• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.423-438
• /
• 2021

The blade of motor grader is used for scattering and leveling the aggregates on the foundation of road construction site. The paper performed a design improvement research of the blade part to enhance the working efficiency of motor graders. The scattering works of aggregates by blade driving were simulated by DEM (discrete element method) of a dynamic code. The four design parameters were selected and a specific leveling scenario for the simulation was determined. The nine blade models were numerically experimented, and the sensitivity of each factors was analyzed. Next, the design factors that influence a blade performance have been selected by ANOVA, and these key design factors were applied to the progressive quadratic response surface method (PQRSM). The optimum set of design factors of the blade was finally proposed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.6
• /
• pp.1040-1046
• /
• 2010

This research is composed of a series of survey of existing plants species by classifying biotope type of agro-ecosystem of Guksoo village area of Yangpyeong County, to collect and analyze basic data of vegetation analysis for indicators development of agro-ecosystem habitat quality. From the observation area, we found total 141 kinds of tracheophytes (53 Family 114 Genus 124 Species 16 Variety 1 Breed) and they are 3.36% of total Korean tracheophytes (4,191 kinds). Among those 141 tracheophytes, there are 23 kinds of naturalized plants (11 Family 20 Genus 20 Species 2 Variety) and they are 8.61% of total Korean naturalized plants (267 kinds). Among those 141 tracheophytes, they include 0.71% of pteridophyte, 0.71% of gymnosperm, 98.58% of angiosperm. So, most of them are angiosperm. When we classify them according to plant life form characteristics, dormant/diapause type plants include 45 species (31.91%) of annual plant (Th), 19 species (13.48%) of Th (w), 17species (12.06%) of hemicryptophyte (H). Regarding propagation type, as for the Radicoid form, there are 99 species (70.21%) of crumb structure plant, 13 species (9.22%) of $R_4$, 12 species (8.51%) of $R_{2.3}$ are the crumb structure does not make any connection on the ground or under ground. As for the Disseminule form of propagation type, there are 62 species (43.97%) of Gravity dispersal type $D_4$), 23 species (16.31%) of Wind dispersal type ($D_1$), 21 species (14.89%) of $D_{1.4}$. According to this survey of plant distribution rate by plant life form characteristics, we may acquire many knowledge about species composition of sociability, cluster's reaction against environmental elements, space usage and possible species competition in community. It may be very useful basic data for habitat preservation to keep and promote biological diversity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.327-334
• /
• 2023

The cultivation period of mung beans (Vigna radiata L.) in Korea has undergone recent variations. However, limited research has been conducted on pod shattering and sprout characteristics of mung beans on different sowing dates. This study aims to compare pod shattering and sprouts productivity based on different sowing dates. The research was was conducted with six different sowing dates (early May, mid-May, early June, mid-June, early July, and mid-July) in 2021 and 2022. Delayed sowing dates resulted in shortened days to germination, flowering time, and maturity time, whereas plant height, branch number, and node number increased. In addition, stem thickness and the number of pods per plant decreased. In the mung bean cultivar 'Sanpo', the pod shattering rate ranged from 10.0% to 19.3%, consistently lower than that of 'Dahyun' across all six sowing dates. The sowing date associated with the lowest shattering rate was early June. 'Sanpo' sown in early July and 'Dahyun' sown in mid-May exhibited the highest sprout production, at 871% and 750%, respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.113-118
• /
• 2009

A designer regards the vibration system as a linear system. However, in real world, nonlinearity of a vibration system should exist caused by various factors like manufacturing conditions or uncertain material properties. So, properties of a spring and a damper which are consisting the vibration system have statistical distribution. Therefore, a designer needs to analyze the statistical nonlinearity in a vibration system. In this paper, $1^{st}$ Taylor series expansion method and univariate dimension reduction method apply to a performance measure of nonlinear vibration system, and compare each result. And then, merits and demerits of each method are discussed. For apply more actual problem, a performance measure population is estimated based on design variable samples like properties of spring or damper.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.647-653
• /
• 2009

Taguchi parameter design is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used SN (Signal to Noise) ratio to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. This paper describes the prediction technique of vehicle performance using parameter analysis to reduce man hour and test development period as well as to achieve stable NVH performance. Design engineer could efficiently decide the design variable using parameter analysis database in early design stage. These improvements can reduce the time needed to develop better vehicles.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.331-335
• /
• 2010

본 논문에서는 위치기반서비스의 핵심기능을 담당하는 측위기술 중 주변의 다양한 잡음환경에서도 다른 측위기술에 비해 비교적 측위오차를 줄일 수 있는 Fingerprint 기법을 적용하여 객체의 위치를 결정하는 방법을 제시하였다. 특히, Fingerprint 기법을 활용함에 있어서 결정적 측위방법이 아닌 확률적 측위방법을 사용하였고, 기존의 연구들에서 제시된 확률적 측위방법에서 인접 RP(Reference Point)들과의 영향성까지 고려한 측위방법을 제시한 것이 본 연구의 특징이다. 비주얼베이직 6.0으로 측위 프로그램을 구현하였고, 실내 외 연속측위의 선행연구로서 실내 측위 테스트를 통해 기존의 결정적 방법, 확률적 방법, 그리고 본 연구에서 제안하는 방법의 측위 정확성을 평가하였다. 테스트 결과, 결정적 측위 방법 및 기존의 확률적 측위방법과 비교하여 각각 평균 15%와 7% 측위 오차가 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.123.2-123.2
• /
• 2010

본 논문에서는 2008년 4월 이후 지열원 열펌프가 설치되어지는 현장에 시험공의 지중열전도도를 현장열응답법을 이용하여 측정하였으며, 그간에 측정된 지중열전도도를 이용하여 전국의 지중온도 및 지중열전도도의 산포도를 정리하였다. 지중열교환기의 심도가 150m일 때 지중온도 분포는 약 $12.0{\sim}19^{\circ}C$의 넓은 분포를 보였으나 대부분의 지중온도가 $15.0{\sim}17.0^{\circ}C$의 범위에 분포하였으며, 지중열전도도의 경우도 마찬가지로 1.50 ~ 9.00 W/mk 값으로 아주 넓은 분포를 보였으나 2.30 ~ 2.90W/mk 값이 가장 많이 나타냈다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.93-96
• /
• 2009

바퀴동력계는 차량에 지면으로부터 전달되는 힘과 모멘트를 측정하는 로드셀이다. 본 연구에서 개발한 바퀴동력계는 스트레인 게이지식 로드셀로써 이러한 로드셀을 설계하는데 있어서 몇가지 고려해야 하는 사항이 있다. 우선 스트레인 게이지를 부착하기 쉬운 구조가 되어야 하고 조립시의 오차를 줄이기 위하여 한 몸체로 제작되어야 한다. 이와 동시에 가장 중요하게 고려되어야 하는 인자로 감도를 위해 재료가 허용하는 응력내에서 되도록 큰 변형률이 발생해야 하고 상호 간섭 오차가 발생하지 말아야 한다. 본 연구에서는 수식을 이용하여 이론적으로 상호 간섭 오차를 0으로 만들 수 있었다. 또한 설계 변수 및 재료 물성치의 산포를 고려한 신뢰성 기반 최적설계 기법을 사용하였으며, 이를 통해 허용 응력하에서 최대의 변형률이 발생하는 바퀴동력계를 설계하였다.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.67-68
• /
• 2013

저가형 저전력 LED 구동회로에서는 종종 직렬 저항을 이용한 전류 밸런스 회로를 사용한다. 이러한 회로에서 밸런싱 저항은 양산시 생기는 LED 순방향 전압의 편차에 관계없이 LED 스트링간의 전류 밸런싱을 유지시키는 역할을 한다. 본 논문에서는 직렬 저항의 공칭값과 공급 전압값을 최적설계 하기위한 효과적인 설계 알고리즘을 제안한다. 제안한 알고리즘은 몬테카를로 기법을 사용하여 순방향 전압의 통계적인 산포와 직렬저항 소자의 상용값 및 공차를 동시에 고려하고, 비용함수를 도입하여 회로 최적화를 진행한다. 기존의 설계 방법 대비 성능 개선 정도를 구체적인 설계사례를 통해 비교 분석함으로써 제안 방법을 검증한다.

• Journal of Korean Society for Quality Management
• /
• v.45 no.2
• /
• pp.209-225
• /
• 2017

Purpose: Since traditional p chart is unable to deal with the variation of attribute data, this paper proposes a new attribute control chart for nonconforming proportions incorporating overdispersion with a beta-binomial model. Methods: Statistical theories for control chart developed under the beta-binomial model and a new approach using this control chart are presented Results: False alarm probabilities of p chart with the beta-binomial model are evaluated and demerits of p chart under overdispersion are discussed from three examples. Hence a concrete procedure for the proposed control chart is provided and illustrated with examples Conclusion: The proposed chart is more useful than traditional p chart, individual chart to treat observed proportions nonconforming as variable data and Laney p' chart.