• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.271-272
• /
• 2019

본 논문은 친환경 전기차용에 적용되는 있는 고밀도 LDC(Low-Voltage DC-DC Converter) 전력변환장치의 PCB구조와 스위칭소자에 따른 PCB의 발열특성을 해석한다. 전력변환장치 PCB사이에 알루미늄 플레이트를 적용하여 다면 방열경로를 통한 PCB방열특성을 비교하고, 또한 기존 Si-FET와 낮은 온 상태 도통저항을 가지는 GaN-FET 반도체디바이스를 적용한 전력변환장치의 PCB 방열특성을 시뮬레이션을 통해 비교 및 검토하였다.

• Transactions of Materials Processing
• /
• v.30 no.2
• /
• pp.74-82
• /
• 2021

Stretch-flangeability, which is the ability of sheet steels to be deformed into complex shapes, is a critical formability property in automobile body parts. In this study, the center-hole for hole expansion test, which is normally used to evaluate the stretch-flangeability of sheet steels, was prepared by both punching and electrical discharge machining (EDM) methods. Hole expansion ratio (HER) of punched hole was far lower than the HER of EDM drilled hole because of damage/crack in hole-edge due to punching process. The effect of hole-edge condition on HER was quantified by mechanical, fractographic and geometric factors. Based on these factors, the empirical equation used to determine HER for various sheet steels was derived using non-linear regression.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.419-428
• /
• 1986

While three most important aspects of line codes are the de-free, the minimum-bandwidth, and the self-clocking properties, the only TIBr, VMDBr, RMD3r, RMD4r codes possess all of these properties. This paper is to report the results of an experimental performance study of VMDB5. The encoder and decoder of VMDB5 and the pulse shaper have been inplemented. Power spectra, eye patterns, and error probabilities are experimentally measured, confirming the theoreticla performance predictions. It has been observed that the NRZ pulse shaping reliable transmission is possible with no extra equalization even in teh case when the -3dB channel bandwith is only half the Nyquist bandwidth.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.2
• /
• pp.315-323
• /
• 1987

Generally, general-purpose image processing system is so expensive that not so many users easily can access the system. In this paper attemps have been made to design and describe a general and economical image processing system for real-time aplications such as image data compression, pattern recognition and target tracking. The system comprises an operator console, image data acquisition/display sistem and IBM PC/XT. The system also utilizes a high speed Fairchild 16-bit microprocessor with ALU speed of 375 nsec for system control, algrithm execution and user computation. The system also can digitize /display a 256x 256x 8 bit image in real time and store two frames of images. All image pixels are directly accessible by the microprocessor for fast and efficient computation. Some experimental and illustrative results such as target tracking are presented to show the efficient performance of the system.

• Journal of the Korean Society for information Management
• /
• v.39 no.1
• /
• pp.257-280
• /
• 2022

In this study, we analyzed comments on news articles of representative companies of the three industries (i.e., semiconductor, secondary battery, and bio industries) that had been listed as national strategic technology projects of South Korea to identify public opinions towards them. In addition, we analyzed the relationship between changes in public opinion and stock price. 'Samsung Electronics' and 'SK Hynix' in the semiconductor industry, 'Samsung SDI' and 'LG Chem' in the secondary battery industry, and 'Samsung Biologics' and 'Celltrion' in the bio-industry were selected as the representative companies and 47,452 comments of news articles about the companies that had been published from January 1, 2020, to December 31, 2020, were collected from Naver News. The comments were grouped into positive, neutral, and negative emotions, and the dynamic topics of comments over time in each group were analyzed to identify the trends of public opinion in each industry. As a result, in the case of the semiconductor industry, investment, COVID-19 related issues, trust in large companies such as Samsung Electronics, and mention of the damage caused by changes in government policy were the topics. In the case of secondary battery industries, references to investment, battery, and corporate issues were the topics. In the case of bio-industries, references to investment, COVID-19 related issues, and corporate issues were the topics. Next, to understand whether the sentiment of the comments is related to the actual stock price, for each company, the changes in the stock price and the sentiment values of the comments were compared and analyzed using visual analytics. As a result, we found a clear relationship between the changes in the sentiment value of public opinion and the stock price through the similar patterns shown in the change graphs. This study analyzed comments on news articles that are highly related to stock price, identified changes in public opinion trends in the COVID-19 era, and provided objective feedback to government agencies' policymaking.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.5-62
• /
• 2018

Over the last 10 years, the fight against occupational diseases of semiconductor workers led by SHARPS(the Supporters for the Health And Rights of People in the Semiconductor industry, NGO) has accomplished considerable achievements, especially in the legal and institutional aspects. First, the court and the government accepted the claims that 24 injured workers respectively filed, recognizing their 10 types of diseases as occupational illness. The court not only expanded the list of work places and diseases that it recognized, but also presented more progressive logic of recognition. The most remarkable achievement among them is the case ruled by the Supreme court in July, 2017. In terms of 'worker's right to know', which is the most important factor in preventing occupational diseases, there have been significant legislative bills, court rulings and government guidelines. The revised bill of the Industrial Safety and Health Act to strengthen workers' rights to know and to introduce the pre-review system on trade secret is currently under review by the National Assembly. The court recently ruled that the government should disclose its inspection results on safety and health management at semiconductor factories. The ministry of labor has drawn up internal guidelines to more actively open its safety and health data to public. This study looks over recent developments in such rulings, bills and guidelines and then, analyzes their implications, laying the groundwork for future actions for worker health in the electronic industry.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.63-68
• /
• 2002

JPEG2000은 기존의 정지영상압축부호화 방식에 비해 우수한 비트율-왜곡(Rate-Distortion)특성과 향상된 주관적 화질을 제공하며 인터넷, 디지털 영상카메라, 이동단말기, 의학영상 등 다양한 분야에서 적용될 수 있는 새로운 정지영상압축 표준이다. 본 논문에서는 SoC(System on a Chip)설계를 고려한 JPEG2000 인코더의 구조를 제안하고 IP(Intellectual Property)를 설계 및 검증하였다. 구현된 JPEG2000 IP는 DWT(Discrete Wavelet Transform)블록, 스칼라양자화블록, EBCOT(Embedded Block Coding with Optimized Truncation)블록으로 구성되어 있다. IP는 모의실험을 통해 구현 구조에 대한 타당성을 검증하였고, 반도체설계자산연구센터에서 제시한 'RTL Coding Guideline'에 따라 HDL을 설계하였다. 특히, DWT블록은 구현시 많은 연산과 메모리 용량이 필요하므로 영상을 저장할 외부 메모리를 사용하였고, 빠른 곱셈과 덧셈연산을 위한 3단 파이프라인 부스곱셈기(3-state pipeline booth multiplier)와 캐리예측 덧셈기(carry lookahead adder)를 사용하였다. 설계된 JPEG2000 IP들은 삼성 0.35$\mu\textrm{m}$ 라이브러리를 이용하여 Synopsys사 Design Analyzer 틀을 통해 논리 합성하였으며, Xillinx 100만 게이트 FPGA칩에 구현하여 그 동작을 검증하였다. 또한, Hard IP 설계를 위해 Avanti사의 Apollo툴을 이용하여 Layout을 수행하였다.

• Journal of Technology Innovation
• /
• v.18 no.2
• /
• pp.175-219
• /
• 2010

Since diversification can be a necessary means for company's survival and the conservation of its success, hundreds of studies have been done by three schools of industrial economics, strategic management, and Neo-Schumpeterian economics for over 30 years. However, any school has not presented a model comprehensively explaining diversification' success or failure. The study tried to suggest a theoretical framework integrating findings came from three schools. The framework considers both firm's technological capabilities and sector-specific characteristics as well as reflects a Neo-Schumpeterian view emphasizing technological aspects. The goal of the study is finding major reasons of success and failure during company's diversification through studying three diversification cases of Samsung. Our findings show that the diversification toward TFT-LCD was easier and more successful than the diversification toward microprocessor because DRAM is more similar to TFT-LCD than microprocessor. Samsung also tended to build only the types of capabilities which were originated from capabilities accumulated in DRAM business. Our findings give firm's strategists a lesson that they can increase the probability of success in diversification, if only they should simultaneously consider a new sector's characteristics, a firm's technological capabilities accumulated in old sectors, and the availability of old capabilities for being applied to a new sector.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2009

Requirement level regarding processing and managing real-time datastream in an ubiquitous environment is increased. Especially, due to the unbounded, high frequency and real-time characteristics of datastream, development of specialized stroge manager for DSMS is necessary to process such datastream. Existing DSMS, e.g. Coral8, can support datastream processing but it is not scalable and cannot perform well when handling large-volume real-time datastream, e.g. 100 thousand over per second. In the case of Oracle10g, which is generally used in related field, it supports storing and management processing. However, it does not support real-time datastream processing. In this paper, we propose specialized storage manager of DSMS for real-time compressed storing on semiconductor or LCD production facility of Samsung electronics, Hynix and HP. Hynix and HP. This paper describes the proposed system architecture and major components and show better performance of the proposed system compared with similar systems in the experiment section.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.2
• /
• pp.125-133
• /
• 2024

Objectives: The aim of this study is to develop a comprehensive Occupational Safety and Health (OSH) guide for maintenance tasks in semiconductor processing, specifically focusing on etching, deposition, and ion implantation processes. Methods: The development of the OSH guide involved a literature review, consultations with industry experts, and field investigations. It concentrates on Maintenance Work (MW) operations in these specialized areas. Results: The result is a detailed OSH guide tailored to MW in etching, deposition, and ion implantation facilities within semiconductor processing. This guide is structured to assist maintenance workers through pre-, during and post-MW phases, ensuring easy comprehension and adherence to safety protocols. It highlights the necessity of safety and health measures throughout the MW process to protect personnel. The guide is enriched with real-life scenarios and visual aids, including cartoons and photographs, to aid in the understanding and implementation of safety and health principles. Conclusions: This OSH guide is designed to enhance the protection of workers engaged in maintenance activities in the electronics sector, particularly in semiconductor manufacturing. It aims to improve compliance with safety and health standards in these high-risk environments.