• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.466-471
• /
• 2007

Conventional thresholding methods including Otsu's thresholding method are based on the gray levels frequency histogram. But the gray levels frequency histogram is obtained by recomposing only frequency information from an input image, where frequency histogram dose not contain any other informations such as the distribution of gray levels and relation between gray levels. Therefore the methods using the gray levels frequency histogram occasionally present inappropriate threshold values because it cannot reflect informations of the given image sufficiently. In this paper, we define a correlation function of gray levels and propose a novel thresholding method using the gray levels frequency histogram and the spatial correlation information. The effectiveness of the proposed method will be shown through comparison with Otsu's thresholding method.

• Proceedings of the KSRS Conference
• /
• 2001.03a
• /
• pp.42-48
• /
• 2001

오늘날 원격탐사와 GIS를 이용한 시·공간적 분석은 인간활동에서부터 자연환경에 이르기까지 다양한 정보를 추출하기 위한 기법으로 자주 사용되고 있다. 본 연구는 위성원격 탐사자료와 GIS를 활용하여 시기별 도시지역에서의 열 분포 특성을 추출하여 토지피복과의 상관관계를 시·공간적으로 해석하였다. 이를 위하여 세 시기간 도시 열 분포의 특성을 도시성장과 함께 해석함과 동시에 보다 명확 하게 규명하기 위하여 Landsat TM band 6의 DN value를 이용한 지표온도 추출에 있어서 NASA 모델을 활용하여 대구시 주변지역 8개 지점의 AWS 실측 값과 서로 상관 분석한 결 과 평균 0.85의 상관정도를 얻었다. 또한 토지피복분류를 통하여 도시성장에 따른 열 분포 및 식생지수의 변화를 시·공간적으로 해석하기 위하여 1,000지점에서 sample 자료를 추출 하여 지형특성별 열 분포의 패턴을 분석하였다. 이와 같은 결과는 향후 도시환경 특성을 고 려한 환경 친화적인 도시계획수립에 있어서 중요한 인자로 작용할 것으로 사료된다.

• The KIPS Transactions:PartB
• /
• v.8B no.2
• /
• pp.208-214
• /
• 2001

웨이블릿을 이용한 분해와 복원은 영상의 압축에 널리 사용되는 도구이다. 웨이블릿 분해된자연 영상은 원 영상의 동일 부분을 표현하는 대역간의 계수 값 사이에 높은 상관관계를 갖고 있고, 하나의 대역 안의 인접한 계수들 사이에도 높은 상관 관계를 갖고 있다. EZW(Evbedded Zerotree Wavelet)나 SPIHT(Set Partitioning in Hierachical Trees)과 같이 성능이 우수하고 널리 사용되는 웨이블릿 기반 영상 압축은 웨이블릿 계수의 대역간 상관 관계를 이용하고 있다. Zero Tree에 기초한 이와 같은 방법들은 계수값의 부모 후손 관계를 이용하기 때문에 대역별 부호화를 수행할 수 없으며, 다중 해상도 복원이 필요한 응용 분야에 효과적으로 적용되어지지 못한다. 본 논문에서는 하나의 대역 내에서 인접한 계수들 간의 상관성을 이용한 대역 독립적 부호화 기법을 제안한다. 압축 성능은 SPIHT과 대등하거나 약간 우수한 것으로 나타났고, 다중해상도 복원에 효과적으로 적용할 수 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.86-93
• /
• 2008

The Galileo system, a global navigation satellite system(GNSS) developed by E.U., uses the direct sequence/spread spectrum(DS/SS) modulation. A DS/SS-based system performs a fine synchronization between the received and locally generated spreading signals, via attacking process. In the absence of multipath signals, using the symmetric characteristic of the correlation function, the delay lock loop with the early minus late discriminator(EL-DLL) offers the best performance in tracking. However, in the presence of multipath signals, the symmetry of the correlation function could be lost, causing a tracking bias. In this paper, we observe that the correlation values in the advanced offset range remain almost unchanged, due to the multipath signals being received later than a line-of-sight signal. Based on this observation, we propose a novel tracking scheme for a Galileo BOC(1,1) system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1894-1897
• /
• 2009

최근 개발된 표면영상유속계(Surface Image Velocimetry)를 이용한 유량측정기법은 비교적 짧은 시간에 급변하는 홍수량을 정확도를 유지하면서도 간편하고 안전하게 측정할 수 있다는 장점이 있다. 그러나 표면영상유속계는 현장 상황과 사용 방법에 따라 측정된 유속값의 오차가 얼마나 발생하는지에 대한 근거가 없으며, 그 오차 범위가 명확하게 제시된 바가 없기 때문에 표면영상유속계의 신뢰성에 대해 의구심을 갖는 경우가 많다. 표면영상유속계의 유속측정 원리는 일정 시간간격을 갖는 두 영상내의 입자군 이동을 추적하여 유속벡터를 산정하는 것이다. 즉, 두 영상의 탐색 영역(searching area)내에서 각 입자군의 상관계수를 계산하여 최대상관계수를 갖는 입자군을 동일 입자군으로 판별하고, 동일 입자군의 도심간 거리와 두 영상의 시간간격을 이용하여 유속을 구하게 된다. 그러므로 상관계수가 높을수록 유속값이 정확하다고 할 수 있다. 따라서 본 연구에서는 상관계수에 따른 유속측정 오차를 분석하여 상관계수에 따른 표면영상유속계의 오차범위를 결정하고자 한다. 분석방법은 활차의 속도와 영상분석을 통해 얻은 속도를 비교하여 상관계수에 따른 오차범위를 살펴보았고, 실제 적용을 위하여 개수로내의 표면유속를 측정하여 상관계수에 따른 오차를 분석하였다. 분석 결과 상관계수가 0.7 이상인 측정유속의 정확도는 10% 이내로 확인되었으며, 향후 표면영상 유속계를 이용한 유속측정시 상관계수별 오차범위를 이용하여 현장적용시 정확도 개선을 위해 많은 도움이 될 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.20-29
• /
• 2022

The operational modal analysis (OMA) technique, which extracts the modal parameters of a structural system using ambient vibrations, has been actively developed as a field of structural health monitoring of cable-supported bridges. In this paper, the short and long-term modal parameters of a cable-stayed bridge were evaluated using the acceleration data obtained from the two ambient vibration tests (AVTs) and three years of continuous measurements. A total of 27 vertical modes and 1 lateral mode in the range 0.1 ~ 2.5 Hz were extracted from the high-resolution AVTs which were conducted in the 6th and 19th years after its completion. Existing OMA methods such as Peak-Picking (PP), Eigensystem Realization Algorithm with Data Correlation (ERADC), Frequency Domain Decomposition (FDD) and Time Domain Decomposition (TDD) were applied for modal parameters extraction, and it was confirmed that there was no significant difference between the applied methods. From the correlation analysis between long-term natural frequencies and environmental factors, it was confirmed that temperature change is the dominant factor influencing natural frequency fluctuations. It was revealed that the decreased natural frequencies of the bridge were not due to changes in structural performance and integrity, but to the environmental effects caused by the temperature difference between the two AVTs. In addition, when the TDD technique is applied, the accuracy of extracted mode shapes is improved by adding a proposed algorithm that normalizes the sequence so that the autocorrelations at zero lag equal 1.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.1
• /
• pp.5-14
• /
• 2018

All kinds of monitoring data in construction site could have outlier created from diverse cause. In this study generation technique of synthesis value, its regression, final outlier detection and assessment are conducted to distinct outlier data included in extensive time series dataset. Synthesis value having weight factor of correlation between a number of datasets consist of many monitoring data enable to detect outlier by increasing its correlation. Standard artificial dataset in which intentional outliers are inserted has been used for assessment of synthesis value technique. These results showed increase of detection accuracy for outlier and general tendency in case of having different time series models in common. Accuracy of outlier detection increased in case of using more dataset and showing similar time series pattern.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.267-277
• /
• 1999

The pushover analysis technique is now attracting the world-wide interest for the prediction of elastic and inelastic behavior of structures in the seismic evaluation of existing buildings. However, the reliability of this analysis technique has not been fully checked by the test results in the case of structures with nonseismic details. The objective of this study is to verify the correlation between the experimental and analytical responses of a 1:12 scale 10-story reinforced concrete frame with non-seismic details by using DRAIN-2DX program and the test results performed previously. It is concluded from this comparison that the overall responses such as the relations between story shear versus interstory drift and the local deformations such as plastic rotations can be predicted with quite high reliability.

• Explosives and Blasting
• /
• v.37 no.4
• /
• pp.1-9
• /
• 2019

In this study the applicability of a Digital Image Correlation (DIC) method was investigated by measuring the displacement and vibration of rock pillar due to underground mining blasting. When combined with a high speed photography technology, the DIC method provides an excellent photographic image processing ability that can be used to convert the evolving full-field surface properties of structures to 2D or 3D set of coordinate values. The measured coordinate sets are then used to calculate the displacement, strain, and velocity of the target structure. This technique is widely used in science and engineering, and continuously finds its new application areas. In this study, the DIC system and the conventional seismograph were compared for their ability to measure the displacement and vibration produced by blasting. In the field test both methods showed similar results. Thus, it is concluded that the DIC method is feasible to measure the ground displacements and vibrations from blasting.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.692-698
• /
• 2009

Wavelet transform has been widely used in terms that it may overcome the shortcoming of conventional Fourier transform. Fourier transform has its difficulty to explain how the transformed domain, frequency, is related with time. Traditional semblance technique in Fourier transform was devised to compare two time series on the basis of their phase as a function of frequency. But this method is known not to work well for the non-stationary signal. In this study, we present two applications of the wavelet-based semblance method to geophysical data. Firstly, we show filtered geomagnetic signal remained with components of high correlation to each observatory. Secondly, highly correlated residual signal of gravity and magnetic survey data, which are also filtered by this semblance method, is present.