• Journal of the Korean Vacuum Society
• /
• 제17권5호
• /
• pp.394-399
• /
• 2008

Growth and electronic structure of pentacene film on silicon oxide before and after octadecyltrichlorosilane (OTS) treatment have been studied by photoelectron spectroscopy and photoelectron emission microscopy. On the OTS-treated surface, due to the weak interaction between the substrate and pentacene, the diffusion of pentacene is enhanced and domain size gradually grows, leading to a gradual change of the HOMO offset position. On the bare silicon oxide, the change of the HOMO position is marginal because of relatively strong interaction between the substrate and pentacene from the beginning.

• Journal of the Korean Magnetics Society
• /
• 제9권5호
• /
• pp.245-250
• /
• 1999

The effect of substrate and oxidization time on $substrate /Py/Al_2O_3/Co\;(Py=Ni_{81}Fe_{19})$ tunnel junction was studied. Samples were prepared without breaking vacuum by changing shadow masks in-situ. The resistance of tunnel junctions increased, but measured MR decreased with oxidization time. Negative MR observed for samples of tunnel resistivity lower than 0.17 M$\Omega$ $({\mu}m)^2$. MR resistivity decreased with the change of substrates in the order of thermally oxidized Si(111), Si(100), Coring Glass 2948, Corning Glass 7059. Sign change and the variation of MR was explained with non uniform current effect.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.43-46
• /
• 2006

본 연구는 페라이트의 Fe 양이온 일부를 Ni, Mn, Co등으로 치환하여 M-ferrites를 제조하여 열화학적 2단계 물 분해 반응의 특성을 비교 평가하였고, XRD, SEM, GC등의 분석으로 각 금속산화물의 특성을 확인하였다. M-ferrites는 고상법으로 제조하였다. 각각의 M-ferrites에 대한 열적환원은 1573K에서 진행하였고 물 분해 반응은 1273K에서 실시하였다. 이 반응에서 생성된 가스는 전량 포집하여 GC를 통해 분석하였다. 반응 전후의 시료에 대하여 SEM, XRD를 분석하여 GC결과와 함께 금속산화물의 산화환원반응 특성을 고찰하였다. 그 결과로서 물 분해 반응 후 M-ferrite (M=Co, Ni, Mn)의 생성을 XRD를 통하여 확인할 수 있었고, 물 분해 반응과의 비교결과 격자상수의 증대가 M-ferrite내의 산소의 환원에 영향을 미치는 것을 알 수 있었다. SEM결과에서는 4cycle의 물 분해 반응 후 Mn-ferrite의 심한 sintering 현상을 확인 할 수 있었다.

• Journal of the Korean Magnetics Society
• /
• 제7권2호
• /
• pp.82-89
• /
• 1997

Dependence of magnetoresistance on the thickness of Cu, type and thickness of buffer layer, and the stacking number of multilayer in the form buffer /$[Co(17{\AA}/Cu(t{\AA})]_{20}$ were investigated. To evaluate effect of annealing on this samples, X-ray diffraction analysis, vibrating sample magnetometer analysis, and magnetoresistance measurement (4-probe method) were performed. The magnetoresistance ratio exhibits a maximum of 21% for the multilayer with Cu thickness of 24$\AA$ and Fe buffer layer thickness of 50$\AA$. Deposition of film under low base pressure induces in increase magnetoresistance ratio by preventing oxidation. The multilayer annealed below 30$0^{\circ}C$ temperature allowed larger textured grain without loss in the periodicity. Magnetoresistance ratios of the multilayer with Cu thickness of 24$\AA$ and 36$\AA$ were increased due to the increase in the antiferromagnetically coupled fraction after annealing.

• Analytical Science and Technology
• /
• 제15권2호
• /
• pp.120-126
• /
• 2002

The analytical performance of four commercially-available pneumatic nebulizers(Meinhard, Cross-flow, Babington, ESI PFA) was evaluated using inductively coupled plasma-atomic emission spectrometry (ICP-AES) and ICP-mass spectrometry (ICP-MS) instruments. The performance of an inert concentric nebulizer and a modified conespray nebulizer, made in Korea Research Institute of Standards and Science (KRISS), is compared with that of the four commercial nebulizers. Variation of sample introduction efficiency was investigated as carrier argon pressure and sample uptake rate were changed. Variation of sensitivity, signal stability, blank intensity and oxide/hydride ratios were also studied when the nebulizers were connected to the ICP-MS and ICP-AES instruments. It was found that good analytical result such as high sensitivity, low blank, stable signal and so on can be obtained with judicious selection of the nebulizer depending on the type of sample, sample amount, type of analytical instrument and analyte.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제29권1B호
• /
• pp.91-96
• /
• 2009

Layered double hydroxide is synthesized and used in the arsenate adsorption experiments. The shapes of two materials analyzed by TEM showed that unheated material is amorphous in shape, micro-sized while heat treated material showed more crystallized in shape and nano-sized. X-ray diffraction showed this result more obvious. $N_2$ adsorption-desorption results showed that the materials are mesoporous and the specific surface area of the heated material is more than two times larger than the unheated material. Adsorption of As(V) is expected to be more in the heated material than the unheated material. Kinetic test of arsenate adsorption showed very fast reaction. The reactivity of Fe with As(V) might be the main factor for this result. The reaction kinetic of the heated and the unheated materials were similar and even the adsorption isotherms showed similar results for both materials. Both materials are found to be useful in remediation of soil and groundwater polluted by waste mine tailings consist of high concentration of As(V).

• Resources Recycling
• /
• 제22권6호
• /
• pp.55-63
• /
• 2013

In this study, a electrochemical-chemical combined dissolution technology was conducted by electro-generated chlorine to obtain ruthenium solution from ruthenium metal. To find out the optimum leaching conditions of ruthenium in chloride solution, this leaching process was carried out on the variation of pH, reaction time, temperature and applied voltage at the electro-generated chlorine system in the reaction bath. Also, ozone generator was used to obtain ruthenium(III) chloride solution to increase the leaching rate. The optimum condition was observed at pH 10.0, $40^{\circ}C$ within 1 hr of reaction time that more than 88% of ruthenium(III) chloride dissolved.

• Korean Journal of Food Science and Technology
• /
• 제47권4호
• /
• pp.517-524
• /
• 2015

The objectives of the present study were to investigate the protective effects of Angelica keiskei juice and Oenanthe javanica juice against oxidative damage in LLC-$PK_1$ renal epithelial cells and to evaluate their free radical-scavenging activities. Both A. keiskei juice and O. javanica juice showed a strong in vitro antioxidant activities such as ${\alpha}$, ${\alpha}$-diphenyl-${\beta}$-picrylhydrazyl (DPPH), nitric oxide (NO), $O_2{^-}$, and ${\cdot}OH$ radical-scavenging activities. The LLC-$PK_1$ cells showed significant lipid peroxidation and cell death due to oxidative stress when it was induced by 2, 2'-azobis (2-amidinopropane) dihydrochloride (AAPH), sodium nitroprusside (SNP), pyrogallol, and 3-morpholinosydnonimine (SIN-1). Treatment with both A. keiskei juice and O. javanica juice significantly increased cell viability and inhibited lipid peroxidation. These results suggest that A. keiskei juice and O. javanica juice are potential natural antioxidants.

• Proceedings of the Korean Fiber Society Conference
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.497-500
• /
• 1998

고분자 물질에 처리하는 전자기파 차폐처리 방법으로서 무전해 도금법은 차폐 처리하고자 하는 매트릭스 표면에 균일한 금속 필름을 형성할 수 있으며 차폐효과가 크고 시료의 형태가 복잡하여도 응용 가능한 가공방법으로 알려져 있다. [1,2] 무전해 구리 도금의 경우, 도금용액 중에 포함되는 환원제의 산화반응에 의해 유리되는 전자에 의하여 금속이온을 환원함으로써 금속 피막을 석출시키며 이때 일어나는 반응 메카니즘은 다음과 같다. [3] (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.99-100
• /
• 2000

대기 중 휘발성유기화합물(Volatile Organic Compounds)은 인간에게 직접적으로 위해한 영향을 준다는 보건학적인 측면과 광화학스모그현상의 원인이 되는 산화성물질의 생성에 관여한다는 이유 등으로 많은 주목을 받고있으며, VOCs의 대기 중 농도수준을 평가하기 위한 다양한 방법이 active sampling방법을 중심으로 제안되고 있다. 그러나 active sampling의 경우 장비가 고가이며, 채취유량의 정확한 측정이 필요하고, 전원공급문제 및 장비의 부피로 인하여 시료채취지점의 선정에 한계를 갖고있는 것이 사실이다. (중략)