• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.183-193
• /
• 2008

This paper shows the results of failure mode analysis and the system-level reliability model for the flight test of KSLV-I upper stage. First, the critical 14 functions of KSLV-I upper stage are identified and the mission profile of the flight test is analyzed. Then, based on the functional analysis and the mission profile analysis, we construct a hierarchical structure of failure modes and a system-level reliability model for the flight test of KSLV-I upper stage.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.8 no.2
• /
• pp.121-124
• /
• 2009

Patellar fractures in children represent less than 2% of all patellar fractures including adults, and occur about 1% of all pediatric fractures. Because of property of the growing patella, osteochondral or avulsion fractures are more common in children and the most common type of patella fracture in children is sleeve fracture. Avulsion or sleeve fractures of the patella in children can occur at the superior or inferior pole of the patella. Most reported cases of sleeve fracture are involving the inferior patellar pole, but involving the superior patellar pole is very rare. We experienced a case of sleeve fracture occurred at the superior pole of the patella in a sixteen-year-old boy and report this case with literature review.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.75-95
• /
• 2002

The Andong pluton in the Andong Batholith is composed of comagmatic plutonic rocks, in which the lithofacies comprise hornblende biotite tonalite in the central paft biotite granodiorite in the marginal paft and porphyritic biotite granite at the topside (noJthea~tern paft) of the pluton. The pluton is petrographically and petrochemically zoned, having more mafic center than margin and topside. Distribution pallern of the lithofacies represents a reverse zoning in the pluton. Modal and chemical data in the pluton show progressive and gradual compositional variations from the centrer via the margin to the topside. Quartz and K-teldspar increase toward the topside of the pluton, whereas hornblende, biotite and color index increase toward the center. The bulk composition in the pluton is also reversely zoned, with high $Si0_2$ and $K_{2}O$ in the topside facies, and high MnO, CaO, $Ti0_2$, $Fe_{2}O_{3}$t, MgO and $P_{2}O_{5}$ in the central facies. The reverse zoning is also evident in higher Cr. V, Ni, Sc and Sr of the more mafic tonalite in the interior. The reversely zoned pluton results from remobilization (resurgence) of the lower more mafic compositional zone into the upper more felsic zones of the pluton modified by thennogravitational diffusion and fractional crystallization. In the initial stages of evolution, the pluton was a petrochemical system that fonned chemical compositional zonation with mafic tonalitic magma in the lower. granodioritic one in the middle and granitic one in the upper paft of the magma chamber. Periodic influxes of more mafic magma from the ba~e resulted in mingling of liquids and redistribution of minerals, and may have triggered the remobilil.ation of the lower compositional zone into the upper more felsic zones.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.107-115
• /
• 2011

The line-telemetry data processing system is necessary for monitoring the status of each onboard systems of KSLV-I upper stage during the ground tests and launch preparation. The mission of line-telemetry system is to provide reference telemetry data and to monitor the status of upper stage. The line-telemetry data processing system consists of a PCM acquisition/processing server, a system management server, and 9 monitoring consoles. In this paper, we will describe the overview of onboard remote measurement system, the design of the line-telemetry data processing system, anomaly setup information for indicating alarm signal in case of abnormal occurrence, and the result of the ground test and flight test.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.171-179
• /
• 2007

The Test Equipment for the upper stage of KSLV-I has following functions via umbilical cable interface; external power supply, command output such as discrete and analog, data acquisition, CS-I interface simulation for first stage of KSLV-I and RS-422 serial communication for PDU. The main purpose of UTE is the experiment or function verification of system-level upper stage. To realize this system, we used PXI control system. The UTE is consisted of the PXI control system, power supply, terminal block, internal harness, connector panel and so on. The software functions of UTE are classified by four blocks. These are Discrete/Analog I/O control, PDU RS-422 serial communication control, power supply GPIB control and UTE remote control. In this paper, we will describe the design on the hardware and software of UTE.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.624-631
• /
• 2002

The insertion loss of the noise barriers with several top shape is measured in an anechoic room by using a reduced scale model test. The insertion loss differences between a straight vertical barrier having 0.3 m height and several barriers with simple top shaped are compared. The results show that the latter is more effective than the former and absorptive barrier is more effective than the reflective one. Among the barrier types of 'T', 'Y', and '(equation omitted)', type 'Y' is the best one and the rest have similar effect. This result is well agree with Alfredson (PIOC. Inter-Noise 95, p. 381, 1995)'s but contradict to May (J. Sound Vb. 71, p. 73, 1980)'s. Therefore, it is difficult to determine which type is the best. In order to find out this discrepancy, boundary element method is adopted and the result shows one can have different result because each supposed different experimental conditions like height of noise barrier, positions of sound source and receiver, etc.

• Korean Journal of Agricultural Science
• /
• v.9 no.2
• /
• pp.461-466
• /
• 1982

Lower and upper petiole segments of strawberry plants (Fragaria${\times}$ananassa) were cultured on Murashige and Skoog (MS) medium containing 2mg/liter Benzylamino purine (BA), 0.02mg/liter 2,4-dichlorophenoxyacetic acid (2,4-D), or their coinbination. Of the lower petiole segments, 55% or more were differentiated on the media containing $2mg/{\ell}\;BA$ or $2mg/{\ell}\;BA+0.02mg/{\ell}\;2,4-D$. There was no significant difference in results be tween these treatments. BA did not influence root formation. No shoots we re initiated from the upper petiole segments. Root formation was stimulated by the $0.02mg/{\ell}\;2,4-D$ medium, whereas it inhibited shoot formation. Upper petiole segments produced more roots than did lower petiole segments.

• Bulletin of the Korean Space Science Society
• /
• 2006.10a
• /
• pp.108-108
• /
• 2006

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.110-116
• /
• 2008

This paper gives a brief summary of the TVC battery design description, specifications and test results. The TVC battery for KSLV-I upper stage contains 168 Sony l8650VT high power lithium-ion cells. It configured as 2 strings in parallel, with each string containing 84 series connected cells. This allows to meet nominal 270V voltage and capacity requirements specified for the mission of the Thrust Vector Control(TVC) system. The loads profile of the TVC system has short duration, high current pulse. To power such a system with minimal mass, the battery employed l8650VT Cells. This cell is specifically designed for high rate applications and is capable of a 10C continuous discharge.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.279-284
• /
• 2015

본 논문은 하중에 따른 변화정도에 초점을 맞추어 PSC girder길이의 증가를 위해 Co-rotational Plane Beam with Arbitrary Section Solver를 통하여 비선형 구조해석을 진행하여 Jeon, S., Choi, M., and Kim, Y. 등에 의해 제시된 Decked girder의 구조적 우수성을 검증하고, 이를 보완한 새로운 단면형상의 PSG girder를 제시하였다. 도출된 결과 값은 탄성방정식을 통하여 얻은 값과 비교하여 신뢰성을 검증하였다. 해석을 통하여 단순히 girder 상단부 플랜지의 길이를 증가시키는 것은 girder의 변형정도를 줄이는데 큰 영향을 주지 않는 다는 사실을 알 수 있었고 girder 상단부 플랜지와 중심부를 연결하는 부분의 단면형상을 좀 더 두껍게 함으로 하중에 따른 girder의 변형량을 크게 감소시킬 수 있었다.