• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.379-392
• /
• 2010

In these days, constructed wetlands are applied in Korea for various purposes ; post-treatment of effluent in wastewater treatment, management of stormwater and restoration of aquatic ecosystems. However, the removal mechanisms for water pollutant in constructed wetlands are not clearly understood because they are affected by climate, influent characteristics and local constraints. Therefore, this paper is focused on the process that the pollutant, especially nitrogen and phosphorus, of the wetland is removed by. In this study, the main nitrogen removal is performed by nitrification/denitrification mechanism in the rhizosphere of constructed wetlands. And the majority of the phosphorus is removed by adsorption on the substrate of wetland. However the fate of phosphorus in wetlands can be diverse depending on the Oxidation Reduction Potential(ORP), adsorption/desorption, precipitation/dissolution, microbial effect, etc.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.323-327
• /
• 2021

This paper produced SUS MASK, which is used for OLEDs, using an automatic liquid management system. The SUS MASK was tested by setting the hole diameter to 0.4 mm. The additive F300 was found to be excellent as the hole diameter was close to 0.4 mm and the error range was measured to be 0.08 on average. And as a result of measuring the weight reduction amount of CuCl2 and FeCl3 according to the change in oxidation-reduction potential (ORP), FeCl3 is relatively sensitive to ORP changes. Experiments were conducted on whether ORP (610 mV) and specific gravity (1.463) were automatically controlled while continuously etching the SUS Mask. Experimental results show that the automatic liquid management system is well controlled because the setting value is not significantly changed. After setting the hole diameter to 0.4 mm as the target, the experiment results were measured from 0.36 to 0.44. Therefore, it is expected that etching processing in the manufacturing process of SUS MASK can be improved with higher precision by applying the manufactured automatic liquid management system.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.20-34
• /
• 2006

This study was undertaken to assess the anthropogenic impact on trace metal concentrations (Zn, Cu, Pb, Cr, Ni, and Cd) of roadside sediments (N = 70) from No.7 national road within the watershed of Hoidong Reservoir in Pusan City and to estimate the potential mobility of selected metals using sequential extraction. We generally found high concentrations of metals, especially Zn, Cu and Pb, affected by anthropogenic inputs. Compared to the trace metal concentrations of uncontaminated stream sediments, arithmetic mean concentrations of roadside sediments were about 7 times higher for Cu, 4 times higher for Zn, 3 times higher for Pb and Cr and, 2 times higher for Ni and As. Speciation data on the basis of sequential extraction indicate that most of the trace metals considered do not occur in significant quantities in the exchangeable fraction, except for Cd and Ni whose exchangeable fractions are appreciable (average 29.3 and 25.8%, respectively). Other metals such as Zn (51.4%) and Pb (45.2%) are preferentially bound to the reducible fraction, and therefore they can be potentially released by a pH decrease and/or redox change. Copper is mainly found in the organic fraction, while Cd is highest in the exchangeable fraction, and Cr and Ni in the residual fraction. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Cd>Ni>Pb>Zn>Cr>Cu. Although the total concentration data showed that Zn was typically present in potentially harmful concentration levels, the data on metal partitioning indicated that Cd, Ni and Pb pose the highest potential hazard for runoff water. As potential changes of redox state and pH may remobilize the metals bound to carbonates, amorphous oxides, and/or organic matter, and may release and flush them through drain networks into the watershed of Hoidong Reservoir, careful monitoring of environmental conditions appears to be very important.

• Economic and Environmental Geology
• /
• v.43 no.1
• /
• pp.13-20
• /
• 2010

Acid mine drainage (AMD) from abandoned mine sites typically has low pH and contains high level of various heavy metals, aggravating ground- and surface water qualities and neighboring environments. This study investigated removal of heavy metals in a biological treatment system, mainly focusing on the removal by adsorption on a substrate material. Bench-scale batch experiments were performed with a mushroom compost to evaluate the adsorption characteristics of heavy metals leached out from a mine tailing sample and the role of SRB in the overall removal process. In addition, adsorption experiments were perform using an artificial AMD sample containing $Cd^{2+}$, $Cu^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ to assess adsorption capacity of the mushroom compost. The results indicated Mn leached out from mine tailing was not subject to microbial stabilization or adsorption onto mushroom compost while microbially mediated stabilization played an important role in the removal of Zn. Fe leaching significantly increased in the presence of microbes as compared to autoclaved samples, and this was attributed to dissolution of Fe minerals in the mine tailing in a response to the depletion of $Fe^{3+}$ by iron reduction bacteria. Measurement of oxidation reduction potential (ORP) and pH indicated the reactive mixture maintained reducing condition and moderate pH during the reaction. The results of the adsorption experiments involving artificial AMD sample indicated adsorption removal efficiency was greater than 90% at pH 6 condition, but it decreased at pH 3 condition.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.336-342
• /
• 2010

In a pot experiment, we studied the effect of nitrification inhibition on Fe reduction and P release in paddy soil and growth and nutrient uptake of rice plant. Recommended level of fertilizers, 6 kg N, 5 kg $P_2O_5$ and 4 kg $K_2O$ per 10a, were applied, and for N fertilizer urea, urea+N-serve, and $KNO_3$ were included. Four 30-day-old seedlings were transplanted in a waterlogged 9 L pot filled with Yuga series soil, and 3 pots were prepared in each N fertilizer treatment. Changes of soil redox potential and concentration of ${NH_4}^-$, ${NO_3}^-$, $Fe^{2+}$ and ${PO_4}^{3-}$ in soil solution at 10 cm depth were monitored, and also the growth and nutrient uptake of rice plants were measured. Concentration of ${NH_4}^+$ in soil solution was highest in urea+N-serve treatment, and followed by urea and $KNO_3$ treatments. Addition of N-serve could effectively inhibit nitrification in the soil. In the treatment of $KNO_3$, relatively higher ${NO_3}^-$ concentration was found at 10 cm depth soil. In urea+N-serve treatment redox potential was lower than -100 mV during the experiment, but in the treatment of $KNO_3$ the potential was maintained above 0 mV until ${NO_3}^-$ remaining in soil solution. Reduction of Fe(III) and solubilization of P were highly correlated with redox potential changes in the three N fertilizer treatments. Concentrations of Fe(II) and ${PO_4}^{3-}$ in soil solution at 10 cm depth were much higher in the urea+N-serve treatment. The most vigorous rice seedling growth was found in the urea treatment. Although the availability of N and P in soil was enhanced in the urea+N-serve treatment through the suppression of nitrification, excessive solubilization of Fe could limit the growth of rice plants.

• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.369-377
• /
• 1982

The technique of combined-measurement of reflectance and ellipsometric parameters was used for studying the anodic film formed on nickel surface in basic solutions. An ellipsometer was automated for transient measurements by way of modulating the plane-polarized light with the Faraday effect. Surface film was formed electrochemically by applying a potential step from the reduction potential range to the passivation range on a polished, high-purity, polycrystalline nickel specimen. From that instant, the changes in the reflectance(r) and the ellipsometric parameters(${\Delta},{\Psi}$) of the surface film were recorded by the automatic ellipsometer. Three exact simultaneous equations including these optical signals, ${\Delta},{\Psi}$ and r were solved numerically with a computer in order to determine the optical properties, n, k, and the thickness, ${\tau}$, of the surface film. From the computed results which showed dependence on pH and time, it was found that passivation of nickel can be effectively attained by surface film thinner than $15{\AA}$ and this passivation film has a small optical absorption coefficient. It seemed that a high pH environment enhances the rate of passivation and is favorable for a denser structure of the surface film. The experimental evidence is in accordance with the hypothesis that the composition of the passive film can be approximated by $Ni(OH)_2$ in the early stage of passivation and that as time passes the composition changes partially toward that of NiO through dehydration.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.289-296
• /
• 2008

Electrochemical studies were performed by a half-cell test for the nickel hydroxide (cathode) and hydrogen storage alloy(anode) electrodes for the sealed Ni-MH batteries applicable to industrial use. The electrodes were fabricated and checked a charge efficiency and an internal pressure of the battery during charge-discharge cycling. In order to reduce the internal pressure of the sealed Ni-MH battery, cyclic voltammetry (CV) were performed on the electrodes of nickel hydroxide(cathode) and hydrogen storage alloy(anode), respectively. The results of the test showed clearly the oxidation/reduction and oxygen evolution reaction in a nickel hydroxide electrode and the hydrogenation behavior of a hydrogen storage electrode. The sealed Ni-MH battery of 130Ah was fabricated by using nickel hydroxide of a high over-voltage for an oxygen gas evolution and hydrogen storage alloy of a good performance for activation The battery showed a good characteristics such as a high charge efficiency of 98% at 1 C charge current, a low level internal pressure of 4 atm on a continuous over-charging and a large preservation capacity of 95% at 400 cycle.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.228-236
• /
• 1996

An electrolysis system with a vertically circulating mercury capillary bundle electrode was developed with a very large electrode area in a minimum space. This system was operated by forcedly feeding mercury and aqueous solution containing metal ion into a fiber bundle packed densely within a small porous glass tube. In order to test the characteristics and stability of the electrolysis system, the reduction voltammograms of uranyl and ferric ions were measured with changes of the mercury flow rate and the aqueous flow rate. The aqueous flow rate had a large effect on the electrochemical reaction of metal ion occurring at the interface between the mercury and the aqueous solution and had to be regulated as an appropriate value to have a good limiting current shape. The limiting current was linearly proportional to the aqueous flow rate, and complete reductions of uranyl and ferric ions were rapidly and continuously accomplished at the potential showing limiting current. With a mercury flow rate high enough to keep a capillary continuum of mercury in the fiber bundle, the mercury flow rate had almost no effect on the electrochemical reaction. This system was confirmed to be effective and stable enough to control rapidly and continuously the oxidation state of metal ions fed into the system under an appropriate aqueous flow rate.

• Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.287-294
• /
• 2007

Effect of combined use of anti-microbial materials, such as ethanol, mustard and chitosan, on the quality of low salted kochujang was investigated during fermentation at $20^{\circ}C$ for 12 weeks. Viable cells of yeast increased remarkably during fermentation, but increasing ratio was significantly low in ethanol-mustard added kochujang. Activity of ${\beta}-amylase$ was high in anti-microbial material added kochujang, whereas ${\alpha}-amylase$ and protease activities were low in those groups. Water activity decreased during fermentation with being low in the control kochujang prepared with normal-salt without anti-microbial materials. Hunter L-, a- and b-values of kochujang increased during fermentation, and the degree of increase in total color difference $({\Delta}E)$ was low in ethanol added kochujang. Titratable acidity of kochujang was decreased in anti-microbial materials added group at late aging period, and oxidation-reduction potential was low in the control kochujang. Total sugar and reducing sugar contents of kochujang were high in ethanol-mustard added kochujang. Ethanol contents of kochujang increased at late aging period, with high values in ethanol-chitosan added kochujang. Amino nitrogen content increased during middle of fermentation, and ammonia nitrogen content of kochujang decreased in ethanol-mustard-chitosan added group during fermentation. After 12 weeks fermentation, sensory results showed that ethanol or ethanol-mustard added kochujang were the highest in color and flavor with the highest overall acceptability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1864-1871
• /
• 2013

The effect of additives on the quality of low salted doenjang was investigated during storage. Amylase activity gradually decreased during storage and protease activity decreased after four weeks. The number of yeast was lower in the mustard or ethanol added groups without a difference in bacterial count. The L- and b-values decreased gradually during storage with lower total color difference (${\Delta}E$) in garlic added doenjang. Gas production was reduced in the ethanol or mustard added groups. Titratable acidity and acid values were low in the ethanol and ethanol-garlic added ones. A reducing sugar content was higher in the groups with added additives. Ethanol decreased to the largest extent in mustard added doenjang. Amino-type nitrogen decreased in ethanol added doenjang, whereas ammonia-type nitrogen was low in the ethanol or mustard added groups. The taste, flavor, and overall acceptability of doenjang were significantly higher in the ethanol or garlic added groups than in the other groups.