• 한국수소및신에너지학회논문집
• /
• 제26권6호
• /
• pp.516-523
• /
• 2015

Nickel based oxygen transfer materials supported on two different YSZs were tested to evaluate their performance in methane chemical-looping reforming. The oxygen transfer materials of YSZs were selected with different amount of the doped yittrium in the $ZrO_2$ structure. The yittrium of 8 mol% stabilized the zirconia oxide to a cubic structure compare to the 3 mol% doping, which is known to be a good for oxygen transfer. Various nickel amounts (16wt.%, 32wt.%, 48wt.%) were loaded on the selected supports. The nickel amount of 32% shows the optimized catalyst structure with good physical properties and reducibility from the XRD, BET and H2-TPR analysis, especially when the support of 8YSZ was used. From the methane chemical-looping reforming, hydrogen was produced by methane decomposition catalyzed by Ni on both YSZs. Comparing two YSZ supports of 3YSZ and 8YSZ during the cycling tests, the catalyst with 8YSZ (Ni 32%) exhibits not only the higher methane conversion and hydrogen production but also a faster reaction rate reaching to the stable point.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.374-380
• /
• 2011

니켈촉매 막을 증착시킨 산화규산 기판위에 아세틸렌기체와 수소기체를 원료로 육불화황기체를 첨가기체로 탄소코일을 증착하였다. 육불화황이 투입되는 단계에 따라 성장된 탄소코일의 특성(형성 밀도, 형상)을 조사하였다. 육불화황을 연속적으로 주입하였을 경우 선형, 마이크로크기 코일, 나노크기 코일, 그리고 파동형 나노크기 코일 등 다양한 형태의 탄소코일들이 성장하였다. 하지만, 탄소코일 초기 증착단계에서 1분정도의 짧은시간 동안 육불화황을 주입한 경우 나노크기의 탄소코일 형상만을 대부분 얻을 수 있었다. 탄소코일 합성반응시간이 1분 정도 지체된 후의 단계에서 짧은시간 동안의 육불화황 주입은 코일형상 제어를 저해하였다. 따라서, 육불화황의 주입 시간과 주입단계가 탄소 코일의 형상을 결정하는 중요한 요인임을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.598-602
• /
• 2018

석유정제공장에서 사용된 폐촉매의 특성을 조사하여 바나듐 레독스 흐름전지용 소재인 전해액의 제조에 대하여 연구하였다. 석유정제공정에서 사용된 폐촉매의 총공극 부피, 비표면적 및 평균 기공크기는 BET법과 BJH법으로 계산하여 각각 3.96cc/g, 13.81m2/g, 1.15A 구하여 폐촉매에서 바나듐을 회수하여 전해액으로 제조 할 수 있음을 확인하였다. 폐촉매를 TG-DTA분석결과, $25^{\circ}C$부터 $700^{\circ}C$ 범위에서 중량손실이 약 23wt%였다. 폐촉매의 성분을 ICP 장비를 분석하여 황, 바나듐, 니켈, 알루미늄, 망간 철 구리 등의 원소를 확인하였다. 또한 TEM 장비로 측정한 결과 바나듐 외 다른 원소들이 결정성 클러스터가 밝은 점으로 명백하게 드러남을 알 수 있었다. 액액 추출법을 사용하여 폐촉매로 부터 바나듐을 99.25%로 분리하여 추출한 바나듐용액의 전기화학적 특성분석을 위해 CV(cyclic votammetry)측정한 결과, 산화/환원피크가 나타남으로서 전해질 용액으로서의 가능성을 보여주고 있다. 또한 폐촉매로 부터 추출된 바나듐 용액의 순도를 더욱 높여 전해질 용액을 제조하면 기존 상용화된 전해질 성능과 같은 것을 제조 할 것으로 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.136-141
• /
• 2005

Li-doped NiO was synthesized by molten salt method. $LiNO_3$-LiOH flux was used as a source for Li doping. $NiCl_2$ was added to the molten Li flux and then processed to make the Li-doped NiO material. Li:Ni ratios were maintained from 5:1 to 30:1 during the synthetic procedure and the Li doping amount of synthesized materials were found between 0.086-0.190 as a Li ion to Ni ion ratio. Li doping did not change the basic cubic structural characteristics of NiO as evidenced by XRD studies, however the lattice parameter decreased from 0.41769nm in pure NiO to 0.41271nm as Li doping amount increased. Hydrogen gas sensors were fabricated using these materials as thick films on alumina substrates. The half surface of each sensor was coated with the Pt catalyst. The sensor when exposed to the hydrogen gas blended in air, heated up the catalytic surface leaving rest half surface (without catalyst) cold. The thermoelectric voltage thus built up along the hot and cold surface of the Li-doped NiO made the basis for detecting hydrogen gas. The linearity of the voltage signal vs $H_2$ concentration was checked up to 4% of $H_2$ in air (as higher concentrations above 4.65% are explosive in air) using Li doped NiO of Li ion/Ni ion=0.111 as the sensor material. The response time T90 and the recovery time RT90 were less than 25 sec. There was minimum interference of other gases and hence $H_2$ gas can easily be detected.

• 한국전기전자재료학회논문지
• /
• 제17권12호
• /
• pp.1356-1361
• /
• 2004

High temperature superconducting coated conductor has a structure of ///. The buffer layer consists of multi-layer, this study reports the deposition method and optimal deposition conditions of YSZ(Yttria-stabilized zirconia) layer which plays a important part in preventing the elements of substrate from diffusing into the superconducting layer. YSZ layer was deposited by DC reactive sputtering technique using water vapor for oxidizing deposited elements on substrate. To investigate optimal thickness of YSZ film, four YSZ/CeO$_2$/Ni samples with different YSZ thickness(130 nm, 260 nm, 390 nm, and 650 nm) were prepared. The SEM image showed that the surface of YSZ layer was getting to be rougher as YSZ layer was getting thicker and the growth mode of YSZ layer was columnar grain growth. After CeO$_2$ layer was deposited with the same thickness of 18.3 nm on each four samples, YBCO layer was deposited by PLD method with the thickness of 300 nm. The critical currents of four samples were 0, 6 A, 7.5 A, and 5 A respectively. This shows that as YSZ layer is getting thicker, YSZ layer plays a good role as a diffusion barrier but the surface of YSZ layer is getting rougher.

• 한국패션뷰티학회지
• /
• 제2권2호
• /
• pp.93-100
• /
• 2004

This study is to measure the heavy metal content of permanent wave products which on marketing correctly as estimating the extent of exposure by a hair permanent wave scientifically. We would like to prevent an affair from arising health obstruction as to the heavy metal who is using those and also show the basic data for proposing the new standard. The results were as follows.: in case of the average heavy metal content for a wave type thioglycol acid ingredient includes 1.61ppm(Pb), 0.03ppm(Cd), 0.05ppm(Ni), 0.27ppm(Mn), 0.82ppm(Cu) and those were recognized the significant gap between products all the heavy metals. In case of a cysteine acid ingredient includes 0.86ppm(Pb), 0.01ppm(Cd), 0.05ppm(Ni), 0.20ppm(Mn) and 0.66ppm(Cu) and those were recognized the significant gap between products except a nickel. Straight type of permanent wave reductant includes 2.11ppm(Pb), 0.01ppm(Cd), 0.27ppm(Ni), 0.66ppm(Mn), 2.53ppm(Cu) and those were recognized the significant gap between products all the heavy metals. Permanent wave reducing agent includes 1.43ppm(Pb), 0.01ppm(Cd), 0.09ppm(Ni), 0.66ppm(Mn), 0.75ppm(Cu) and those were approved the significant gap between products except a cadmium. Exposure level of the heavy metal contents per onetime permanent waving were 242.3ppm(Pb), 2.5ppm(Cd), 17.7ppm(Ni), 89.0ppm(Mn), 174.7ppm(Cu).

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.58-63
• /
• 2005

We investigated the surface oxidation behavior of cube-textured polycrystalline nickel at various oxidation conditions. Cube-textured NiO film was formed on a cube-textured polycrystalline nickel regardless of oxidation conditions but different growth behavior of NiO crystals was observed depending on the oxidation conditions. The introduction of water vapor into $O_2$ did not affect the texture evolution, but rough and porous microstructure was developed. Microstructure of NiO film tends to be denser as the oxygen partial pressure increases. It is interesting that (111) peak of theta - two theta diffraction pattern started to get stronger in air atmosphere and (111) plane became the major texture in the substrate oxidized in high purity argon gas. Small amount of high index crystallographic plane NiO peak crystal was observed when $N_{2}O$ was used as an oxidant while only (200) plane crystal was formed in dry $O_2$ atmosphere. Flat and smooth surface was changed into rough faceted one when ramping rate to oxidation temperature was faster. The grain size of NiO was decreased when the oxygen partial pressure was low. It was also observed that the modification of nickel surface suppressed the development of (200) texture.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.386.2-386.2
• /
• 2014

본 연구에서는 바이오 센서 응용을 위해 그래핀을 전극으로 제작하여 그래핀 표면 결함준위에 따른 센서의 민감도를 전기화학 실험을 통해 관찰하였다. 그래핀은 니켈/구리촉매를 이용한 저 진공 화학 기상 증착 장비(Low-Pressure Chemical Vapor Deposition; LP-CVD)와 Photo-lithography로 제작한 것과 탄소 산화물을 환원시켜 만든 환원-그래핀, 두 가지를 사용하였다. 전기화학 실험에서 그래핀 전극 및 Silver/Silver chloride (Ag/AgCl), Fluorine doped Tin Oxide (FTO)은 작업 전극 및 기준 전극, 상대 전극으로 각각 사용하였고, 반응용액은 potassium hexacyanoferrate (III)를 농도를 다르게 하여 사용하였다. 그래핀의 표면 상태, 층수, 결함 정도 등 구조적인 특성은 원자력현미경(Atomic Force Microscopy; AFM), 주사 전자 현미경(Secondary Electron Microscopy; SEM)과 Raman spectroscopy를 각각 이용하여 확인하였고, 그래핀의 결함준위에 따른 반응면적 및 센서 감도 의존성을 전류모드-원자력현미경(Current-Atomic Force Microscopy; I-AFM)과 전기화학 임피던스 분광법(Electrochemical Impedance Spectroscopy; EIS)를 통해 그래핀 전극의 성능을 분석하고, 그래핀 결함 준위에 따른 센서 감도 의존성은 순환전위 분광법 (Cyclic Voltammetry; CV)를 이용하여 관찰하였다. 또한 농도가 다른 반응용액은 센서의 민감도를 관찰하는데 사용하였다. 결과적으로 LP-CVD로 성장한 그래핀과 환원-그래핀의 결함준위에 따른 센서의 성능을 비교 분석한 결과와 반응용액 농도에 따른 센서의 민감도 결과는 그래핀 바이오센서에 대한 응용 및 상용화를 앞당기는데 기여할 것으로 예상한다.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.169-173
• /
• 2005

Ni oxide thin films were formed through annealing treatment in the atmosphere after Ni thin films deposited by a r.f. magnetron sputtering method and then electric and material properties were analyzed for application to thermal sensors. Resistivity of Ni thin films decreased after annealing treatment at 30$0^{\circ}C$ and 40$0^{\circ}C$ for five hours due to crystallization of Ni thin films but the value increased over 45$0^{\circ}C$ because of Ni thin film's oxidation. Resistivity values of Ni thin films were in the range of 10.5 $\mu$Ωcm/$^{\circ}C$ to 2.84${\times}$10$^4$$\mu$Ωcm/$^{\circ}C$ according to the degree of Ni oxidation. Also temperature coefficient of resistance(TCR) values of Ni oxide thin films depended on the degree of Ni oxidation such as 2,188 ppm/$^{\circ}C$ to 5,630 ppm/$^{\circ}C$ in the temperature range of 0 $^{\circ}C$∼150 $^{\circ}C$. The results demonstrate that Ni oxide thin films of annealing treatment at 40$0^{\circ}C$ for 5hours could be more advantageous than pure Ni thin films and Pt thin films from a point of output properties and TCR, applied to thermal sensors.

• 방사성폐기물학회지
• /
• 제1권1호
• /
• pp.73-79
• /
• 2003

가압경수형 원자력발전소 일차계통에서 발생되는 방사성 부식생성물(크러드)은 원자력발전소 작업종사자 피폭의 주요원인이다. 또한, 최근 원자력발전소의 장주기운전 추세에 따라 장기간 노심에 침적된 방사성 부식생성물은 hideout 현상으로 노심의 출력에 영향을 주는 축방향이상출력 (AOA) 현상의 원인이 되고 있다. 크러드의 주요 성분은 마그네타이트, 니켈 페라이트, 코발트 페라이트가 주를 이루며, 이러한 산화물 형태는 강자성의 자기적 성질을 가지고 있다. 따라서, 전자석과 영구자석의 적절한 배치를 통하여 자기장을 발생시켜 크러드를 제거하는 필터 개발을 위해 개념 설계를 하였다. 기존의 필터와 달리 유체의 흐름을 방해하지 않아 압력저하 현상이 발생하지 않고, 연속적으로 사용할 수 있는 장점이 있다. 크러드 제거 기술의 하나로써 활용될 수 있을 것으로 기대된다.