• Resources Recycling
• /
• v.4 no.3
• /
• pp.2-9
• /
• 1995

The rccoverg and separation pracess of nikcl, vanadium and molybdenum from spent dcsulfilrizing catalyst ofpetrochemical rndustries was studied. Tnis process was canied out wet process which is consist of roasting, ammonialeaching and solve111 exDaction techniqcs. The metal ions of NI, V and Mo as vduable compollents were treated byroasting them a1 low lernperatuc, 400$^{\circ}$C in first dep, and then dlssah'ed nu1 at 80$^{\circ}$C wlth ammonium cabonate mlulion.Aftcr cooling them a1 room tempertaure, vanadium wa rccavered from mathcr iiquur in thc f n m of precipitate, sodiumvanadales The Secand slep, roasting the catalyst which is added sodium carbonate ul IOOO"C, was employed. Leachingwith distilled ~ a l e rga ve a iwo phase resultant, solutio~c~a ntaning Ni, V and Mo and solid residue containing sibca,alurmniu~n and iron. A solvcnt exlclction technique uslng vvriuus extractanls, MSP-8, TOIUC, LIX64Pi was eflecnve farthc extraclion and scparation ol thrcc mcfals from thc ammonical 11qou1 thc ammonical 11qou1.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.67-73
• /
• 2011

In this study, for recovery of renewable noble metal from used stack of fuel cell, synthesis of platinum nano particle is established through effect of platinum solution concentration, pH value, reducing agent and dispersing agent at a volume ratio of 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm and 10min. Less than 5 nm platinum particles were synthesized using Pt leaching solution from used MEA of stack under same condition of method using simulated Pt solution. The characteristics of synthesized nano particles was illustrated by XPS analysis as the reduction of platinum ions into platinum metals(zero-valent).

• Applied Chemistry for Engineering
• /
• v.22 no.6
• /
• pp.642-647
• /
• 2011

The fabrication characteristics of porous uranium oxide granules from $U_3O_8$ powder was investigated in terms of initial particle bed motions such as slumping and rolling, thermal treatment conditions, and rotational velocities in slumping motion using a rotary voloxidizer. With respect to the initial particle bed motion the recovery rate of granule of above 1 mm in slumping motion was higher than that in the rolling motion. Rolling motion was changed into slumping motion with high slumping frequency by formation of granules from fine particles. Recovery rate of granule significantly increased with the increas in thermal treatment temperature and time of upto 10 h. As the rotational velocity of voloxidizer in the case of the initial particle bed showing slumping motion increased, the recovery rate of granule increased from 81.5 to 88.7%. However, the rotational velocity of 2 rpm provided an effective density, crushing strength and sphericity of granules.

• Membrane Journal
• /
• v.32 no.3
• /
• pp.191-197
• /
• 2022

Ammonia nitrogen can be effectively recovered from livestock manure waste, etc. by using the gas permeable membrane technology. In this case, ammonia gas in the waste passes through the pores in one-side of membrane, impregnated in waste, and then reach the opposite side of the membrane. The permeated ammonia gas molecules are captured and recovered by acid (such as sulfuric acid) in the solution existing on the opposite side of the membrane. In order to improve ammonia nitrogen removals in the inlet part, high pH should be maintained in the feed waste including ammonia nitrogen to recover, which requires the cost of the chemical. To resolve this issue, previous studies tested various methods, for example, utilization of cheap calcium hydroxide or aeration together with inhibition of unwanted nitrification. The gas permeable membranes used for the recovery of ammonia nitrogen may be characterized, not only by proper heat and chemical resistance, but also by hydrophobicity, allowing selective ammonia gas permeation through the hydrophobic membrane pores. Future research should consider the relevant pilot or upscale processes using on-site wastes with various properties, and identify the optimal design/operation conditions as well as economic feasibility improvement plans.

• Resources Recycling
• /
• v.32 no.3
• /
• pp.3-8
• /
• 2023

This study discussed production, demand, and future prospects of rubidium, which is an alkali group metal that is highly reactive to various media and requires carefulness in handling, but no significant environmental hazard of rubidium has been reported yet. Rubidium is used in various fields such as optoelectronic equipment, biomedical, and chemical industries. Because of difficulty in production as well as limited demand, the transaction price of rubidium is relatively high, but its detail information such as market status and potential growth is uncertain. However, if the mass production of versatile ultra-high-performance equipment such as quantum computers and the necessity of rubidium use in the equipment are confirmed, there is a possibility that the rubidium market will expand in the future. Rubidium is often found together with lithium, beryllium, and cesium, and may be present in granite containing minerals such as lepidolite and pollucite, as well as in seawater and industrial waste. Several technologies such as acid leaching, roasting, solvent extraction, and adsorption are used to recover rubidium. The maximum recovery efficiency of the rubidium from the sources and the processing above is generally high, but, in many practices, rubidium is not the main recovery target, and therefore the actual recovery effects should depend on presence of other valuable components or impurities, together with recovery costs, energy consumption, environmental issues, etc. In conclusion, although the current production and consumption of rubidium are limited, with consideration of the possible market fluctuations according to the emergence of large-scale demand sources, etc., further investigations by related institutions should be necessary.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.152-158
• /
• 2003

This study was conducted to evaluate two sample digestion procedures and instrumental determination parameters for analysis of lead in bone. Amputated human legs were treated by acid digestion or microwave dissolution prior to spectrometric analysis. Inductively coupled plasma mass spectrometry (ICP-MS) and graphite furnace atomic absorption spectrometry (GF-AAS) were used for determining bone lead levels. Recovery efficiencies using standard reference material from acid digestion measured by ICP-MS were in good agreement with those of the certified value, but in cases of acid digestion by GF-AAS and microwave digestion by both two methods, recovery underestimated and overestimated, respectively. For the bone samples, the lead concentrations obtained by ICP-MS after acid digestionwere in good agreement with those by GF-AAS (correlation coefficient = 0.983), but GF-AAS gave systematically higher values than ICP-MS. While a good agreement between two analytical methods after microwave digestion was also obtained (correlation coefficient = 0.950), bone lead concentrations from microwave were relatively higher than those from acid digestion. In conclusion, the use of the simple nitric acid digestion procedure at an ambient temperature coupled to ICP-MS seems to be efficient for the determination of lead in bone in consideration for both the convenience and validity.

• Analytical Science and Technology
• /
• v.26 no.2
• /
• pp.125-134
• /
• 2013

This study was demonstrated to estimate the measurement uncertainty of 23 multiple-component amino acids from beef bone extract by high performance liquid chromatography (HPLC). The sources of measurement uncertainty (i.e. sample weight, final volume, standard weight, purity, standard solution, calibration curve, recovery and repeatability) in associated with the analysis of amino acids were evaluated. The estimation of uncertainty obtained on the GUM (Guide to the expression of uncertainty in measurement) and EURACHEM document with mathematical calculation and statistical analysis. The content of total amino acids from beef bone extract was 36.18 g/100 g and the expanded uncertainty by multiplying coverage factor (k, 2.05~2.36) was 3.81 g/100 g at a 95% confidence level. The major contributors to the measurement uncertainty were identified in the order of recovery and repeatability (25.2%), sample pretreatment (24.5%), calibration-curve (24.0%) and weight of the reference material (10.4%). Therefore, more careful experiments are required in these steps to reduce uncertainties of amino acids analysis with a better personal proficiency improvement.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.135-142
• /
• 1974

A study on the metabolism of the chemical companents of endosperm and enbryonic othans of ginseng seeds during their germination were inverstigated and the results of the changes in the contents of nitrogen conponds, carbohydrates, lipids and phosphorus conpounds are summarized as follow; 1. When a seeding grows to 5cm the fresh weight of the embryonic organ incerases 13 times compared with that of its ripened embryo veore germination and its dry weight increases 4.5 times. On the other hand, about 65% of the dry weight of the endosperm is lost. 2. During germinarion the total nitrogen content of a sedding (endosperm+embryonic organ) decreases and when the seeding grows to 5cm there is a loss of 10% of total nitrogen content. At this time, soluble nitrogen content amounts to 40~50% of the total nitrogen, a comparatively high content. 3. When theseeding grows to 5cm, the total phosphorus content decreases by 15%. During the germination period 70~75% of the total phosphorus is distributed in the embryonic orang and 25% of it is in endosperm.In the embryonic organ 35~50% of the acid soluble phosphorus is inorganic phosphorus and in the endisperm, 20~25% of the acid soluble phosphorus is inorganic phosphorus,75~80% of the organic phosphorus is contained in the endosperm. 4.One the seedling grew to 2~3cm, carbohydrates such as soluble sugars,reducong sugars,nonreducong sugars, and crude starch interconverted remarkably. 5.After stratification (just before germination) the lipid content of the endosperm is about 54% of the total weight and lipid content of the embryo is about 61%. During germination 6.81mg of the fat contained in the endosperm per seed decreases to 4.13mg while the change of fat content in the embryonic organ is not so great.

• Resources Recycling
• /
• v.25 no.3
• /
• pp.11-19
• /
• 2016

A fundamental study to recycle a Si-Sludge and waste copper nitrate solution acid solution generated by domestic electronic industries was carried out. The waste copper nitrate solution was used as the lixiviant to leach the metals like Cu, Ca, Fe, etc. from the sludge leaving Si in the residues. The effect of reaction temperature, time and pup density on the metals leaching from the sludge was investigated. To enhance the extractability of Fe, the effect of HCl, $HNO_3$ and $H_2O_2$ introduced additionally during the leaching was also examined. Considering the leaching efficiency of Fe along with Cu, the leaching conditions comprising of 200 ~ 225 g/L pulp density and $90^{\circ}C$ temperature for 30 min were optimized. Under this condition, 98.27 ~ 99.17% Cu could be dissolved in the leach liquor with the obtained purity of Si in the residues as 98.69 ~ 98.86 %. The study revealed that the leaching of Cu contained in the Si-Sludge with the waste copper nitrate solution is a plausible approach by which the obtained leach liquor can further be treated suitably to recover Cu as the high pure value-added products.

• Journal of Acupuncture Research
• /
• v.20 no.2
• /
• pp.112-122
• /
• 2003

연구 배경 및 목적 : 봉독은 항염증 등의 효과를 가지고 있다고 알려져 있지만 세포 증식과 관련된 봉독의 효과에 대한 고찰을 위해 본 연구(硏究)에서는, 봉독(蜂毒) 약침(藥鍼) 자극(刺戟)이 아세트산 유발(誘發) 통각(痛覺) 과민증(過敏症)을 가진 쥐의 치상회(齒狀回)에서의 세포(細胞) 증식(增植)과 COX2 발현(發現)에 미치는 영향(影響)에 대해 알아보고자 하였다. 실험방법 : 대조군, 아세트산 처치군, 아세트산 0.1mg/kg 봉독 처치군, 아세트산 1mg/kg 봉독처치군(n=5 in each group)의 네 군으로 나누고 해당 군에 일벌 봉독(蜂毒)(Sigma Chemical Co., St. Louis, MO, USA)을 양측 족삼리 경혈(ST36)에 주입시키고 30분 후 아세트산(100% acetic acid 1% 용액의 0.5ml)을 복강내로 주입하여 복부 긴장 회수를 세었으며, BrdU 양성, COX 2 양성 세포수를 면역 화학 조직법을 수행하여 세어 보았다. 결과 : 아세트산 처치군에서는 대조군에 비해 5 bromo 2' deoxyuridine 양성 세포의 수는 감소(減少)되며, 치상회(齒狀回)에서의 COX 2의 발현(發現)은 증강(增强)되는 것으로 보여졌다. 봉독(蜂毒) 주입(注入)은 아세트산 유발(誘發) 복부(腹部) 긴장(緊張) 횟수와 치상회(齒狀回)에서의 COX2 발현(發現)을 억제(抑制)하여, 치상회(齒狀回)에서의 세포(細胞) 증식(增植)을 증가(增加)시켰다. 결론 : 이번 결과(結果)에서 보면, 치상회(齒狀回)에서의 COX 2의 발현(發現)은 세포(細胞) 증식(增植) 억제(抑制)와 관련(關聯)되며 봉독(蜂毒)은 COX 2 발현(發現) 억제(抑制)를 통해 치상회(齒狀回)에서의 새로운 세포(細胞) 형성(形成)을 증가(增加)시킨다는 것을 알 수 있다.