• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.2011-2013
• /
• 2002

일반적으로, 전도성 고분자는 금속에 준하는 전기 전도도와 다공성을 이용한 전해질 이온 및 생채 고분자의 물리, 화학적 도우핑 능력을 장점으로 한다. 따라서, 이 분야의 최근 연구동향도 이온 도우핑에 의한 전도성 고분자의 전기 전도도 향상에 초점이 맞추어져 있으며, 이미 다수의 연구진에 의행 여러 가지 방법이 제시되었다. 본 논문은 전기 화학적 cementation 공정을 이용하여 금속 이온을 전도성 고분자에 도우핑하고 특성을 고찰하였다. 전도성 고분자로써 polypyrrole (PPy)을 사용하고, micropaticles (구리와 니켈 이온)를 도펀트 (dopant)로 하여 -1.5 V ${\sim}$ 2V의 범위에서 순환 전압 전류법 (Cyclic voltammetry)을 이용해 organic-inorganic complex를 제작하였고, 각각의 전극을 비교, 분석 하였다. 구리 이온을 도우핑한 PPy 필름은 전기 전도도가 매우 우수하나 대기 중 공기 및 수분에 의해 쉽게 산화되므로 life-time이 짧다. 이를 보완하기 위하여 상대적으로 안정한 니켈 이온을 도우핑한 PPy 필름의 전기 화학적 특성을 고찰하였다. 전극의 표면은 SEM (Scanning Electron Microscopy), EDX (Energy Dispersive X-ray spectroscopy)를 이용하여 분석하였다.

• Resources Recycling
• /
• v.30 no.6
• /
• pp.76-82
• /
• 2021

The separation of palladium from crude metal, which is obtained from electronic waste using pyrometallurgy was achieved through electrolysis. This was done to recover high-purity copper. The oxidation potentials of these metals are a fundamental part of the analysis of electrolytic separation of palladium and impurity metals. To achieve this, copper, iron, and nickel were dissolved in the electrolyte, and palladium and aluminum were found to be recoverable from anode slime. During the electrolysis for palladium separation, palladium was present in the anode slime and was obtained with a recovery of 97.46 % indicating almost no loss. 4N-grade copper was recovered from the electrodeposition layer at the cathode.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.444-451
• /
• 2007

Catalytic oxidation characteristics of benzene as a VOC was investigated using a fixed bed reactor system over transition $metals/\gamma-Al_2O_3$ catalysts. As transition metals, eight metals including copper, nickel, manganese, iron etc. were adopted. The parametric tests were conducted at the reaction temperature range of $200\sim500^{\circ}C$, benzene concentration of $1,000\sim3,000$ ppm, and space velocity range of $5,000\sim60,000\;hr^{-l}$. The property analyses such as BET, SEM, XRD and the conversions of catalytic oxidation of VOC were examined. The experimental results showed that the conversion was increased with decreasing VOC concentration and space velocity. It was also found that $Cu/\gamma-Al_2O_3$ catalyst calcinated at $500^{\circ}C$ showed the highest activity for the oxidation of benzene and 15% metal loading was the optimum impregnation level.

• Clean Technology
• /
• v.23 no.2
• /
• pp.158-162
• /
• 2017

$FeCl_3$ solution has been used as an etchant for metal etching such as Fe, Cu, Al and Ni. In the etching process, $Fe^{3+}$ is reduced to $Fe^{2+}$ and the etching efficiency is decreased. Waste $FeCl_3$ etchant has environmental, economic problems and thus the regeneration of the etching solution has been required. In this study, HCl was mixed with the $FeCl_2$ solution and then, $H_2O_2$, $NaClO_3$ were added into the mixed solution to oxidize the $Fe^{2+}$. During the oxidation process, oxidation-reduction potential (ORP) was measured and the relationship between ORP and oxidation ratio was investigated. The ORP is increased with increasing the concentration of $H_2O_2$ and $NaClO_3$, and then the ORP is decreased with oxidation progress. Such a behavior was in good agreement with Nernst's equation. Also, the oxidation efficiency was about 99% when a sufficient amount of HCl and $H_2O_2$, $NaClO_3$ were added.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.441-448
• /
• 2016

Heavy metal removal study is conducted from synthetic waste water by reduction and oxidation(redox) reaction of Cu-Zn metal alloy and adsorption reaction of aluminium silicate. Heavy metal whose ionization tendency is smaller than zinc are reducted in an aqueous solution, and the concentration of ionized zinc is reduced by adsorption reaction. The average diameter of metal alloy micro fiber is about $200{\mu}m$, and the surface area is wide enough to get equilibrium in a single cycle treatment. A single cycle treatment of redox reaction of Cu-Zn metal alloy, could remove 100.0 % of Cr(III), 98.0 % of Hg, 92.0 % of Sn and 91.4 % of Cu respectively. An ionization tendency of chromium is very close to zinc, but removal efficiency of chromium by redox reaction is significant. This result shows that trivalent chromium ion is expected to generate hydroxide precipitation with $OH^-$ ion generated by redox reaction. Zinc ion generated by redox reaction is readily removed by adsorption reaction of aluminium silicate in a single cycle treatment. Other heavy metal components which are not perfectly removed by redox reaction also showed very high removal efficiency of 98.0 % or more by adsorption reaction. Aluminium ion is not increased by adsorption reaction of aluminium silicate. That means heavy metal ion removal mechanism by adsorption reaction is turned out to be not an ion exchange reaction, but an adsorption reaction.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.5
• /
• pp.20-34
• /
• 2006

This study was undertaken to assess the anthropogenic impact on trace metal concentrations (Zn, Cu, Pb, Cr, Ni, and Cd) of roadside sediments (N = 70) from No.7 national road within the watershed of Hoidong Reservoir in Pusan City and to estimate the potential mobility of selected metals using sequential extraction. We generally found high concentrations of metals, especially Zn, Cu and Pb, affected by anthropogenic inputs. Compared to the trace metal concentrations of uncontaminated stream sediments, arithmetic mean concentrations of roadside sediments were about 7 times higher for Cu, 4 times higher for Zn, 3 times higher for Pb and Cr and, 2 times higher for Ni and As. Speciation data on the basis of sequential extraction indicate that most of the trace metals considered do not occur in significant quantities in the exchangeable fraction, except for Cd and Ni whose exchangeable fractions are appreciable (average 29.3 and 25.8%, respectively). Other metals such as Zn (51.4%) and Pb (45.2%) are preferentially bound to the reducible fraction, and therefore they can be potentially released by a pH decrease and/or redox change. Copper is mainly found in the organic fraction, while Cd is highest in the exchangeable fraction, and Cr and Ni in the residual fraction. Considering the proportion of metals bound to the exchangeable and carbonate fractions, the comparative mobility of metals probably decreases in the order of Cd>Ni>Pb>Zn>Cr>Cu. Although the total concentration data showed that Zn was typically present in potentially harmful concentration levels, the data on metal partitioning indicated that Cd, Ni and Pb pose the highest potential hazard for runoff water. As potential changes of redox state and pH may remobilize the metals bound to carbonates, amorphous oxides, and/or organic matter, and may release and flush them through drain networks into the watershed of Hoidong Reservoir, careful monitoring of environmental conditions appears to be very important.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.11a
• /
• pp.261-266
• /
• 1997

가장 넓게 쓰이고 있는 알칼리염소법에 의한 도금폐수 처리법은 약 50년전에 Dodge와 Zabban에 의해 발표된 이론에 기초하고, 이것은 pH 및 ORP에 의존하는 반응으로 차아염소산이 시안화물을 시안산염으로 산화시키는 것이며, 알칼리조건하에서 염소화를 하는 동안에 시안화물이 파괴되고 중금속염은 침전을 생성한다. 이 반응은 1단계에서 시안산기가 바로 시안산나트륨으로 되는 것이 아니고 반응의 중간생성물인 염화시아노겐(CNCI)이라고 하는 독성물질이 생성되기 때문에 안전상의 문제가 있다. 또 알카리 염소법은 고농도일 경우에는 처리가 대단히 어렵고, 저농도일지라도 철, 니켈 및 구리와 같이 중금속성분이 다량 혼입되면 배출허용기준치이하로 처리하기는 사실상 불가능하다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.648-648
• /
• 2013

물리적, 열적, 광학적, 그리고 전기적으로 우수한 특성을 가져 학계의 관심을 받는, 2차원 탄소 물질인 그래핀을 준비하는 방법에는 여러가지가 있다. 초창기 그래핀 연구방법에 사용됐던 흑연 플레이크와 스카치테이프를 이용한 기계적 박리법, 흑연의산화와 환원을이용한 화학적 합성법, 구리나 니켈과 같은 전이금속을 촉매로 이용한 화학기상증착을 이용한 합성법 등이 있고 각각은 그 방법에 따른 장단점이 있다. 본 포스터에서는 이 중 물리적 박리법과 화학기 상증착 성장법을 이용해 얻은 그래핀의 물리적, 전기적 특성을 비교분석하였다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.15-30
• /
• 2002

최근 화장품 사용인구의 증가와 안전성에 대한 관심 증대에 따라 화장품 중 유해성분 함유에 대한 논란이 종종 있어왔다. 화장품에 대한 전문적 지식이 없는 사람들에 의하여 진행된 잘못된 정보로 인하여 화장품 중에 포함된 모든 중금속이 인체에 심각한 영향을 초래한다는 등의 오해를 불러와 관련 업계에 적지 않은 피해를 주기도 하였다. 이에 본 자료에서는 구체적 근거자료와 연구 논문들을 기반으로 유해한 중금속, 안전하여 사용이 공인된 중금속 등을 조사하여 화장품에서의 중금속의 개념을 정립하고자 하였다. 국내에서는 식품의약품안전청 고시 제2000-27호에 화장품에 포함되었을 때 유해한 중금속으로 납, 비소 및 수은을 명시하고 그 규제농도를 규정하고 있다. 규제 중금속은 아니지만 피부에 알러지를 일으키는 중금속으로는 니켈이 있는데 화장품 중 몇몇 제품군에서 소량(수∼수십ppm) 이 검출되기도 한다. 그러나 이는 일상으로 사용하는 각종 귀금속, 시계, 안경테, 클립, 지퍼 등의 금속 용품에 포함된 니켈의 양(수∼수십%)에 비하여 매우 적은 양이며 정상적인 사람에게는 무해하다. 실제 대다수의 니켈 알러지는 화장품이 아닌 귀금속이나 시계 등의 금속류 제품 등에 의하여 유발된다. 또한 많은 종류의 중금속 화합물이 화장품 원료로 사용되고 있다. 전세계적으로 널리 사용되는 것으로 크롬, 망간, 비스머스, 구리, 철, 코발트, 티타늄, 아연 등의 화합물이 있으며 이들은 각종 화장품 공정서 및 원료집 등에 수재되어 사용되고 있다. 이들 중 코발트와 크롬이 피부에 유해하다는 몇몇 보고가 있지만, 이는 이들 원소의 수용성염형태의 특정 화합물인 cobalt chloride와 chromate 및 dichromate의 염에 관한 것으로 화장품에서 사용되는 불용성 산화물인 cobalt aluminum oxide, cobalt titanium oxide, cobalt blue, chromium oxde greens 및 chromium hydroide green 등, 국제적으로 널리 사용되는 안전한 중금속 화합물과는 그 특성 및 독성이 판이하게 다르다. 따라서 화장품에서는 매우 안전한 중금속 화합물만이 사용된다. 업계는 유해 중금속에 관해서는 규제에 입각한 엄격한 품질관리에 힘쓰고 중금속의 화학적 분자구조(수용성염 vs 불용성산화물)를 구별할 수 있는 분석방법 개발에 주력하여야 한다. 그리고 안전한 화장품을 사용하고자 하는 소비자의 욕구를 충족시키고 잘못된 인식과 보도로 인하여 안전한 화장품이 유해한 것으로 오도되는 것을 막아야 할 것이다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.3
• /
• pp.241-249
• /
• 2013

This study was aimed to provide the fundamental data about oxidized hair color products. For this reason, we collected 125 oxidized hair color products, which were distributed in domestic market from January to October, 2012, and measured the heavy metal concentrations of lead, arsenic, cadmium, chromium, manganese, nickel, copper in the samples. Results were compared by domestic, foreign, henna, type and color. The average metal concentrations were as follows; 0.211 ${\mu}g/g$ for lead, 0.008 ${\mu}g/g$ for cadmium, 0.051 ${\mu}g/g$ for arsenic, 0.954 ${\mu}g/g$ for chromium, 6.250 ${\mu}g/g$ for manganese, 0.591 ${\mu}g/g$ for nickel and 0.544 ${\mu}g/g$ for copper. In case of lead and arsenic, the concentrations were much less than the regulated amount (20 ${\mu}g/g$ and 10 ${\mu}g/g$, respectively) suggested by MFDS (Ministry of Food and Drug Safety). In henna (p < 0.05), the concentrations were significantly higher than those of other domestic and foreign oxidized hair color products as follows; 1.264 ${\mu}g/g$ for lead, 0.267 ${\mu}g/g$ for arsenic, 0.025 ${\mu}g/g$ for cadmium, 4.055 ${\mu}g/g$ for chromium, 72.044 ${\mu}g/g$ for manganese, 3.076 ${\mu}g/g$ for nickel and 4.640 ${\mu}g/g$ for copper. Statistically, it showed that the heavy metal concentrations were quite different for the different types of hair color products. The cream and liquid type products had the highest average concentration in chromium (0.708 ${\mu}g/g$, 0.478 ${\mu}g/g$, respectively). On the other hand, powder type products showed the highest concentration in manganese (60.041 ${\mu}g/g$). In addition, the concentrations of heavy metals and the color of products are not quite correlated. It was shown that average concentrations of lead and chromium were higher for yellow, chromium for red and pink, manganese for brown and black, and nickel for green.