• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.48-48
• /
• 1999

티타늄 알루미나이드 합금은 이들의 강도나 고온 특성 때문에 초음속 비행기의 구조물질이나 수소를 연료로 사용하는 비행기의 엔진물질로 각광받고 있다. 그러나 티타늄 알루미나이드 합금들은 이들이 갖는 규칙적인 미세구조로 인하여 실온에서 낮은 연성을 나타내는 단점이 있다. 실온에서 낮은 연성을 갖는 티타늄 알루미나이드 합금의 단점은 텅스텐, 물리브덴, 니오비움, 탄타륨, 바나디움 등의 베타 안정화 물질들을 첨가함으로서 어느정도 극복되고 있다. 따라서 티타늄 알루미나이드 합금이 초음속 비행기의 구조 물질이나 수소를 사용하는 엔진 물질로 사용되기 위해서는 이 물질들의 산화연구가 필수적이다. 지금까지 티타늄의 산화연구에서 알루미늄이나 니오비움의 역할에 대해서는 여러 연구자들이 연구를 한 바 있다. Chaze와 Coddet는 알루미늄이 티타늄에서 산소의 용해도를 감소시키고, Chen과 Rosa는 니오비움이 티타늄에서 산화물 형성율을 낮춘다는 것을 각각 알아냈다. 그러나 지금까지 티타늄 알루미나이드의 산화연구는 충분하지 못했다. 지금까지 티타늄 알루미나이드의 산화연구에서 밝혀진 산화운동학의 내용은 가열온도와 가열시간에 따라 크게 다른 두 개 혹은 그 이상의 산화물을 갖는다는 것이다. 본 연구의 목적은 여러 가지 티타늄 알루미나이드 합금의 산화특성을 밝히는 것이다. 이를 위하여 첫 번째 실험은 실온 공기 중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들($\alpha$2,$\beta$,${\gamma}$)을 초고진공($\leq$10-11Torr)속에 넣고, 시료의 온도를 실온에서 100$0^{\circ}C$까지 변화시키면서 AES(Auger Electron Spectroscopy)와 ISS(Ion Scattering Spectroscopy)를 사용하여 각각의 온도에서 여러 가지 시료들의 표면조성을 조사했다. 두 번째 실험은 티타늄 알루미나이드 시료를 고순도 공기(hydrocarbon$\leq$0.1^g , pp m) 중에서 각각 $600^{\circ}C$에서 100$0^{\circ}C$까지 가열하여 산화시켰다. 이 시료의 산화도는 각각의 가열온도에서 가열시간을 변하시키면서 TGA(Thermogravimetric Apparatus)로 측정했다. 실온 공기중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들을 초고진공속에 넣어 100$0^{\circ}C$까지 가열한 실험에서는 이들 시료에 포함된 알루미늄의 양에 따라서 표면 조성이 크게 다른 것을 알 수 있었다. 그리고 고순도 공기 중에서 100$0^{\circ}C$까지 가열하여 산화시킨 티타늄 알루미나이드 산화물의 산화기구는 명백한 3단계 포물선 산화의 특성을 나타냈다.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.816-822
• /
• 1996

Dependence of graphitic structure on oxidation of carbon materials was discussed using furan resin-derived carbon with inorganic compounds such as SiC and TiO2 Oxidation of carbon was governed by active site. I. e surface area regardless of the degree of graphitization. When oxidation was considered for not unit weight but unit area graphitization was important factor for oxidation so that the degree of graphitization increased the oxidation rate was delayed. Graphite (tiO2 addition) and turbostratic graphite(SiC addition) were oxidized through the same mechanism. In carbon materials with different structure components more than 2 oxidation of each component was different and amorphous component without the influence of additives on the surface was selectively oxidized in the intial oxidation stage.

• Polymer(Korea)
• /
• v.26 no.4
• /
• pp.452-461
• /
• 2002

In this study, the effect of various concentrations of antioxidants on thermo-oxidative degradation of polyamide 6 was investigated. Unstabilized and stabilized polyamides 6 were subjected to long-term oven aging in ambient atmosphere at 70~$160^{\circ}C$. All of specimens were discolored within 100 hr at temperature range of 70~$160^{\circ}C$. Optimum antioxidant concentration was determined from the data of mechanical properties, yellowness index and relative viscosity. The synergistic effect of each primary and secondary antioxidant concentrations was not observed. Yellowing phenomenon was explained by using NMR, IR and EA. Different carbonyl groups were detected by $^{13}C$/NMR. During thermooxidative degradation, oxygen consumptions were determined by EA. The lifetime after long-term aging was predicted using Arrhenius equation.

• Journal of Radiation Protection and Research
• /
• v.25 no.4
• /
• pp.183-190
• /
• 2000

Medicinal plants with synergistic effects on growth inhibition of canter cells under oxidative stress were screened in this study. Methanol extracts from 51 natural medicinal plants which were reported to have anticancer effort on hepatoma stomach cancer or colon cancers which are frequently found in Korean, were prepared and screened for their synergistic activity on growth inhibition of cancer cells under chemically-induced oxidative stress by using MTT assay. Twenty seven samples showed synergistic activity on the growth inhibition in various extent under chemically-induced oxidative stress. Among those samples, eleven samples such as Melia azedarach, Agastache rugosa, Catalpa ovata, Prunus persica, Sinomenium acutum Pulsatilla koreana, Oldenlandia diffusa, Anthriscus sylvestris, Schizandra chinensis, Gieditsia sinensis, Cridium officinale, showed decrease in $IC_{50}$ values more than 50%, other 16 samples showed decrease in $IC_{50}$ values between 50-25%, compared with the value acquired when medicinal plant sample was used alone. Among those 11 samples, extract of Catalpa ovata showed the highest activity. $IC_{50}$ values were decrease to 61% and 28% when carcinoma cells were treated with Catalpa ovata extract in combination of 75 and 100 uM of hydrogen peroxide, respectively.

• Clean Technology
• /
• v.19 no.4
• /
• pp.453-458
• /
• 2013

Fly ash has capacity to oxidize or adsorb mercury in a flue gas. Mercury oxidation and adsorption efficiencies of fly ash vary depending on the properties of fly ash. This study was designed to understand reaction characteristics of mercury with fly ash components. The fly ash components were tested to determine their oxidation and adsorption capabilities for elemental mercury and oxidized mercury. A sample was synthesized with fly ash components and tested. The test results were compared with those of the fly ash sample obtained from a coal-fired power plant. $Fe_2O_3$, CuO and carbon black showed higher oxidation or adsorption efficiency for elemental mercury while CaO, MgO, CuO and carbon black showed higher adsorption efficiency for mercury chloride. In addition, the synthesized sample showed comparable mercury oxidation and adsorption efficiencies to the fly ash sample.

• Journal of the Korean Vacuum Society
• /
• v.1 no.2
• /
• pp.259-268
• /
• 1992

냉연강판의 성능은 그 표면 상태에 의해서 많은 영향을 받는다. Temper-color(T/C)층은 tempering 과정 중 형성되는 다양한 색깔의 얇은 산화층으로서, 우 수한 표면 품질을 갖기 위해서는 방지 또는 제어되어져야 한다. T/C 현상을 이해하기 위하 여 여러 가지 표면 분석방법이 동원되었다. 유백색 T/C층의 표면은 1$mu extrm{m}$ 크기의 구형의 미 세구조로 구성되어 있었다. thens과정 중 C, Si, Mn과 Al이 표면으로 농화됨을 알았고, Mn 과 C은 정상시료에서 보다 T/C 시료에서 농화가 심하였다. T/C 시료에서의 산화층 두께는 정상시료의 60-$\AA$ 보다 매우 두꺼웠으나, 발생 정도에 따라 변화하였다. T/C층 내의 각 원소 산화 상태는, Si은 SiO2의 상태로, Mn은 MnO나 MnO2의 상태로 Fe는 극표면층의 Fe2O3 상태를 제외하고는 metallic 상태로 분석되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.731-737
• /
• 2006

Four well-characterized soils collected from A- and B-horizon in the Department of Energy Oak Ridge Reservation in USA, mainly distributed with Inceptisol(Inc) and Ultisol(Ult) soils, were used in this work. The bioaccessibility of arsenic as well as oxidation phenomena of As(III) was investigated with soils spiked with As(III) and As(V) using a physiologically based extraction test(PBET) at pH 1.5 and 1:100 soil to solution ratio. Also effect of aging time on the bioaccessibility of arsenic was investigated over the 6 months. After 48 hours(fresh) contacting As(V) solution with soils, all soils rapidly and strongly sequestrated As(V), especially Ult-B. However, little sequestration was observed after 3-months. When As(III) was spiked on the same soils, a great portion of As(III) was oxidized to As(V) after 48 hrs, especially Inc-A and Ult-A soils, which is strongly related with Mn content in soils. By using As(III)-spiked soils, much reduced bioaccessibility as total arsenic was observed from Inc-B and Ult-B soils over the 6 months aging time compared to that from Inc-A and Ult-A soils. This result can be explained by the continuous sequestration of As(V), produced from oxidation of As(III), onto Inc-B and Ult-B soils having much amount of iron. The trend of As(III) sequestration over six months aging time was quite similar with that of As(V) sequestration.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.21-21
• /
• 2010

현재 시대에는 자원의 부족으로 인하여 원재료의 낮은 등급을 정제하는 것이 중요하다. 자기분리 기술이 산업 계 원재료들의 정제에 적용되는 것이 기대된다. 예를 들면 고순도의 유리나 절연체를 제작하기 위한 원재료에서 철산화물의 제거는 매우 중요하다. 자기를 띠는 입자들과 자기분리 필터 와이어 사이에 발생하는 끌어당기는 힘은 다른 자기분리와 비교 할 때 초전도 자기분리에서 훨씬 강하다. 초전도 마그네트를 이용하여 높은 자기장을 형성하기 때문에 일반 자기분리의 자성 입자 포획력을 능가한다. 본 연구에서는 습식 조건에서 산업계 원재료로부터 철계 산화물을 제거하기 위해서 초전도 자기문리를 사용하여 실험하였다. 실험에 사용된 시료는 유리원료로 사용되는 2종류로 시료A는 0.1 ~ 0.3 mm의 평균입도를 갖는 모래형상이며 시료B는 평균입도 0.03 ~ 0.1 mm의 고운모래 형태이다. 자기분리를 위해 상온에서 100 mm의 직경을 갖는 600 mm의 높이의 전도냉각형 Nb-Ti 초전도 마그네트를 사용하였으며 시료를 위에서 공급하고 아래로 배출되도록 수직형으로 설치하였다. 시료 500 g과 증류수 2 L를 혼합하여 교반시키고 6 T의 자기장 하에서 실험하였다. 자기분리 필터는 초전도 마그네트에서의 자기장의 분포를 해석하여 디자인하였다. 자기분리 필터의 자기적 특성을 알아보기 위해 진동시료형 자력계를 사용하였다. 산업계 원재료는 X선 형광분석기를 사용하여 성분을 분석하였다. 산업계 원재료를 이용하여 초전도 자기분리를 실시한 결과 철계 산화물은 시료A에서 43.5 %제거되었으며 시료B에서는 77.3%제거되었다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1106-1112
• /
• 2003

For the purpose of making clear the role of oxygen in the thermoelectric properties of FeSi$_2$, thermoelectric measurements and spectroscopic characterization were conducted for the oxidized specimens fabricated from ($\alpha$+$\varepsilon$)-phases and/or $\beta$-phase. Addition of oxygen to FeSi$_2$ prevented both densification during sintering and transformation from metallic phases to semiconducting phase during annealing treatment. In an specimens, electrical conductivity and thermal conductivity decreased with oxidation time. The Seebeck coefficient was positive and small for pure FeSi$_2$. And/or the oxidized specimens fabricated from ($\alpha$+$\varepsilon$)-phases. However, it was negative and showed a maximum peak at about 500 K for the oxidized FeSi$_2$ fabricated from $\beta$-phase. The value of maximum peak increased with oxidation time.