• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.2
• /
• pp.185-192
• /
• 2011

BNR process is an effective method to remove high strength nitrogen included in wastewater and piggery wastewater. There have been many former studies about the induction of nitritation which have many advantages than full nitrification and the impacting factors on nitritation. Especially, it is reported that organic matter has a relation with nitritation. In this study, laboratory sacle reactor was operated using effluent of anaerobic digester, piggery wastewater and anaerobic digester effluent of piggery wastewater. After analyzing the operating results, the impact of organic matter on nitritation was analyzed by classified COD fractions. It was showed that nitritation is affected by organic matter especially by Ss. In conclusion, organic matter should be managed not just as a single gross parameter but in a classified form.

• Korean Journal of Poultry Science
• /
• v.45 no.1
• /
• pp.29-39
• /
• 2018

The goal of the present work was to determine the optimal addition amounts of liquid smoke and curing mixture to develop Chuncheon Dakgalbi with improved preference and shelf-life. In the first experiment, Chuncheon Dakgalbi was prepared with different amounts of liquid smoke. In the second experiment Chuncheon Dakgalbi was prepared with various amounts of curing mixture and 0.1% (w/w) liquid smoke. Different amounts of liquid smoke resulted in different aroma patterns, which were observed using an electronic nose, and Dakgalbi with 0.1% (w/w) liquid smoke had the highest score in overall acceptability. The addition of liquid smoke and curing mixture inhibited the growth of bacteria, slowed down the decline in pH, and delayed increased in volatile basic nitrogen contents and lipid oxidation. However, no clear effects were observed on instrumental color. From a consumer preference test, the highest preference score was achieved by added 0.2% (w/w) curing mixture. Liquid smoke and curing mixture extended shelf-life and improved preference of Chuncheon Dakgalbi. Considering the physicochemical, microbiological and consumer preference, it was recommended to add 0.1% (w/w) liquid smoke and 0.2% (w/w) curing mixture to Chuncheon Dakgalbi to enhance shelf-life and preference.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.221-222
• /
• 2009

AZ31 마그네슘 합금에 AC 전류를 인가하여 MAO(micro-arc oxidation) process로 양극산화 할 때 알카리 전해액에 첨가되는 sodium silicate(Na2SiO3)의 농도에 따라 형성되는 양극 피막의 구조와 부식특성을 평가하였다. 전해질의 조성은 10g/1 KOH와 4g/1 KF 혼합 전해액에 sodium silicate를 (5, 10, 20, 40, 80)g/1로 달리하여 첨가한 후 $40mA/cm^2$의 전류밀도로 20분간 MAO 처리한 후 양극피막의 조직을 SEM, XRD, EPMA를 이용하여 분석하였고 동전위 분극시험으로 부식 거동을 평가하였으며 micro-vickers 경도계를 이용하여 단면의 경도를 측정하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.224-225
• /
• 2015

폐솔더 박리액으로부터 주석 및 구리의 분리를 위하여 옥살레이트 침전을 통해 각각 금속염으로 회수하기 위한 기초 연구를 실시하였다. 먼저 옥살산의 첨가량에 따라 주석의 침전율이 증가하였으며 당량비(옥살산/주석)의 1.0-1.5배를 첨가할 경우 주석이 99.5%, 구리는 2.0% 정도 침전되었고 철, 납 등은 거의 침전되지 않아 주석만 선택적으로 침전되는 것을 확인 하였다. 반응온도 증가에 따라 주석의 침전율은 증가하여 $60^{\circ}C$ 부근에서 최대값을 보이다가 온도가 더 증가하면 오히려 감소 경향을 보였다. 침전물의 고액분리 용이를 위해 카티온성 고분자 응집제를 이용하여 침강시킨 후, 분리된 침전물을 건조, 분쇄하여 $SnO_2$의 산화물을 얻을 수 있었다. 주석이 제거된 폐솔더 박리액에 옥살산을 첨가하여 구리가 약 91% 이상 침전되어 납, 철 등의 금속과 분리하여 선택적으로 회수가 가능하였다.

• Journal of Environmental Impact Assessment
• /
• v.24 no.4
• /
• pp.344-351
• /
• 2015

In this study, bio-electrokinetics was used to increase migration of arsenic by activating endemic microorganisms in the soil. In this technology, bio-electrokinetics which the cultured soil microorganisms and nutrients injected combines with biological technology. This technology using electrical movement of microorganisms could overcome the weakness of late degradation speed and low removal efficiency. And, various soil microorganisms reduce ferreous, manganese, etc., using organic matter by as an electron donor by injecting mixture of soil microorganisms and nutrients instead of using electrolyte of the electrode. Accordingly, surrounding metal oxide microorganisms convert arsenic (III) to arsenic (V) to increase migration of arsenic (III), in consequence, migration of arsenic increased in 60 to 70% compared to about 30% of conventional electrokinetics.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.139-139
• /
• 2018

최근 자동차 산업을 중심으로 한 수송용 기기의 경량화 추세에 따라 대표적인 경량금속 소재인 알루미늄 합금에 대한 수요가 증가하고 있으며 이에 따라 알루미늄 합금 표면에 다양한 특성을 부여할 수 있는 표면개질 기술에 대한 필요성이 부각되고 있다. 알루미늄 합금의 대표적인 표면처리기술인 아노다이징과 유사한 원리로 표면에 세라믹 코팅층을 형성할 수 있는 기술인 플라즈마 전해 산화(Plasma electrolytic oxidation, PEO)가 주목을 받고 있다. PEO 코팅법은 전해액 내에 소재를 침지시키고 400 ~ 600V에 이르는 고전압을 인가시켜 마이크로 방전을 유도하여 표면에 치밀한 세라믹 층을 형성시키는 기술이다. 본 연구에서는 PEO법으로 표면 개질된 Al 합금 표면의 표면 조직 특성과 전기화학 특성을 평가하고, 코팅층 특성에 미치는 공정 변수의 영향을 분석하고자 하였다. PEO 처리를 위해 사용된 소재는 상용 Al 합금 판재(Al 5083-O)로서 $2cm{\times}2cm$로 절단하여, 에머리페이퍼로 1000번까지 연마하여 사용하였다. 시험을 위한 PEO 처리 시스템은 전해액 수조, 일정 온도 유지를 위한 열교환기와 칠러, 전원 발생을 위한 전원공급기(power supply)로 구성되었다. 전해액은 약 알칼리 수용액을 이용하였으며, 전원 공급기를 통해 시험편에 펄스 전류를 인가하였다. PEO 처리 후 시편에 대하여 SEM, EDS, XRD 등을 이용한 표면 특성 평가를 실시하였다. 또한 코팅층의 전기화학적 부식 특성 평가를 위해 해수용액에서 동전위분극실험을 실시하였다. 시험 결과, Al 합금의 PEO 처리 시 내식성은 개선되는 것으로 확인되었으며, 공정변수는 표면의 미세조직 및 전기화학적 특성에 큰 영향을 미치는 것으로 나타났다.

• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.816-822
• /
• 2006

The antimicrobial and antioxidative effect of mechanical bamboo smoke distillate (MBSD) and traditional bamboo smoke distillate (TBSD) were investigated. Antimicrobial activity was demonstrated against all the microorganisms used in this experiment and was the higher in TBSD than in MBSD, with an activity concentration in the range 10-50 ${\mu}m/8$ mm paper disc. At the same concentration the antimicrobial activities of TBSD and MBSD was Gram positive bacteria>gram negative bacteria>Lactotobacillus>yeast. The minimum inhibition concentration (MIC) of BSC was 1.0-7.3${\mu}L/mL$, and the maximum lethal concentration (MLC) was 26.7-116.7 ${\mu}L/mL$. The soybean oil oxidative stability increased with increasing BSD concentration. The induction periods of oil oxidation were 3.75, 4.57 and 12.06 days for the samples with BSD added at 0.1%, 0.5%, and 1.0%, respectively. The RAE in soybean oil with 0.5% BSD was evaluated to be 168.45%, being similar to that of the sample with 0.02% BHT.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.601-608
• /
• 2014

In this study, we investigated the antioxidant activity of green kohlrabi juice (GKJ) and purple kohlrabi juice (PKJ) using various in vitro methods. The results of 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) radical scavenging activities, ferric ion reducing antioxidant power (FRAP), reducing power, and nitrite scavenging activities showed that GKJ possessed higher antioxidant activity than PKJ. Green kohlrabi powder (GKJP) and purple kohlrabi powder (PKJP) inhibited hydrogen peroxide-induced cell death in human dermal fibroblasts. In addition, GKJP and PKJP suppressed intracellular reactive oxygen species (ROS) production induced by hydrogen peroxide in human dermal fibroblasts. These results suggest that green and purple kohlrabi juices are potential natural sources of antioxidants.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.5
• /
• pp.782-792
• /
• 2004

The effects of sealing solution for anodized Mg-Al alloys and their corrosion resistance property were investigated. focusing on the effects of anodizing potentials aluminum contents and sealing solutions. All of the anodized specimens showed better corrosion resistance than that of non-anodized specimens, regardless of applied potentials. It was found that the anodic film formed at 4 V had the best corrosion resistance. The sealing effects were improved by increasing the temperature of distilled water. the pH of solution and the relative intensity ratio of $Mg(OH)_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.652-657
• /
• 1998

We have performed spin-spray ferrite plating of $Fe{_3}{-X}-Ni_XO_4$(X=0.17~0.26) films in the temperature region $T=80~95[^{\circ}C]$. A reaction solution and an oxidizing solution were supplied to a reaction chamber by supply pump. The solubility limit of Ni increases as the substrate temperature increase, from X=0.17 at $80[^{\circ}C]$ to X=0.26 at $95[^{\circ}C]$. All the films are polycrystalline with no preferential orientation, and the magnetization exhibits no definite anisotropy. Grain size in the films increases as X increases, reaching $0.87[\mu{m}]$ at X=0.26.