• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.41-51
• /
• 1999

This study was conducted to investigate the effects of local climatic conditions on the annual increment of Korean white pine planted in Gapyung and Yaungdong. For this, stand variables such as mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique which makes use of empirical relationships between the topography and the weather in study sites was applied to produce normal estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine. Then, the yearly climatic variables from 1990 to 1997 for each study site were derived from the spatial interpolation procedures based on inverse- distance weighting of the observed deviation from the climatic normals at the nearest 11 standard weather stations. From these estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc., which affect the tree growth, were computed on yearly base for each locality. The deviations of measured annual increments from the expected annual increments for 8 years based on yield table of Korean white pine were then correlated with and regressed on the yearly weather variables to examine effects of local climatic conditions on the growth. Gapyung area provides better conditions for the growth of Korean white pine in the early stage than Youngdong area. This indicates that the conditions such as low temperature, high relative humidity, and large amount of precipitation provide favor environment for the early growth of Korean white pine. A ccording to the correlation and regression an analysis using local climatic conditions and annual increments, the growth pattern of Gapyung area corresponds to this tendency. However, it was found that the relationship between annual increments and local climatic conditions in Youngdong area shows different tendency from Gapyung. These results mean that the yearly growth pattern could not sufficiently be explained by climatic conditions with high variance in yearly weather variables. In addition, the poor growth in Youngdong area might not only be affected by climatic conditions, but also by other environmental factors such as site quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.4
• /
• pp.697-702
• /
• 2001

This study was done to investigate effects of Korean mistletoe extract and lectin on serum GOT, GPT and $\alpha$-L-fucosidase activities and the preneoplastic lesion in chemically induced rat hepatocarcinogenesis. To attain the above objectives weanling Sprangue-Dawley male rats were fed modified AIN-76 diets containing 10% corn oil for 9 weeks. One week after feeding rats were intraperitonealy injected twice with a dose of diethylnitrosamine (DEN, 50 mg/kg body weight(BW)) and were provided 0.05% phenobarbita (PB) with drinking water from one week after DEN treatment until the end of experiment. For the same period as PB treatment, rats were injected mistletoe extract (10 $\mu\textrm{g}$/kg BW European mistletoe, 10 $\mu\textrm{g}$/kg BW and 100 $\mu\textrm{g}$/kg BW Korean mistletoe) and lectin(1 ng/kg BW, 10 ng/kg BW) twice a week. At the end of 9th week rats were sacrificed and the formation of hepatic glutthione S-transferase placental form positive (GST-P+) foci serum GOT, GPT and $\alpha$-L-fucosidase activities were determined. By treatment of mistletoe extract or lectin there were no significant effects on serum GOP, GPT and $\alpha$-L-fucosidase activities whereas those activities showed a tendency to increase by DEN treatment. The formation of GST-P+ foci was significantly decreased by mistletoe extract or lectin treatment especially in group of 100$\mu\textrm{g}$/kg BW Korean mistletoe. These results suggest that Korean mistletoe extract and lectin have a possibility to inhibit hepatocarcinogenesis of animals.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1344-1350
• /
• 2003

This study was performed to investigate the antioxidative effect as the inhibition of malondialdehyde (MDA) and bovine serum albumin (BSA) conjugation reaction, inhibition of lipid peroxidation and the scavenging effect on 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical, and antimutagenic capacities as the Ames test in 7 common vegetables taken by Korean for suggestion of prevention and dietetic treatment of chronic diseases and development of antioxidative and antimutagenic functional food. The water fractions of perilla leaves and sedum were most effective in the inhibition of MDA and BSA conjugation reaction showing 62.5% of inhibition rate among 7 vegetables. The inhibition rates of ethanol fractions of sedum and wild water dropwort on the lipid peroxidation were 67.1% and 61.5%, respectively. The ethanol fractions of crown daisy and wild water dropwort showed the most effective results among 7 vegetables in the DPPH radical scavenging capacities showing inhibition rate of 78.8% and 73.6%, respectively. The indirect and direct antimutagenic effects of ethanol extract of 7 vegetables were examined by Ames test using Salmonella typimurium TA98 and TA100. Inhibitory effects of wild water dropwort was superior to the other vegetables on the Ames test. These results suggest that common 7 vegetables taken by Korean are believed to be a possible antioxidative and antimutagenic capacities, although the results were different, more or less, according to the assay method and vegetables used.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.73-85
• /
• 1999

This study was conducted to reveal the characteristics of the early growth by locality for Korean white pine planted in Gapyung and Kwangju, Kyunggi-Do and Youngdong, Choongchungbuk-Do. The effects of local climatic conditions as one of environmental factors on the growth were also analyzed. For this, several stand variables such as number of trees survived, mean DBH, mean height, basal area per hectare, and volume per hectare by stand age were measured and summarized for each locality. Based on these statistics, periodic annual increments for 8 years from stand age 10 to 18 were calculated for each of stand variables. A topoclimatological technique, for the estimation of local climatic conditions, which makes use of empirical relationships between the topography and the weather in study areas was applied to produce reasonable estimates of monthly mean, maximum, minimum temperatures, relative humidity, precipitation, and hours of sunshine over remote land area where routine observations are rare. From these monthly estimates, 17 weather variables such as warmth index, coldness index, index of aridity etc. which affect the tree growth, were computed for each locality. The periodic annual increments were then correlated with and regressed on the weather variables to examine effects of local weather conditions on the growth. Gapyung area provided the best conditions for the growth of Korean white pine in the early stage and Kwangju area ranked second. On the other hand, the growth pattern in Youngdong ranked last overall as expected. It is also found that the local growth patterns of Korean white pine in juvenile stage were affected by typical weather conditions. The conditions such as low temperature, high relative humidity, and large amount of precipitation provide favorable environment for the growth of Korean white pine. Especially, the diameter growth, basal area growth, and volume growth are mainly influenced by the amount of precipitation. However, it is proved that the height growth is affected by both the precipitation and temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.226-226
• /
• 2008

지난 10여년 동안 Sn-3.0Ag-0.5(wt%)Cu 합금은 대표 무연솔더 조성으로 다양한 전자제품의 실장 및 접합에 적용되어 왔으며, 그 신뢰성 역시 충분히 검증된 바 있다. 그러나 최근 Ag 가격의 급격한 상승과 솔더 접합부의 내 충격 신뢰성을 보다 향상시키고자 하는 업계의 동향은 Ag의 함량이 낮은 무연솔더 조성의 적용 확대를 유도하고 있다. 이에 따라 본 연구자들은 저 Ag 함유 무연슬더로 Sn-1.2Ag-0.5Cu-0.4In 조성을 제안한 바 있는데, 이는 Sn-3.0Ag-0.5Cu 조성 이상의 solderability를 가지면서도 그 금속원료 가격이 약 20% 가량 저렴한 특징을 가진다. 또한 열 싸이클링 (cycling) 테스트를 통한 슬더 조인트의 신뢰성을 평가한 결과, Sn-3.0Ag-0.5Cu에 크게 뒤떨어지지 않는 양호한 특성이 관찰되었다. 따라서 본 연구에서는 열 싸이클링 테스트와 더불어 최근 그 중요성이 지속적으로 커지고 있는 내 충격 신뢰성 평가 시험을 실시하여 개발된 4원계 무연솔더 조성의 기계적 특성을 기존 무연솔더 조성과 비교, 분석해 보았다. 각 솔더 조성은 솔더 볼 형태로 제조되어 CSP(Chip Scale Package) 상에 범핑 (bumping)되었으며, CSP를 PCB(Printed Circuit Board) 상에 실장하는 공정에서도 Sn-3.0Ag-0.5Cu 및 Sn-1.2Ag-0.5Cu-0.4In의 두 종류의 솔더 페이스트가 사용되었다. 본 연구에서의 내 충격 신뢰성 시험에는 자체 제작한 rod drop 시험기를 사용하였는데, 고정된 CSP 실장 board의 후면 부위를 일정한 높이에서 추를 반복적으로 자유 낙하시켜 급격한 충격을 주는 방식으로 실험을 실시하였다. 이 때 추의 무게는 30g, 낙하 높이는 10cm 였으며, 추의 낙하 시 측정된 board 의 휨 변위량은 약 0.7mm로 측정되었다. 사용된 CSP와 PCB 는 모두 daisy chain 방식으로 연결되어 있기 때문에 저항측정기를 사용한 간단한 실시간 저항 측정 방법으로 시험 이력에 따른 파단부의 발생 시점과 대략의 위치를 손쉽게 확인할 수 있었다. 솔더 조인트의 파단 기준 저항값으로 $1000\Omega$을 설정하였으며. 각 조건 당 5 개 이상의 샘플에 대해 평가를 실시한 후 그 평균값을 조사하였다. 시험 결과 제안된 Sn-1.2Ag-0.5Cu-0.4In 조성은 대표적인 저 Ag 함유 조성인 Sn-1.0Ag-0.5Cu에 비해서는 떨어지는 내 충격 신뢰성을 나타내었지만, 우수한 연성에 기인하여 Sn-3.0Ag-0.5Cu 조성에 비해서는 약 2 배 이상 우수한 신뢰성이 관찰되었다. 또한 CSP의 실장 시 Sn-3.0Ag-0.5Cu보다 Sn-1.2Ag-0.5Cu-0.4In 조성 솔더 페이스트를 적용한 경우에서 보다 우수한 내 충격 신뢰성을 나타내어 기본적으로 개발된 Sn-1.2Ag-0.5Cu-0.4In 솔더 페이스트가 Sn-3.0Ag-0.5Cu 조성의 기존 솔더 페이스트 보다 내 충격 신뢰성이 우수함을 검증할 수 있었다. 각 조성의 솔더 조인트를 $150^{\circ}C$ 에서 500시간 aging한 후 실시한 내 충격 신뢰성 평가에서는 모든 조성에서 그 신뢰성이 급감하는 경항을 나타내었으나, Sn-1.2Ag-0.5Cu-0.4In가 Sn-l.0Ag-0.5Cu보다도 그 상대적인 신뢰성이 우수한 것으로 관찰되었다. 이와 같이 aging 후 실시하는 충격시험은 가장 실제적인 상황과 유사한 조건이므로 상기의 실험 결과는 매우 고무적이었으며, 이에 대한 보다 면밀한 분석이 요청되었다. 마지막으로 파면 및 미세조직 관찰을 통하여 각 조성에서의 충격 파단 특성을 비교, 분석해 보았다.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.305-312
• /
• 2010

The developmental time of immature stages of Paromius exiguus (Distant) was investigated at nine constant temperatures (15, 17.5, 20, 22.5, 25, 27.5, 30, 32.5, $35{\pm}1^{\circ}C$), 20-30% RH, and a photoperiod of 14:10h (L:D). Eggs did not develop at $15^{\circ}C$, and their developmental time decreased with increasing temperatures. Its developmental time was longest at $17.5^{\circ}C$ (28.2 days) and shortest at $35^{\circ}C$ (5.9 days). The first nymphs failed to reach the next nymphal stage at 17.5 and $35^{\circ}C$. Nymphal developmental time decreased with increasing temperatures between $20^{\circ}C$ and $32.5^{\circ}C$, and developmental rate was decreased at temperatures above $30^{\circ}C$ in all stages except for the fourth nymphal stage. The relationship between developmental rate and temperature fit a linear model and three nonlinear models (Briere 1, Lactin 2, and Logan 6). The lower threshold temperature of egg and total nymphal stage was $l3.8^{\circ}C$ and $15.3^{\circ}C$, respectively. The thermal constant required to reach complete egg and the total nymphal stage was 109.9 and 312.5DD, respectively. The Logan-6 model was best fitted ($r^2$=0.94-0.99), among three nonlinear models. The distribution of completion of each development stage was well described by the 3-parameter Weibull function ($r^2$=0.91-0.99).

• Korean journal of applied entomology
• /
• v.50 no.4
• /
• pp.343-352
• /
• 2011

The developmental period of Laodelphax striatellus Fallen, a vector of rice stripe virus (RSV), was investigated at ten constant temperatures from 12.5 to $35{\pm}1^{\circ}C$ at 30 to 40% RH, and a photoperiod of 14:10 (L:D) h. Eggs developed successfully at each temperature tested and their developmental time decreased as temperature increased. Egg development was fasted at $35^{\circ}C$(5.8 days), and slowest at $12.5^{\circ}C$ (44.5 days). Nymphs could not develop to the adult stage at 32.5 or $35^{\circ}C$. The mean total developmental time of nymphal stages at 12.5, 15, 17.5, 20, 22.5, 25, 27.5 and $30^{\circ}C$ were 132.7, 55.9, 37.7, 26.9, 20.2, 15.8, 14.9 and 17.4 days, respectively. One linear model and four nonlinear models (Briere 1, Lactin 2, Logan 6 and Poikilotherm rate) were used to determine the response of developmental rate to temperature. The lower threshold temperatures of egg and total nymphal stage of L. striatellus were $10.2^{\circ}C$ and $10.7^{\circ}C$, respectively. The thermal constants (degree-days) for eggs and nymphs were 122.0 and 238.1DD, respectively. Among the four nonlinear models, the Poikilotherm rate model had the best fit for all developmental stages ($r^2$=0.98~0.99). The distribution of completion of each development stage was well described by the two-parameter Weibull function ($r^2$=0.84~0.94). The emergence rate of L. striatellus adults using DYMEX$^{(R)}$ was predicted under the assumption that the physiological age of over-wintered nymphs was 0.2 and that the Poikilotherm rate model was applied to describe temperature-dependent development. The result presented higher predictability than other conditions.

• Korean Journal of Food Science and Technology
• /
• v.13 no.4
• /
• pp.314-318
• /
• 1981

In order to improve the storage stability of spray and freeze dried red ginseng extract powder packed in a bottle, the water vapor permeability of Al-foil laminate paper used for cap closure and shelf life of those products on various storage temperatures and relative humidities were investigated. The thickness of the laminate paper was $93{\pm}3\:{\mu}m$ and its physical properties were equal to standard of ASTM (B-377-66) The absorption rate of the freeze dried powder was 2-6 times greater than that of the spray dried powder at $37^{\circ}C$. Therefore it was considered that the laminate could be used for cap closures for the spray dried powder but unsuitable for the freeze dried powder. The shelf life of the spray dried powder was longer than that of the freeze-dried powder at $37^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.126-135
• /
• 2002

Plate bonding technique has been widely used in strengthening of existing concrete structures, although it has often a serious problem of premature falure such as interface separation and rip-off. However, this premature failure problem has not been well explored yet especially in view of local failure mechanism around the interface of plate ends. The purpose of the present study is, therefore, to identify the local failure of strengthened plates and to derive a separation criterion at the interface of plates. To this end, a comprehensive experimental program has been set up. The double lap pull-out tests considering pure shear force and half beam tests considering combined flexure-shear force were performed. The main experimental parameters include plate thickness, adhesive thickness, and plate end arrangement. The strains along the longitudinal direction of steel plates have been measured and the shear stress were calculated from those measures strains. The effects of plate thickness, bonded length, and plate end treatment have been also clarified from the present test results. Nonlinear finite element analysis has been performed and compared with test results. The Interface properties are also modeled to present the separation failure behavior of strengthened members. The cracking patterns as well as maximum failure loads agree well with test data. The relation between maximum shear and normal stresses at the interface has been derived to propose a separation failure criterion of strengthened members. The present study allows more realistic analysis and design of externally strengthened flexural member with steel plates.

• Economic and Environmental Geology
• /
• v.43 no.6
• /
• pp.625-636
• /
• 2010

The geophysical characteristics and geological structure of the northeastern part of the Ulleung Basin were investigated from interpretation of geophysical data including gravity, magnetic, bathymetry data, and seismic data. Relative correction was applied to reduce errors between sets of gravity and magnetic data, obtained at different times and by different equipments. The northeastern margin of the Ulleung Basin is characterized by complicated morphology consisting of volcanic islands (Ulleungdo and Dokdo), the Dokdo seamounts, and a deep pathway (Korea Gap) with the maximum depth of -2500 m. Free-air anomalies generally reflect the topography effect. There are high anomalies over the volcanic islands and the Dokdo seamounts. Except local anomalous zones of volcanic edifices, the gradual increasing of the Bouguer anomalies from the Oki Bank toward the Ulleung Basin and the Korea Gap is related to higher mantle level and denser crust in the central of the Ulleung Basin. Complicated magnetic anomalies in the study area occur over volcanic islands and seamounts. The power spectrum analysis of the Bouguer anomalies indicates that the depth to the averaged Moho discontinuity is -16.1 km. The inversion of the Bouguer anomaly shows that the Moho depth under the Korea Gap is about -16~17 km and the Moho depths towards the Oki Bank and the northwestern part of Ulleung Island are gradually deeper. The inversion result suggests that the crust of the Ulleung Basin is thicker than normal oceanic crusts. The result of 20 gravity modeling is in good agreement with the results of the power spectrum analysis and the inversion of the Bouguer anomaly. Except the volcanic edifices, the main pattern of magnetization distribution shows lineation in NE-SW. The inversion results, the 2D gravity modeling, and the magnetization distribution support possible NE-SW spreading of the Ulleung Basin proposed by other papers.