In this study, the activity test and characterization were performed to evaluate the hydrogen sulfide removal characteristics using a V/TiO2 catalyst at room temperature. The optimal vanadium loading was 10 wt%, and the durability was greater than 60 minutes at 60~80% relative humidity. The Brunauer-Emmett-Teller (BET) surface area and raman spectroscopy results confirmed that the structure of the vanadium site exposed to the surface was a dominant factor in catalyst activity. From Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and X-ray crystallography (XRD) analyses, it was found that sulfur can be accumulated on the catalyst surface, which results in a decrease in durability under catalytic activity tests. Therefore, it is judged that a combined process of catalytic oxidation and regeneration is needed.
Journal of Advanced Marine Engineering and Technology
/
v.36
no.2
/
pp.276-285
/
2012
The objective of this research is to develop the coating technique by a porous self-fluxing alloy for improving the mechanical properties of run-out table roller surface with the hot rolling. To enhance the durability of run-out table roller with the hot rolling, the high hardness of roller surface should be maintained at high temperatures, and the improvement of wear resistance, corrosion resistance, heat resistance, burn resistance and adhesion resistance should be maintained. In order to be able to transport reliably a hot rolled steel sheet, also, the appropriate friction coefficient on the roller surface should be maintained and the slip between roller and steel should not occur. In this study, the wear resistance of roller increases after the self-fluxing alloy is changed to a cermet by adding the tungsten carbide(WC), and the coefficient of friction increases and the ability of grip is improved because the porosities are made by coating with fine iron powder on the roller surface. As a result, it is found that the ability of grip between the steel and the roller coated by a porous self-fluxing alloy contained to 5 ~ 10 wt% of Fe in the coating layer is improved compared to the roller coated by Ni-Cr. This is because the porosities are made after Fe contained in the roller is partially alloyed by heating with a furnace in the fusing process and the rest is eliminated by oxidation and dissolution.
The volume change in concrete takes place with changes in temperature and water content immediately after concrete casting. In the early age stage, the thermal and drying shrinkages can cause cracks that are very crucial to the durability of concrete. It was reported that when the cement with lightly-burnt MgO powder was used, the shrinkage of concrete can be reduced. This study investigates fundamental properties of cement composites with lightly burnt MgO powder by performing various experiments. The stability test results verified that MgO powder in cement composites does not cause any abnormal expansion. Also, the hydrate product analysis results obtained from MgO cement paste showed that MgO powder reduces the shrinkage at the longterm ages. In addition, the cement composites containing the proper amount of MgO powder could improve compressive strength. Finally, the shrinkage reduction from using MgO powder can be optimized by increasing MgO replacement level and curing temperature.
Proceedings of the Korean Institute of Information and Commucation Sciences Conference
/
2013.05a
/
pp.789-790
/
2013
$Er_2O_3/SiO_2$ double-layer gate dielectric shows low gate leakage current and high capacitance. In this paper, we apply $Er_2O_3/SiO_2$ double-layer gate dielectric as a charge trap layer for the first time. $Er_2O_3/SiO_2$ double-layer thickness is optimized by EDISON Nanophysics simulation tools. Using the simulation results, we fabricated Schottky-barrier silicide source/drain transistor, which has10 um/10um gate length and width, respectively. The nonvolatile device demonstrated very promising characterstics with P/E voltage of 11 V/-11 V, P/E speed of 50 ms/500 ms, data retention of ten years, and endurance of $10^4$ P/E cycles.
Journal of the Korean Crystal Growth and Crystal Technology
/
v.12
no.6
/
pp.304-310
/
2002
Novel charge trap type memory devices with reoxidized oxynitride gate dielectrics made by NO annealing and reoxidation process of initial oxide on substrate have been fabricated using 0.35 $\mu \textrm{m}$ retrograde twin well CMOS process. The feasibility for application as NVSM memory device and characteristics of traps have been investigated. For the fabrication of gate dielectric, initial oxide layer was grown by wet oxidation at $800^{\circ}C$ and it was reoxidized by wet oxidation at $800^{\circ}C$ after NO annealing to form the nitride layer for charge trap region for 30 minutes at $850^{\circ}C$. The programming conditions are possible in 11 V, 500 $\mu \textrm{s}$ for program and -13 V, 1ms for erase operation. The maximum memory window is 2.28 V. The retention is over 20 years in program state and about 28 hours in erase state, and the endurance is over $3 \times 10^3$P/E cycles. The lateral distributions of interface trap density and memory trap density have been determined by the single junction charge pumping technique. The maximum interface trap density and memory trap density are $4.5 \times 10^{10} \textrm{cm}^2$ and $3.7\times 10^{18}/\textrm{cm}^3$ respectively. After $10^3$ P/E cycles, interlace trap density increases to $2.3\times 10^{12} \textrm{cm}^2$ but memory charges decreases.
Ham, Hyo-Sik;Kim, Nam-Gyu;Kim, Beom-Jun;Kim, Mun-Gi;Bae, Dong-Ho;Cho, Sang-Myung
Proceedings of the KWS Conference
/
2010.05a
/
pp.66-66
/
2010
국내 화력발전의 $CO_2$배출량을 크게 줄이고, 친환경, 그린 화력발전시스템을 위한 가장 효과적인 수단은 발전효율을 획기적으로 증대시키는 것이기 때문에 이를 목표로 한 기술개발은 경제적으로나 산업적으로 파급효과가 매우 크다. 발전효율 증대를 위한 핵심기술은 증기터빈의 성능향상이다. 현재 일본, 미국, EU 등 각국이 가장 관심을 가지고 기술개발에 심혈을 쏟고 있는 초내열, 내식 합금소재는 $700^{\circ}C$이상에서 기계적 성능을 보장할 수 있는 Ni기 합금개발이고, 현재까지 상당한 기술수준에 이르고 있는 것으로 파악되고 있다. 국내의 경우는 관련기술개발을 위해 연구가 진행되고 있으나, 기술적으로 아직 미흡한 수준이다. Ni기 초내열, 내식합금을 개발해서 그것을 화력발전용 증기터빈 부품, 특히 초내열합금 용접형 터빈로터 소재로 이용하기 위해서는 체계적이고 실용적인 연구를 통하여 용접형로타의 내구성과 신뢰성이 보장되는 최적 수준의 접합기술 개발이 선행되어야 한다. 따라서 본 연구는 선행연구로 $700^{\circ}C$이상 초내열/내식 Ni기 합금소재의 용접기술 개발을 위한 후보 소재 Alloy 617의 동종재료 용접 기술 개발을 목표로 한다. 본 연구는 Alloy617 12.6t 맞대기 이음으로 U그루브 내로갭 TIG용접을 하였다. 1pass 1layer 방식으로 총 8pass 8layer로 용접하였다. 전류 및 용접속도는 동일하게 두고 실드가스를 Ar 또는 Ar-$H_2$ 가스로 변경하여 시험하였다. Ar가스 TIG용접은 비드표면에 산화스케일이 생기고, 비드면이 거칠며 전체적으로 산화되었다. 반면에 Ar-$H_2$가스 TIG용접은 비드표면에 산화스케일이 없으며 표면이 미려하고 산화되지 않았다. 실드가스에 수소가스 첨가시 환원성가스로 역할을 하게 되고 이에 따라 용융지 표면에 산화피막을 제거하여 용접비드를 청정하게 하는 효과를 가진다.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.9
/
pp.474-481
/
2018
The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.
Proceedings of the Korean Vacuum Society Conference
/
2010.08a
/
pp.69-69
/
2010
현대 건축물에서 건물에너지의 손실은 대부분은 창호를 통하여 유출되어지고 있으며 에너지 절감을 위해서는 창호의 단열성을 향상시켜야한다. 저방사(Low Emissivity) 코팅유리는 건축물의 냉난방비용을 절약할 수 있는 대표적인 건축재료로써 외부에서 유입되는 태양광의 가시광선 영역은 높은 투과율을 가지면서 적외선 영역과 겨울철 실내 난방열을 반사하는 특징을 지니는 박막코팅기술이다. 이 코팅유리는 일반적으로 유전체/금속/유전체 다층박막 구조로 되어있으며, 유전체층은 내구성 증진과 금속층의 반사를 낮추어 투과율이 향상된다. 금속층은 적외선영역의 복사에너지를 반사하는 역할을 하며 전도성이 우수한 Ag 또는 Au, Pt 등을 이용하고 있다. Ag의 경우 산화물기판 위에 증착하였을 경우 island 성장을 하고 이들의 합체는 전기적, 광학적 특성에 큰 영향을 미치게 된다. 본 연구에서는 DC-sputtering법으로 제조된 Ag/glass, Ag/Ta/glass 박막을 제조하고 Ta seeding이 Ag의 전기적, 광학적 성질에 미치는 영향을 관찰하였다. 박막의 표면 미세구조는 FE-SEM(Field Emission Scanning Electron Microscope)과 AFM(Atomic Force Microscope)으로, 표면저항은 4 point probe로 분석하였다. 광투과율은 UV-Vis spectroscopy와 FT-IR로 측정하였으며 측정파장범위는 각각 200~1100nm와 1400~2400nm 이다.
Proceedings of the Korean Vacuum Society Conference
/
2000.02a
/
pp.66-66
/
2000
Electrochromism이란 기전력 방향에 의한 가역적으로 색이 변하는 현상을 말하며, 열린 회로 기억성을 가지며 소비전력이 적고, 우수한 착색 효율을 갖는 등 여러 가지 유용성 때문에 디스플레이 및 전기적 착색 유리창에의 기술적 적용 가능성을 보이고 있다. 본 연구에서는 가장 우수한 일렉트로크로믹 특성을 내는 것으로 알려진 WO3 박막과 대향 전극으로 V2O5 박막을 사용하였다. 이들 박막은 알칼리 이온 주입물질이며, coloration.bleaching상태에서 광학 밀도가 크고, 내구성이 좋으며, 작은 비용으로 재료를 사용할 수 있다. 그리고 더 우수한 장점으로 부각되는 대면적의 코팅의 매력적인 기술인 졸겔법으로 제조 가능한 특성을 가지고 있다. 졸겔법 및 진공증착법으로 박막을 제조하고, 박막산화 및 수명저하 등의 위험이 적은 리튬이온을 이용하여 소자를 제작한 후 일렉트로크로믹 특성을 조사하고, 우수한 소자의 제조조건을 얻고자 하였다. 측정결과 졸겔법으로 제조된 WO3 박막과 V2O5 박막을 수증기 분위기에서 50$0^{\circ}C$로 1시간 열처리한 경우 가장 우수한 투과 변화율을 나타내었다. 정상전압인 2 volt보다 높은 3 volt로 cyclic voltamogram을 측정하는 과정에서 정.역방향 동작을 거듭할수록 peak이 크게 감소하는 현상을 발견하였으며, 양이온의 흐름에 의해 물질의 이동이 발생할 것이라는 판단아래 Auger depth profile을 측정한 결과 WO3막의 텅스텐과 ITO막의 인듐이 상호 확산하는 것을 관찰할 수 있었다. 이를 방지하기 위해 수백 의 텅스텐 박막을 WO3 막 위에 증착한 후 cyclic voltamogram과 Auger depth profile을 측정한 결과, cyclic voltamogram의 peak의 감소량이 1/10이하로 감호하였으며, 리튬이온의 흐름에 의한 인듐과 텅스텐의 이동을 효과적으로 방지할 수 있었다. 따라서 텅스텐 확산방지막의 삽입이 소자의 수명을 향상시킬 수 있는 효과적인 방법이라고 사료된다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.484-485
/
2011
반사방지(Anti-Reflection, AR) 특성은 태양전지, LED, 광검출기 등의 광전소자와 디스플레이의 효율과 투과도를 향상시키기 위해 적용되고 있다. 또한 최근에 네비게이션, 스마트폰의 보급 증가로 인해 소형 디스플레이에 지문방지와 동시에 반사방지 기능을 갖는 필름이 사용되고 있다. 현재 적용되고 있는 반사방지 필름은 다층박막 코팅으로 형성된 필름[1]으로 생산단가와 박막의 내구성 및 신뢰성에 문제점을 가지고 있다. 이런 문제점을 해결하기 위해 나노구조로 제작 되는 반사방지 필름에 관한 연구가 활발히 진행되고 있다[2]. 나노구조로 형성된 반사방지 구조는 moth-eye 구조라고 하며, 기본 원리는 원뿔 형태를 형성된 나노 구조를 통해 공기와 나노구조 사이의 유효 굴절률을 서서히 변화시켜 반사를 줄이는 것이다. 그러므로 moth-eye 나노구조는 파장 이하의 pitch와 파장 크기의 높이를 갖도록 구조가 제작되어야 한다[3]. Photo-lithography[4], e-beam lithography[5], interference lithography[6], dip-pen nanolithography[7], hybrid nano-patterning lithography[8] 등 여러 가지 방법으로 나노 구조를 제작하고 있으나, 네비게이션이나 스마트폰 등에 적용될 수 있는 대면적으로 제작하기 위해서는 roll-to-roll printing과 같은 대면적 공정을 이용하여 제작하는 것이 필요하다. 본 논문에서는 원통형 알루미늄 rod에 양극산화를 통해 다공성 AAO(anode aluminium oxide) template를 제작하고, roll-to-roll printing 기술을 사용하여 moth-eye 나노구조를 갖는 반사방지 필름을 제작하는 것에 대해 기술하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.