• Journal of the Korean Geotechnical Society
• /
• v.39 no.1
• /
• pp.15-25
• /
• 2023

Recent weather changes have led to an increase in heavy rainfall resulting in frequent large-scale slope failures. To minimize damage to life and property, a measurement system is used in slope failure warning systems. However, understanding the slope failure behavior is difficult as the measurement system only measures a specific point. Therefore, numerical analysis must be p erformed with the measurement system. The soil water characteristic curve (SWCC) drying curve and boundary conditions that consider evapotranspiration and precipitation have been applied to numerical analysis, but the hysteresis of SWCC affects the numerical analysis results. To address this, a new evapotranspiration calculation method is proposed and applied to boundary conditions, and the measurement data are compared with the results of the numerical analysis. This method takes into account the different infiltration behaviors on evapotranspiration according to the drying and wetting curves of the SWCC, and allows for a more rational prediction of water movement on unsaturated slopes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.243-248
• /
• 2008

Moisture damage of asphalt pavements can usually occur because of the loss of adhesion and cohesion between the asphalt binder and aggregate in the asphalt mixture due to presence of water. And this is one of the causes that is effect on the main distress of asphalt pavement. The objective of this study is to find out moisture damage characteristics of asphalt pavement. Effects of this study changes of the material properties and resistance characteristics of moisture damage on the asphalt mixtures under various temperatures and repeated immersion using indirect tensile test and modify Lottman test were evaluated during this study. The asphalt mixtures were produced using straight asphalt binder, SBS modified asphalt binder and aggregates. The material properties (resilient modulus, indirect tensile strength, failure energy and $DCSE_f$) of the asphalt mixtures were generally decreased with increasing to moisture damage caused by the number of repeated immersion. The decrease ratios of material properties by repeated immersion on SBS modified asphalt mixtures were lower than those of straight asphalt mixtures at all three test temperatures. As a conclusion, current criterion for evaluation moisture damage of asphalt mixtures is difficult for using distinction standard because of the limited evaluation criterion with one time immersion and single material property. Based on this research, to evaluate long term moisture damage on asphalt mixtures, material property tests of various kinds with repeated immersion test are considered.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3C
• /
• pp.179-186
• /
• 2008

Pressuremeter test estimates the deformational properties of soil from the relationship between applied pressure and the displacement of cavity wall. It is general to utilize the reloading curve for the estimation of deformational properties of soil because the initial loading curve can be affected by the disturbance caused by boring. On the other hand, the instrumental resolution or the variation of measured data makes it hard to estimate the maximum shear modulus from pressuremeter test results. This study suggested the methodology estimating the maximum shear modulus from pressuremeter test directly, based on the curve fitting of reloading curve. In addition, the difference was taken into account between the stress state around the probe in reloading and that of the in-situ state. Pressuremeter tests were conducted for 15 cases using a large calibration chamber, together with a number of reference tests. The maximum shear moduli taken from suggested method were compared with those from empirical correlation and bender element test.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.174-181
• /
• 2023

Five local governments along the Korea-Japan Sea (Jeju, Jeonnam, Gyeongnam, Busan, Ulsan) operate a joint countermeasure committee regarding the marine discharge of contaminated water from the Fukushima nuclear power plant by Japan's Tokyo Electric Power Plant. This study compared and analyzed citizen surveys, response strategies, and detailed action plans conducted by the Jeju Research Institute, Busan Research Institute, and Ulsan Research Institute as part of a study on countermeasures for the marine discharge of contaminated water from the Fukushima nuclear power plant in Japan. The purpose was to present basic data for the preparation of effective measures. As a result of the perception survey, all citizens of local governments showed a strong negative perception of marine discharge regardless of scientific research results, and it is expected that future fisheries and tourism industries will suffer great damage. In response strategies for each local government, building a control tower was found to be the most urgent task common to all local governments. It is judged that this is because it is necessary to break away from the organization-centered system and to respond to the function-centered system for effective response. In terms of response methods, while Jeju and Busan established response plans for each sector, Ulsan City focused on practical responses with step-by-step response measures according to the release time. In terms of content, the establishment of a marine product radiation inspection system and publicity to relieve public anxiety were important. As the marine discharge of contaminated water from the Fukushima nuclear power plant is scheduled to continue until 2030, strengthening the network for sharing research results and achievements among local government research institutes was deemed necessary.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.687-693
• /
• 2006

Image co-registration is the process of overlaying two images of the same scene, one of which represents a reference image, while the other is geometrically transformed to the one. In order to improve efficiency and effectiveness of the co-registration approach, the author proposed a pre-qualified area matching algorithm which is composed of feature extraction with canny operator and area matching algorithm with cross correlation coefficient. For refining matching points, outlier detection using studentized residual was used and iteratively removes outliers at the level of three standard deviation. Throughout the pre-qualification and the refining processes, the computation time was significantly improved and the registration accuracy is enhanced. A prototype of the proposed algorithm was implemented and the performance test of 3 Landsat images of Korea. showed: (1) average RMSE error of the approach was 0.435 pixel; (2) the average number of matching points was over 25,573; (3) the average processing time was 4.2 min per image with a regular workstation equipped with a 3 GHz Intel Pentium 4 CPU and 1 Gbytes Ram. The proposed approach achieved robustness, full automation, and time efficiency.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.71-83
• /
• 2009

Shotcrete is an important primary support for tunnelling in rock. The quality control of shotcrete is a core issue in the safe construction and maintenance of tunnels. Although shotcrete may be applied well initially onto excavated rock surfaces, it is affected by blasting, rock deformation and shrinkage and can debond from the excavated surface, causing problems such as corrosion, buckling, fracturing and the creation of internal voids. This study suggests an effective non-destructive evaluation method of the tunnel shotcrete bonding state applied onto hard rocks using the impact-echo (IE) method and ground penetration radar (GPR). To verify previous numerical simulation results, experimental study carried out. Generally, the bonding state of shotcrete can be classified into void, debonded, and fully bonded. In the laboratory, three different bonding conditions were modeled. The signals obtained from the experimental IE tests were analyzed at the time domain, frequency domain, and time-frequency domain (i.e., the Short- Time Fourier transform). For all cases in the analyses, the experimental test results were in good agreement with the previous numerical simulation results, verifying this approach. Both the numerical and experimental results suggest that the bonding state of shotcrete can be evaluated through changes in the resonance frequency and geometric damping ratio in a frequency domain analysis, and through changes in the contour shape and correlation coefficient in a time-frequency analysis: as the bonding state worsens in hard rock condition, the autospectral density increases, the geometric damping ratio decreases, and the contour shape in the time-frequency domain has a long tail parallel to the time axis. The correlation coefficient can be effectively applied for a quantitative evaluation of bonding state of tunnel shotcrete. Finally, the bonding state of shotcrete can be successfully evaluated based on the process suggested in this study.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.1
• /
• pp.62-67
• /
• 2008

This study was conducted to evaluate characteristic of breadmaking for white bread with fermented rice bran (FRB) (5 to 20%). In proximate composition analysis of FRB which was contained 38.72% moisture, 11.06% crude protein, 17.38% crude fat, 12.74% crude fiber and 11.85% ash. The degree of dough fermentation and dough pH tended to decrease depending on the degree of FRB powder, but there were no significant differences between control group and 5% FRB adding group. In bread weight and volume analysis, bread weight was decreased but bread volume was increased with FRB powder adding degrees. The color of crumb became darker according to the addition of FRB powder, but redness and yellowness were increased. The hardness, gumminess and brittleness of white bread showed a tendency to increase while cohesiveness and springness was decreased. In sensory analysis, FRB group showed generally low scores in color, flavor, texture, taste, overall acceptability except for 5% FRB adding group which showed similar results with control group. Taken together, FRB could be used as a nutrition improvement for breadmaking and a suitable FRB adding volume for breadmaking is 5%.

• 한국노년학
• /
• v.25 no.2
• /
• pp.143-154
• /
• 2005

This study was conducted to examine the environmental status, FIM(Function Independence Measure), Illness intrusiveness of home stayed stroke patients. Data were collected on 145 patients living in K city and the neighborhood located in southern part of Korea. The data were analyzed by means of SPSS program. Results : In assessment of environmental safety, 46.2%(67) felt unsafe around their residential area. The most dangerous facilities in their residence was stairs(58.2%), gas/electric facilities(14.9%). For sanitary problems, 28.2%(41) felt they have problems at their home. The most important problems were outdoor polluted toilet(22.0%) and scattered and dirty residential circumstances(22.0%). The average FIM score was 74.52(4.14) of total score 126(7). In motor area FIM was lowest at stair walking(3.01) and bathing(3.16). In cognitive area FIM was lowest at social activities(3.36). The mean score of Illness intrusiveness was 58.86(4.52) of total score 91(7). The major area largely impacted by stroke were health(5.61), working(5.68), active leisure activities(5.56). There was significant reverse correlation between FIM and illness intrusiveness(r=-0.66, p=0.00). Conclusion : It was needed environmental improvement and rehabilitation program for stroke patients, and repeated follow up study.

• 한국노년학
• /
• v.25 no.2
• /
• pp.35-52
• /
• 2005

This study attempts to develop the scale of 'Successful Aging' for Korean elderly. It follows fives: (1)developing 105 items based on the literature reviews, (2)performing the 1st survey to confirm and reduce items, (3)verifying the content validity through the professional group and the elderly focused group, (4)performing the 2nd survey to explore the factors of 'Successful Aging' and (5)performing the 3rd survey to identify the construct validity and concurrent validity. The scale constructs four factors with 30 items. The four factors are confirmed : (1)self efficacy, (2)satisfaction with adult children's success, (3)couple life like companion, (4)self control. The reliability of this scale is 0.94 and the relationship between the items and each factor are statistically significant by the confirmatory factor analysis. Thus, the content validity is verified. Also the correlation with the successful aging and the life satisfaction is 0.69 and then the concurrent validity is verified. This 'Successful Aging Scale' for Korean elderly will contribute to use as the socio-metrics at the welfare practice for aging.

• 한국노년학
• /
• v.31 no.3
• /
• pp.479-487
• /
• 2011

This study was a descriptive study to investigate factors affecting quality of life in the Korean elders with diabetes mellitus. A secondary data analysis was conducted using the data of "The Fourth Korea National Health and Nutrition Examination Survey, 2008." The survey included 9774 adults aged over 64 years with diabetes mellitus and 226 samples were used for this study. Data analysis was conducted using SPSS 12.0 program and descriptive statistics, Pearson's correlations, and multiple regression analyses were performed. Correlation analysis showed that quality of life was associated with the amount of alcohol intake, the level of stress awareness, walking time, and suicidal thoughts. The amount of alcohol intake, the level of stress awareness, walking time, and suicidal thoughts accounted for 34.5% of quality of life. These findings suggest that nursing researchers need to consider age, suicidal thoughts, and drinking as important factors affecting quality of life of Korean elders with diabetes mellitus and nursing intervention focusing on the issues needs to be developed.