• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.421-431
• /
• 2007

The main purpose of this study is to develop a sprayed FRP repair and strengthening method, which is a new technique for strengthening the existing concrete structures by mixing one of the carbon or glass chopped fibers and one of the epoxy or vinyl ester resins with high-speed compressed air in open air and randomly spraying the mixture onto the concrete surface. At present, the sprayed FRP repair and strengthening method using the epoxy resin has not been fully discussed. In order to investigate the material property of the sprayed FRP, this study carried out tensile tests of the material specimens, which were changed with the combinations of various variables including the length of chopped fiber and the mixture ratio of chopped fiber and resin. These variables were set to have the equal material strength, compared with that of one layer of the FRP sheet. As a result, the optimal length of glass and carbon chopped fibers was fumed out to be 38 mm, and the optimal mixture ratio between chopped fiber and resin was also turned out to be 1 : 2 from each variable. And also, the thickness of the sprayed FRP to have the equal strength to one layer of the FRP sheet was finally calculated. In is study, a series of experiments were carried out to evaluate the strengthening effects of flexural beams, shear beams and damaged beams strengthened with the sprayed FRP method, respectively. The results revealed that the strengthening effects of the flexural and shear specimens were reasonably similar to those of the FRP sheet, and the developed Sprayed FRP technique is able to be used as a strengthening scheme of existing RC building.

• Korean Journal of Social Welfare
• /
• v.36
• /
• pp.71-99
• /
• 1998

There is a general consensus that fate of the differentiated welfare state had fallen into the brink of demise during the 1970s while the integrated welfare state model has emerged instead. Indications are all that such trend spotlights occupational welfare which has been relatively neglected, especially, in the field of social welfare. Nevertheless, the occupational welfare system in Korea faced crisis due to two major incidents. One is the IMP crisis which necessitates massive scale of restructuring of the general fabric of the Korean business and industry. There is little doubt that the economic crisis will surely cut down occupational welfare expenditure substantially. The other is a report released by the Korean Labor Research Institute which argus that there is no correlation between the Korean occupational welfare system and labor productivity. Thorough investigation of the Korean occupational welfare system suggests that current system is so outdated that it doesn't meet needs of the industrial workforce which, in turn, fails to enhance workers productivity. Consequently, a need for new paradigm and system arises and employee assistance program(EAP) emerges as a viable alternative. EAP is thoroughly delianeated of it's definition, motivations, functions, ingredients, historical background as well as cost-effectiveness. But major tasks center around an investigation and an analysis of it's applicability. In-depth analysis was carried out on the issue of it's indispensable natures and stumbling blocks on the way to lay it's root in the Korean industrial environment. It seems harder than the herculean task. However, EAP is not simply an alternative but is rather a pressing imperative for the present occupational welfare system in Korea which stands at the crossroad.

• Korean Journal of Ichthyology
• /
• v.18 no.2
• /
• pp.65-77
• /
• 2006

Gene transcripts potentially responsive to the heat stress were surveyed by cDNA microarray analysis in mud loach (Misgurnus mizolepis). Transcriptional profiles of hepatic tissue in the fish exposed to either $23^{\circ}C$ or $32^{\circ}C$ for 4 weeks were compared each other by 3 replicated hybridization assays using 1,124 unigene clones selected from mud loach liver expressed sequence tags (ESTs). A total of 93 clones showed the substantially increased mRNA levels (>2-fold) in $32^{\circ}C$-exposed group when compared in $23^{\circ}C$control group. It includes various enzymes and proteins involved in energy pathway, protease/protein metabolisms, immune/antioxidant functions, cytoskeleton/cell structure, transport and/or signal transduction. Maximum level of increase was up to 15-fold relative to $23^{\circ}C$ treatment. Heat exposure also resulted in the significant decrease (less than 50% relative to $23^{\circ}C$-exposed fish) of the transcriptional activities in 85 genes. Besides the above categories, yolk protein (vitellogenin) and ribosomal proteins were notably down regulated in the fish exposed to heat stress. A number of novel gene transcripts were also detected in both up-regulated and down-regulated groups.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.290-300
• /
• 2009

The existing numerical methods on the vertical membrane breakwater have employed a linear analysis where the variable membrane tension occurring during membrane motions is assumed to be very negligible compared to the initial tension. In the present study, a quasi-nonlinear analysis is attempted such that the temporary tension of the membrane is substituted by the average tension for a wave period that is sought by an iterative calculation. The results showed that with the increase of the wave period the reflection coefficients appeared larger and the transmission coefficients smaller compared to the results of the linear analysis. The application of the quasi-nonlinear analysis also showed that the performance of the structure is closely dependent on the horizontal deformation of the membrane. In order to suppress the horizontal deformation, it may be required to take the larger initial tension of the membrane or to put additional mooring lines in the middle of the vertical faces of the membrane. But for theses methods to be effective, a largely sized surface float should be installed to secure enough buoyancy to support such downward forces.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.73-73
• /
• 2010

합금원소가 다량 첨가된 고합금강, 스테인리스강, Ni기 초내열합금 등은 용접시 혹은 후열처리 동안 열영향부 (HAZ: heat-affected-zone)에서 결정립계를 따라서 액화균열이 종종 발생한다. 이러한 액화균열은 급속한 가열시 HAZ의 결정립계가 국부적으로 용융되어 액상필름을 형성하고, 냉각시 수축으로 인한 인장구속응력에 의해 필름을 따라서 균열이 발생하여 생성된다. HAZ 결정립계 액화는 탄화물, 황화물, 인화물, 보론계 화합물 등이 급가열시 기지와의 반응에 의해 표피 액상을 형성하는 조성적 액화 (constitutional liquation)에 의한 액상의 결정립계 침투로 설명되거나, 결정립계 자체의 용융점을 상당량 낮추는 보론(B), 인(P), 황(S)등의 편석에 의한 국부적 입계 용융으로 주로 연관 지어 해석한다. HAZ 액화균열은 고온 입계균열 현상이므로, 결정립계의 특성에 따라 크게 영향을 받으며 결정립계 character 설계에 의해 액화균열 저항성을 개선시킬 수 있음을 유추할 수 있다. 한편, 본 연구자들은 최근 Ni기 초내열합금에 있어 입계 serration 현상을 새롭게 발견하였으며, 이론적 접근법을 통해 serration을 위한 특별한 열처리 방법을 개발하였다. 형성된 파형입계는 결정학적인 관점에서 조밀 {111} 입계면을 갖도록 분해 (dissociation)되어 낮은 계면에너지를 갖게 됨을 확인하였으며, 입계형상 변화뿐만 아니라 탄화물 특성변화까지 유도하여 크리프 수명을 기존대비 약 40% 정도 향상시킴을 확인하였다. 본 연구에서는 이러한 직선형 입계 대비 'special boundary'로 간주되는 파형입계가 도입될 경우, 보론 편석 및 HAZ 액화거동에 미치는 영향을 고찰하고자 하였다. SIMS (secondary ion mass spectrometry)를 이용하여 열처리 직후 결정립계 보론편석 정도를 비교하였다. 파형입계 시편의 경우, 일반직선형 시편에 비해 결정립계에 보론편석 저항성이 우수함을 확인할 수 있었다. 재현 HAZ 열사이클 시험을 통해 미세조직을 정량적으로 분석하였다. 파형입계 시편 및 일반직선형 시편 모두 최고온도 $1060^{\circ}C$이상부터 입계 탄화물이 기지내로 완전 용해되고 입계가 액화되기 시작하였다. 최고온도별로 입계액화비율을 정량적으로 비교한 결과, 파형입계가 직선입계 대비 훨씬 낮음을 확인할 수 있었으며, 때때로 액화된 필름이 입계를 따라 전파되지 않고 부분적으로 단락되어 있음이 관찰되었다. 액화시험 후 투과전자현미경을 이용한 EDS (energy dispersive spectrometry) 분석을 통해 결정립계 액화의 주요원인은 입계 $M_{23}C_6$의 조성적 액화반응 보다는 보론 편석 (원자 및 $M_{23}(CB)_6$)으로 인한 결정립계 국부용융이 더 유력함을 유추할 수 있었다. 따라서 상기 결과로부터 입계구조가 안정되어 계면에너지가 낮은 파형입계가 보론편석에 대한 저항성이 우수하였으며, 이러한 결과는 액화 저항성에 대응되어 영향을 미침을 알 수 있었다. 게다가 파형입계에 액상 필름이 생성되더라도 낮은 계면에너지에 의해 비롯된 상대적으로 낮은 적심성 (wettability)에 의해 필름이 쉽게 전파되지 않음을 'Smith 입계 wetting 이론'을 이용하여 해석할 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.241-246
• /
• 2012

$Yb^{3+}$, $Er^{3+}$ co-doped $SrMoO_4$ ($SrMoO_4$ : $Yb^{3+}/Er^{3+}$) specimens have been successfully synthesized via the complex citrate-gel method and their structural and optical properties were investigated in detail. Under 980 nm excitation, $SrMoO_4$ : $Yb^{3+}/Er^{3+}$ UC phosphors have been emitted strong green luminescence at 530 and 550 nm with weak red emission around 670 nm corresponding to the intra 4f transitions of $Er^{3+}$ ($^4F_{9/2}$, $^2H_{11/2}$, $^4S_{3/2}$) ${\rightarrow}$ $Er^{3+}$ ($^4I_{15/2}$). The optimal doping concentrations of $Er^{3+}$ and $Yb^{3+}$ ions were verified to 2/16 mol% and a possible upconversion mechanism depending on pump power dependence is studied in detail.

• Clinical and Experimental Pediatrics
• /
• v.46 no.1
• /
• pp.91-94
• /
• 2003

Raine syndrome was described as an unknown syndrome in 1989. It is characterized by severe craniofacial anomalies with microcephaly, hypoplastic nose, depressed nasal bridge, exophthamos/protosis, gum hypertrophy, cleft palate, low-set ears, small mandible, narrow chest, wide cranial sutures and choanal atresia or stenosis, by generalized osteosclerosis with subperiosteal thickening of ribs, clavicles and diaphysis of long bones, and by intracranial calcifications in the particularly periventricular area. It undergoes an autosomal recessive inheritance. Twelve cases of Raine syndrome have been reported in the literature. However, a case of Raine syndrome in Korea has not been reported yet. Therefore, we describe a female newborn with Raine syndrome with a brief review of the literatures.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.663-673
• /
• 2010

As a tool used for video maintenance, Video segmentation divides videos in hierarchical and structural manner. This technique can be considered as a core technique that can be applied commonly for various applications such as indexing, abstraction or retrieval. Conventional video segmentation used adaptive threshold to split video by calculating difference between consecutive frames and threshold value in window with fixed size. In this case, if the time difference between occurrences of cuts is less than the size of a window or there is much difference in neighbor feature, accurate detection is impossible. In this paper, Improved Adaptive threshold algorithm which enables determination of window size according to video format and reacts sensitively on change in neighbor feature is proposed to solve the problems above. Post-Processing method for decrement in error caused by camera flash and fast movement of large objects is applied. Evaluation result showed that there is 3.7% improvement in performance of detection compared to conventional method. In case of application of this method on modified video, the result showed 95.5% of reproducibility. Therefore, the proposed method is more accurated compared to conventional method and having reproducibility even in case of various modification of videos, it is applicable in various area as a video maintenance tool.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.373-381
• /
• 2002

There has been an interesting trend showing that the number of tankers owned by major oil company has been decreasing since the 1980s, while the number of tankers chartered by them is increasing. So do Korea oil refineries in the period 1990s. Therefore, the following question is raised： Why have oil refinery companies, national and international, been much more dependent upon chartered ships than their owned ships since 1980s\ulcorner This paper tried to answer the above question. In so, doing ten decision-making factors for fleet composition of oil tankers are drawn through literature survey on the research topic with questionnaires and interviews to the four big Korean oil refineries.

• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.271-278
• /
• 2006

This paper presents industry feedback and a case of improvement trial on enabling reuse driven software development which is one of several activities to improve software quality and productivity in a company which develops software that are embedded into consumer electronic products. Several case studies will be introduced that are related to software reuse strategies and practices to show how to establish environment for reuse basis in a company, how to apply it to development team and project and how to improve that through trials and errors. To enable reuse-oriented software development in a huge company, integrated and focused approach is needed among technical, management and environmental point of view. We tried to solve that problem in technical field with reuse method, in management filed with reuse metric and in environment field with reuse repository. The characteristics of our software development environment could be summarized as below. The first, embedded software which would not independent to hardware devices and the second, it is very huge company which develops extremely various products by many different organization with different domain characteristics and the third, development lead time is extremely short and many variation models are stems from basic models. We expect that our study would give contribution to industry struggling to solve similar problem for presenting our experience and could be a reference model for enabling software reuse in a real world practically.