• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.824-831
• /
• 2011

This study was to investigate 90-day repeated-dose toxicities of 50 kGy irradiated methanol extract powder of red ginseng in ICR mice. The test materials (methanol extract powder of red ginseng with or without 50 kGy irradiation) were administered by gavage to male and female ICR mice at dose levels of 0, 125, 250 and 500 mg/kg/day for 90 days. In the results, no abnormality was observed in mortality, clinical findings, body weight changes, food consumptions, opthalmoscopic findings, necropsy findings and histopathological findings. Although the minor changes in blood and biochemical parameters were observed, they were not dose dependent and not affected by gamma irradiation. In conclusion, 90-day repeated oral dose of the methanol extract powder of red ginseng and 50 kGy irradiated methanol extract powder of red ginseng to ICR mice did not cause apparent toxicological change at the dose of 125, 250 and 500 mg/kg body weight.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.3
• /
• pp.231-238
• /
• 2008

This study proposed the method of phosphate recovery from municipal wastewater by using ferrous iron waste, generated from the mechanical process in the steel industry. In the analysis of XRD, ferrous iron waste was composed of $Fe_3O_4$ (magnetite), practically with $Fe^{2+}$ and $Fe^{3+}$. It had inverse spinel structure. In order to identify the adsorption characteristic of phosphate on ferrous iron waste, isotherm adsorption test was designed. Experimental results were well analyzed by Freundlich and Langmuir isotherm theories. Empirical constants of all isotherms applied increased with alkalinity in the samples, ranging from 1.2 to 235 $CaCO_3/L$. In the regeneration test, empirical constants of Langmuir isotherm, i.e., $q_{max}$ (maximum adsorption capacity) and b (energy of adsorption) decreased as the frequency of regeneration was increased. Experiment was further performed to evaluate the performance of the treatment scheme of chemical precipitation by ferrous iron waste followed by biological aerated filter (BAF). The overall removal efficiency in the system increased up to 80% and 90% for total phosphate (TP) and soluble phosphate (SP), respectively, and the corresponding effluent concentrations were detected below 2 mg/L and 1 mg/L for TP and SP, respectively. However, short-circuit problem was still unsolved operational consideration in this system. The practical concept applied in this study will give potential benefits in achieving environmentally sound wastewater treatment as well as environmentally compatible waste disposal in terms of closed substance cycle waste management.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.783-787
• /
• 2004

Microwave dielectric properties and the microstructure of $Ba_5Nb_4O_{15}$ ceramics with $PbO-B_2O_3-SiO_2$ glass frit were investigated to reduce the sintering temperature of $Ba_5Nb_4O_{15}$ ceramics as a function of the amount of glass frit from $0.5wt\%$ to $10wt\%$ and the sintering condition. The sintered density and the microwave dielectric properties of $Ba_5Nb_4O_{15}$ ceramics were remarkably changed with the amount of glass fit which existed as a liquid phase and assisted the densification. $Ba_5Nb_4O_{15}$ with $3wt\%$ $PbO-B_2O_3-SiO_2$ glass frit sintered at $900^{\circ}C$ for 2 h showed dielectric constant (K) of 41.4, a quality factor (Q $\times$f) of 13,485 GHz, and a Temperature Coefficient of resonant Frequency (TCF) of 9 ppm/$^{\circ}C$. Due to no trace of physical and chemical reaction between this composition and Ag electrode cofired at $900^{\circ}C$ for 2 h, this ceramics can be a good candidate for the multilayer dielectric filter.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.60-72
• /
• 2001

This paper presents the user-interactive productivity analysis model based on material balance as well as deliverability equations equipped with EOS model to perform a productivity analysis for Gorae V structure, Donghae-1 gas field. This model is designed to be able to analyse the productivity in the case of reservoir contacting with the aquifer. Also, in order to investigate the effect of condensation on productions, condensation phenomenon is considered as an apparent skin effect in the computation of bottomhole pressure from average reservoir pressure. By utilizing the developed model, we investigate the productivity analysis for B2 layer of Garae V structure with the various production cases in volumetric and non­volumetric reservoirs that contact with aquifer. From the results in the case of 5500 MMSCF/year of production and reservoir-aquifer contacting angle 270$^{\circ}C$ with aquifer size of 10 times greater than reservoir, B2 layer could maintain peak production rate even after 8.5 years of production by considering the bottomhole pressure which is estimated above the operating pressure of 1298 psia. It is also found that condensate will be formed after 1100 days of production and existed throughout the reservoir at 1270 days. Note that the computed reservoir pressure of B2 layer is maintained sufficiently high enough for production due to the water influx into the reservoir, and skin effect caused by condensation is not significant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.83-89
• /
• 2018

The thermal characteristics of concrete specimens were analyzed using cement paste specimens with artificial cracks. In order to understand the temperature characteristics of the specimen depending on the crack depth, the specimen was heated and the minimum temperatures of the specimens at which cracks appear were investigated according to the crack depth. It was confirmed that the surface temperature distribution of the specimen varies depending on whether the specimen is cracked or not, because of the single and multiple reflections of the incident energy. Furthermore, as the temperature distribution of the specimen reaches a steady state, the temperature data tends to decrease with the crack depth. Through the observation of the normalized temperatures, it was found that the temperature of the specimens obtained from this experiment reached a steady state after 10 minutes. At this time, the standard deviation of the normalized temperature is around 0.01 or less, and the temperature decreases linearly with increasing crack depth. This result is considered to be closely related to the area where multiple reflections occur in the cracked region. If the correlation between the crack region and the incident energy is analyzed for various specimens, it can be applied to the diffuse reflection of the light.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.136-144
• /
• 2011

The Purpose of this research was to identify the factors have influenced Word-of-mouth with a personal Innovativeness in using QR code and to get an advertising & marketing side implication. For this, researcher examined a SEM (structural equating model) methodology of the route from the study on the influencing factors the QR code user's pre and post acceptance behavior and applied the examined variables, existing Expanded TAM, TRAM, PAM which is a contribution points. As a result of this study, first, it was confirmed that the personal innovativeness affected user's perceived usefulness, joyfulness, use intention, and satisfaction. Second, it was confirmed that innovativeness affected perceived usefulness, use intention and this route connected to WOM, in other side, it was discussed that innovativeness affected joyfulness, satisfaction and this route connected to WOM. The above result means that 'joyfulness', 'satisfaction' are important elements, in terms of marketing aspect, for the companies to take an advantage of QR Code as a means of advertising. It should be understood that users don't spend their time on the service having no joy as quality of life improves. After all, it means that uninteresting QR Code isn't suitable for mediums of advertising.

• Korean Journal of Materials Research
• /
• v.8 no.7
• /
• pp.634-640
• /
• 1998

A well- shaped trench was investigated in view of the defect distribution along trench sidewall and bottom using high resolution transmission electron microscopy. The trench was formed by HBr plasma and additive gases in magnetically enhanced reactive ion etching system. Adding $0_2$ and other additive gases into HBr plasma makes it possible to eliminate sidewall undercut and lower surface roughness by forming the passivation layer of lateral etching, resulted in the well filled trench with oxide and polysilicon by subsequent deposition. The passivation layer of lateral etching was mainly composed of $SiO_xF_y$ $SiO_xBr_y$ confirmed by chemical analysis. It also affects the generation and distribution of lattice defects. Most of etch induced defects were found in the edge region of the trench bottom within the depth of 10$\AA$. They are generally decreased with the thickness of residue layer and almost disappeared below the uni¬formly thick residue layer. While the formation of crystalline defects in silicon substrate mainly depends on the incident angle and energy of etch species, the region of surface defects on the thickness of residue layer formed during trench etching.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.186-193
• /
• 1996

Several chitosan beads were prepared by W/O emulsion and capillary extrusion methods. The surface structures were observed through SEM pictures, the surface areas were determined by BET method, the available amine contents were measured by picric acid titration method, and the results were correlated each other. The beads from W/O emulsion method were smaller in size but had higher hardness, surface area, and available amine contents than the ones from capillary extrusion method. Moreover, the surface area, available amine contents, apparent density and the hardness showed large differences according to the drying processes. As compared between the solvent dehydration and the freeze drying technique in W/O emulsion method, the former showed higher surface area, higher available amine contents and hardness than the latter. SEM pictures revealed that in case of solvent dehydration method, very small pores existed, whereas in case of freeze drying method, cell-like pores existed on the surface. The results of picric acid titration showed that the beads dried by solvent dehydration method were 10 times higher in amine contents than those from freeze drying method, and the amount of amine contents were increased as the surface area was increased. After fluorescamine was reacted with chitosan beads, the fluorescence labeled beads were observed through fluorescence microscope. The results showed that most of primary amine existed on the surface of beads and pores.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.114-125
• /
• 2009

In this study, a design value analysis technique that considered stochastic LCC and stochastic performance evaluation was proposed, and by introducing the concept of reliability analysis, a decision making that secured reliability was supported. The results of this study, which was carried out according to the above objectives and methods, are summarized as follows: 1) The design value analysis procedures and value state function, improved in order to carry out a reliable analysis when evaluating alternate proposals that were extracted after the function definition was complete, were formalized, and in order to secure consistency and efficiency for value evaluation procedures, an evaluation index scheme was proposed; 2) Database collection and analysis were done for a bridge's LCC analysis. As for the collection scope of data, literature of previous research done on a bridge's LCC analysis was used as the basis for analysis, and for securing reliability regarding analysis results and dealing with uncertainty of collected data, the MCS technique was applied; 3) Weights and evaluation ranks for performance evaluation of each of the alternate proposals, as well as LCC analysis model, analysis period, discount rate, user expense, safety inspection and safety diagnosis expense conditions for LCC analysis were proposed. Lastly, a feasibility study was done and conclusion was made about "OO grand bridge and connecting road construction work execution design" project centered on value analysis execution case.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.126-134
• /
• 2002

Fabrication of mortar containing fly ash for high strength structural material was investigated by using a Mechanochemically Processed Cement (MPC) and/or Fly Ash (MPFA), which was compared to the specimen (at the same fabrication condition of fly ash adding contents (10, 20 and 30 wt%) and curing time (7 and 28 days)) fabricated by using Ball-mill Processed Cement (BPC) and As Received Fly Ash (ARFA) in terms with compressive strength and microstructures. Mortar specimen fabricated by using MPC and ARFA showed 5-11% higher compressive strength than that in the case of using BPC and ARFA, and mortar specimen by using BPC and MPFA represented 10-20% higher compressive strength than that for the case of using BPC and ARFA. Furthermore, mortar specimen fabricated by simultaneously using MPC and MPFA exhibited about 24% higher value of compressive strength than that for the case of using BPC and ARFA, which was considered to be synergic efficiency in increasing compressive strength. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity between cement and fly ash induced during mechanochemical Processing(MP).