• Journal of Digital Convergence
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2024

The purpose of this study is to verify whether companies residing in industry-academic convergence zones designated by the government are achieving policy goals and to seek policy implications and directions for improvement through analysis. For the study, business activities targeting resident companies were divided into infrastructure, business content, management, and system aspects, and business performance indicators, resident company satisfaction surveys, and differences in sales increase between resident companies and non-resident companies were analyzed through t-test. Based on statistical analysis results, performance indicators, and corporate survey analysis results, we track joint industry-academia R&D projects to maximize the effectiveness for companies, develop and operate human resources management for teams, and provide financial support for ordinances of metropolitan local governments. Improvements such as stipulation, antenna facilities at the corporate research center, and improvement of the researcher's residential environment were suggested. This study is the first to quantitatively verify policy performance targeting companies residing in industry-academic convergence zones, a large-scale government project, and future follow-up research is needed, including analysis of policy effects based on various variables such as employment indicators and corporate financial indicators.

• Korean Architects
• /
• s.517
• /
• pp.48-51
• /
• 2012

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.537-550
• /
• 2018

The development focus of a smart city has been changed gradually from a physical development aspect to a space development aspect. In a space development aspect, the major application technologies are Environment Technology (ET), Information Technology (IT) and Environment Information Technology. On the other hand, it is unclear if the space convergence in a smart city has been changed by the 3 technologies. Therefore, specific analysis was performed on the convergence change of smart city 4 spaces (District, Street, Building, Facility) using the 3 technologies. The convergence distribution ratio according to the periods (period 1 : 1972~1999, period 2 : 2000~2009, period 3 : 2010~2017) among the spaces, ET (Environment Technology), IT (Information Technology), ET+IT (Environment Information Technology) in a smart city were examined. The smart city was high in the order of 'District (53/43%) - Building (36/29.1%) - Street (22/17.9%) - Facility (12/10.0%)' in the number of applications and ratio of convergence (Technology Convergence) at Period 1 (1972~1999). The smart city was high in the order of 'District (223/32.4%) - Building (197/28.6%) - Street (195/28.3%) - Facility (74/14.8%)' in the number of applications and ratio of convergence (Technology Convergence) at Period 2 (2000~2009). At period 3, the District (467/33%) was also the highest. On the other hand, the street (384/27.4%) was higher than the building (361/25.8%) and facility (188/13.4%) in smart city space. Fourth, the smart city was high in the order of 'District - Building - Street - Facility' in the number of applications and ratio of convergence (Technology Convergence) at Periods 1 (1972~1999) and 2 (2000~2009). In contrast, the average of number was high in the order of 'Building - Street - District - Facility'. At period 3(2010~2017), the number of applications and the ratio of convergence was high 'District - Street - Building - Facility'; the average of number was the same as in period 1 and 2. As a result, smart city space has been changed by the development of macroscopic urban spaces in the initial stage. Since then, district space-centric development and building space are confused with devices/technologies and changed for citizen inflow. The building space has evolved continually and smart city space will be expected to revitalize the street space connecting completed buildings.

• 기계와재료
• /
• v.25 no.3
• /
• pp.16-29
• /
• 2013

현재 전세계적으로 에너지 절감과 지구환경 보호를 위한 이산화탄소 가스 배출의 저감하는 피할 수 없는 생산제조산업 분야의 높은 장벽으로 다가서고 있다. 공작 기계류의 진보는 날이 갈수록 거듭되어 다양한 기술의 융복화 등 궁극적인 첨단 고도화에 이르고 있으나, 이와 같은 문제점들을 기본적으로 안고 있는 것은 사실이다. 그 대응 방안으로는 소성 성형 방식으로의 가능한 한 대체화가 될 수 있으며, 또한 기존에는 스프링 백 등의 고연성 등으로 인하여 성형이 곤란하여 기피하던 난성형재도 보다 경량화 등의 추세에 대응하기 위하여 불가피하게 사용되기 위해서도 획기적인 소성 성형 시스템을 필요로 한다. 이와 같은 차원에서 최근에 에코 융합화를 모색하는 새로운 서보모터 구동형 프레스 시스템의 도입이 적극적으로 이뤄지고 있으나 국내의 경우에는 국산화 개발이 늦어져 고부가가치 제품에 대한 기술종속성이 우려되고 있다. 최근 한국기계연구원을 중심으로 산학연 컨소시엄 형태로 산업원천기술개발사업의 일환인 지식기반 자율제어형 초정밀 디지털 서보프레스 시스템 개발에 관한 연구가 진행중이며, 기술선도국의 보유 기술 수위를 넘은 에코/정보/지식 융합화 모델을 궁국적으로 개발하고자 한다. 본문에서는 이에 대한 현재까지의 개발 진행 내용을 정리하여 간단히 요약하여 나타내었다.

• Journal of Industrial Convergence
• /
• v.13 no.1
• /
• pp.1-9
• /
• 2015

The purpose of this Study is to analyze the economic effect of the project for the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area aimed at activation of R&D of companies within the Kumoh Technology Valley. As the result of the analysis, the investment of 56.837 Billion Won in the establishment of the Convergence Zone of the Gyeongbuk Industry-University Convergence Area had the effect on production inducement valued at 133.582 Billion Won, effect on added value inducement valued at 41.764 Billion Won, effect on import inducement valued at 16.794 Billion Won and the effect on employment inducement numbered at 4,992 persons.try.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.9
• /
• pp.64-71
• /
• 2019

We herein propose a systematic design method of hydraulic pipes used in heavy construction equipment. We found that even though many design studies have been conducted regarding major hydraulic components such as pumps, cylinders, and control valves, studies regarding the optimal design of hydraulic pipes are scarce. In this study, the design of four types of pipes is considered: two high-pressure and two low-pressure pipes. First, fluid flow analysis was conducted based on oil flow and pressure for various radii of curvature. For a check-valve pipe, we considered the location of an inlet pipe. We could visualize fluid flow inside the pipe according to the flow velocity and pressure distribution. Based on fluid flow analysis, we conducted a structural analysis that revealed the stress distribution and concentration for each pipe design. We selected the best design parameters for each pipe design, fabricated the pipes, and subsequently tested them for validity.

• Korea Science and Art Forum
• /
• v.36
• /
• pp.11-22
• /
• 2018

This study recent changes in urban thermal environment caused by climate change generate diverse problems such as urban heat island effects, heat wave, and drought. Under this condition, with the increased perception and expectation of the quality of life, the urban citizens' desire for outdoor activities is increasing. This study conducted the thermal environment analysis focusing on the urban ecological park used by many urban citizens, and also suggested the renovation measures for urban ecological park considering the thermal environment. As the research site, the ecologically-favorable Gildong Ecological Pak with diverse space composition was selected. The measuring items were measured and analyzed by dividing them into thermal environment index and thermal comfort index. In the results of analysis in each type of park space, the forest zone showed the most favorable result. Based on such results, total three kinds of renovation measures for urban ecological park considering the thermal environment were suggested. Through this, the urban ecology park renovation plans were presented in three ways. The results of this study are meaningful in that it can be used as a base material for creating an ecological park considering the thermal environment.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.5
• /
• pp.30-36
• /
• 2018

Automotive fuel efficiency regulations and air pollution control are hot issues of recent years in the automotive industry. To solve these regulation problems, many studies are continuing to improve the transmission efficiency of transmissions. Tapered roller bearings are useful to improve the transmission efficiency in the recent automobile parts. The frictional losses in the tapered roller bearings are mainly composed of the rolling friction and the sliding friction, and are dependent upon the load, the lubrication, the rotation speed of bearings, and etc. In this paper, the operating conditions of the transmission are defined and then the power losses of each bearing are calculated. In addition, improvement options are suggested after identifying the design factors influenced much by the improvement effect of power loss under the operating conditions of each bearing. We compare the power losses of the entire transmission system due to bearing improvements by comparing the friction losses between the original design and the improved design. Lastly, it is shown that the calculated power losses are valid by comparing the test values and the theoretical values for the frictional torque characteristics of the original and improved bearings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.21-27
• /
• 2016

Global warming due to greenhouse gas emissions is considered as a major problem worldwide, and many countries are making great efforts to reduce carbon dioxide emissions. Many technologies in post-combustion, pre-combustion and oxy-fuel combustion $CO_2$ capture have been developed. Among them, a hybrid pre-combustion $CO_2$ capture system of a water gas shift (WGS) reactor and a membrane gas separation unit was investigated. The 2 stage WGS reactor integrated high temperature shift (HTS) with a low temperature shift (LTS) was used to obtain a higher CO conversion rate. A Pd/Cu dense metal membrane was used to separate $H_2$ from $CO_2$ selectively. The performance of the hybrid system in terms of CO conversion and $H_2$ separation was evaluated using a 65% CO, 30 % $H_2$ and 5% $CO_2$ gas mixture for applications to pre-combustion $CO_2$ capture. The experiments were carried out over the range of WGS temperatures ($200-400^{\circ}C$), WGS pressures (0-20bar), Steam/Carbon (S/C) ratios (2.5-5) in a feed gas flow rate of 1 L/min. A very high CO conversion rate of 99.5% was achieved with the HTS-LTS 2 stage water gas shift reactor, and 83% $CO_2$ was concentrated in the retentate using the Pd/Cu membrane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.229-235
• /
• 2019

A floating photovoltaic generation system is a new concept that combines existing photovoltaic generation technology with floating technology. This is installed in the water not on conventional land and a building. The system is designed as a unit module type that can be connected to other modules according to the power generation capacity, thereby forming a large-scale power generation facility. As a renewable energy source, it is composed of a floating structure, mooring device, photovoltaic power generation facility, and underwater cable. Because this system is installed outdoors, the effect of the wind load on the structure is very large. In this study, the wind loads most affected on the floating photovoltaic generation structure were obtained by computational fluid dynamic analysis. The flow characteristics and wind loads were analyzed for a range of wind orientations and angles of inclination. The analysis showed the position and magnitude of the maximum wind load to the wind direction and the flow characteristics around the solar panel and floating system. The wind load increased with increasing angle of inclination of the panel to the ground.