터 예측이 가능하며 기울어진 경우는 이결과와 공구의 기울림각으로부터 파단위치를 예측할 수 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.4
• /
• pp.20-31
• /
• 1994

The maximum likelihood(ML) estimation has excellent accuracy for frequency estimation of multiple sinusoids, but the maximum likelihood function requires much loss owing to the high nonlinearity. This paper presents a simplified maximum likelihood estimation, in order to improve the nonlinearity of the maximum likelihood estimation for frequencies of sinusoids in signals. This method is applied to the frequency estimation of sinusoidal signals corrupted by white or colored measurement noise. Monte-carlo simulations are conducted for the comparison of ML method with the best MFBLP method, in terms of sampled mean, root mean square and relative bias. The power spectral density and the position of frequency in unit circle are appeared in figures.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.1
• /
• pp.61-66
• /
• 1993

Position fixing is determined by triangulation, traverse surveying and astronomy surveying, However, when the station like a car move, it is impossible to determine the location of car. Satellite position fixing system can be used anywhere on earth arranged in 20, 000 km high with 24 satellites. The theoretical method of the fixing composition is possible to use satellite position fixing system. This paper is the part of the experiment which is dose for the development of the system used in Car-position fixing system. Also, this study is the comparison of one point positioning system and relative positioning system.