• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.30-31
• /
• 2002

100 Gbit/in$^2$ 이상의 자기기록밀도를 달성하기 위해서는 재생헤드로 사용되고 있는 스핀밸브의 자기저항비가 10% 이상을 가지면서 열적 특성이 우수해야 한다. 현재까지 연구되어진 스핀밸브 구조 중 NiO([,2,3], $\alpha$-Fe$_2$O$_3$[4]등의 산화물 반강자성 층을 사용한 스핀밸브의 경우 기본 스핀밸브 구조를 사용하고도 이미 20% 이상의 자기저항비를 달성하였다. 이러한 높은 자기저항비는 절연층인 산화물 반강자성층과 금속 자성층 계면에서 일어나는 전자의 스펙큘라 반사(specular reflection)로부터 기인한다고 보고하고 있다.[2] (중략)

• Journal of the Korean Magnetics Society
• /
• v.12 no.4
• /
• pp.127-131
• /
• 2002

We fabricated MTJ devices that have doubly oxidized tunnel barrier using plasma oxidation method to from oxidized AlO$\sub$x/ tunnel barrier. Doubly oxidation I, which sputtered 10 ${\AA}$-bottom Al layer and oxidized it with oxidation time of 10 s. Subsequent sputtering of 13 ${\AA}$-Al was performed and the metallic layer was oxidized for 50, 80 and 120 s., respectively. Doubly oxidation II, which sputtered 10 ${\AA}$-bottom Al layer and oxidized it varying oxidation time for 30∼120 s. Subsequent sputtering of 13 ${\AA}$-Al was performed and the metallic layer was oxidized for 210 sec. Double oxidation process specimen showed MR ratio of above 27％ in all experiment range. Singly oxidation process. 13 ${\AA}$-Al layer and oxidized up to 210 s, showed less MR ratio and more narrow process window than those of doubly oxidation. Cross-sectional TEM images would that doubly oxidized barrowers were thinner and denser than singly oxidized ones. XPS characterization confirmed that doubly oxidation of Fe with bottom insulating layer. As a result, doubly oxidation could have superior MR ratio in process extent during long oxidation time because of preventing oxidation of bottom magnetic layer than singly oxidation.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.23-29
• /
• 1999

The Al oxide layer formed in 1M $H_2SO_4$ solution and the influence of applied frequency for electrodeposition of Mn on Al oxide layer were characterized using by impedance spectroscopy. Mn compounds were electrodeposited at the base of pores during deposition with applied low frequency voltage. For the Mn deposited oxide layer at 6OHz and 5Hz in 1 g/L $KMnO_4$ solution, in equivalent circuit for interpretation, the resistance ($R_2$) and capacitance ($C_2$) were considered to be due to deposition of Mn on base of pore. The electrochemical behavior of barrier layer and porous oxide layer on Al have been characterized by capacitance ($C_b$) and Young capacitance ($C_Y$) in equivalent circuit model.

• Korean Journal of Materials Research
• /
• v.2 no.1
• /
• pp.58-64
• /
• 1992

TCR modifying oxides which have negative TCR were added to the $\textrm{RuO}_2$ thick film resistors and how they affect the TCR and resistivity of the systems were investigated. Two types of resistor systems whose ratio of $\textrm{RuO}_2$ to glass were 20/80 and 12/88 were used as standard resistors. It was observed that the modifiers did not always lower the TCR of the resistors and the direction of the TCR change were different from system to system. It was confirmed, however, that the feasibility of optimization of TCR of the resistors. When more than two TCR modifiers were added simultaneously there was no interaction between them. The resultant TCR of the resistor wart just sum of the effects from individual modifier. It was found to be desirable that the amount of addition of the TCR modifiers should be less than 2 to 3 percent.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.499-504
• /
• 2015

The composite anodes of expanded graphite (EG) and multiwall carbon nanotube (MWCNT) for microbial fuel cells were fabricated by using coal tar pitch (CTP) binder containing nickel (Ni), and the effect of the anodes with the binders on the performance of the MFCs were examined in a batch reactor. During the start-up of the MFCs, quick increase in voltage was observed after a short lag phase time, indicating that the CTP binder is biocompatible. The biomass attatched on the anode surface was more at higher Ni content in the binder, as well as at smaller amount of CTP binder for the fabrication of the anode. The internal resistance of the MFC was smaller for the anode with more biomass. Based on the results, the ideal combination of CTP and Ni for the CTP binder for anode was 2 g and 0.2 g, respectively. The maximum power density was $731.8mW/m^2$, which was higher 23.7% than the anode with Nafion binder as control. The CTP binder containing Ni for the fabrication of anode is a good alternative in terms of performance and economics of MFCs.

• Proceedings of the Speleological Society Conference
• /
• 2005.11a
• /
• pp.69-77
• /
• 2005

비 직선적 정(+) 저항온도계수 특성을 갖은 PTC thermistor눈 전이온도(큐리점) 부근에서 온도변화에 대하여 극히 큰 저항 값의 변화를 나타내는 산화물계반도체 저항기(또는 발열체)로써, 일반적으로 반도체의 온도-저항 특성과 같이 상온영역에서 온도의 상승과 함께 부성저항 특성을 나타내어 감소하다가, 온도가 점점 증가하여 큐리점 부근에 도달하면 저항이 급격히 증가하는 독특한 특성을 갖는다. Perovskite 구조의 BaTiO$_3$를 주성분으로 미량의 Dopant를 첨가하여 도전성을 갖게 한 N형 반도체의 일종으로, 저항-온도 특성, 전류-전압 특성, 전류감쇄 특성 등을 이용하여 과전류 보호회로, 히터, TV 소자회로(degausser) 모터기동회로, 온도센서, 정온발열기기 등으로 널리 사용된다. 본 연구는 큐리점 부근의 급격한 저항변화 현상과 결정입계의 전위장벽 형성 및 그에 따른 정온발열 기능의 상관성으로부터 정온발열 탐사기능 온열부츠 제작 용 PTC 부픔소재의 응용성을 조사하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.240-241
• /
• 2005

비 직선적 정(+) 저항온도계수 특성을 갖는 PTC thermistor는 전이온도(큐리점) 부근에서 온도변화에 대하여 극히 큰 저항 값의 변화를 나타내는 산화물계반도체 저항기(또는 발열체)로써, 일반적으로 반도체의 온도-저항 특성과 같이 상온영역에서 온도의 상승과 함께 부성저항 특성을 나타내다가 온도가 점점 증가하여 큐리점 부근에 도달하면 저항이 급격히 증가하는 독특한 특성을 갖는다. Perovskite 구조의 $BaTiO_3$를 주성분으로 미량의 Dopant를 첨가하여 도전성을 갖게 한 N형 반도체의 일종으로 저항-온도 특성 전류-전압 특성, 전류감쇄 특성 등을 이용하여 과전류 보호회로, 히터, TV 소자회로(degausser), 모터기동회로, 온도센서, 정온발열기기 등으로 널리 사용된다. 본 연구는 큐리점 부근의 급격한 저항변화 현상과 결정입계의 전위장벽 형성 및 그에 따른 정온발열 기능의 상관성으로부터 그 응용성을 조사하였다.

• Journal of Life Science
• /
• v.25 no.3
• /
• pp.263-268
• /
• 2015

Coelomocytes are specialized cells that continually and nonspecifically scavenge fluid from the body cavity through endocytosis in Caenorhabditis elegans. Our previous study revealed that coelmocytes were specifically required for dietary-restriction-induced longevity in C. elegans. In the present study, we examined the effect of coelomocyte ablation on the response to environmental stressors and reproduction in C. elegans. Coelomocytes were ablated using diphtheria toxin specifically expressed in coelomocytes. After exposing worms to 20 J/cm²/min of ultraviolet irradiation in vivo, the survival of the worms was monitored daily. To examine their response to heat stress, their survival after 10 h of 35℃ heat shock was measured. Oxidative stress was induced using paraquat, and the susceptibility to oxidative stress was compared between wild-type control and coelomocyte-ablated worms. The total number of progeny produced was counted, and the time-course distribution of the progeny was determined. The worms with ablated coelomocytes showed reduced resistance to ultraviolet irradiation, but the ablation of coelomocytes had no effect on their response to heat or oxidative stress. The number of progeny produced during the gravid period was significantly decreased in the coelomocyte-ablated worms. These findings suggest that coelomocytes specifically modulate the response to ultraviolet irradiation and are required for normal reproduction in C. elegans. The findings could contribute to understanding of the mechanisms underlying dietary-restriction-induced longevity.

• Journal of the Korean Chemical Society
• /
• v.40 no.1
• /
• pp.37-43
• /
• 1996

The electrochemical impedance spectra of polyaniline film coated on tungsten electrodes by cyclic voltammetry have been measured in 0.1 M aqueous sulfuric acid solution. An electrochemical cell composed of large redox capacitance and low resistance of PANI-film in series was in agreement with the conductive behavior reported at these potentials. When the PANI was coated on bare tungsten, the electrolytic resistance was only observed. However, on the oxidized tungsten instead of bare tungsten, the resistance of tungsten oxide and the contact resistance between PANI and tungsten oxide were additionally observed. Equivalent electrical circuits have been deduced from the impedance data. It was therfore possible to obtain the parameters of the ionic mass transport within the film.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.653-658
• /
• 2008

The automotive environment is particularly demanding on connector performance, and is characterized by large temperature changes, high humidity and corrosive atmospheres. Fretting is a contact damage process that occurs between two contact surfaces. Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects arc suggested.