• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.195-203
• /
• 2012

Recycling method of waste LCD glass is the essential process for developing the total recycling process of LCD pannel. Pulverizing of LCD glass, determination of proper carbonacious foaming agent, the properties of residue from the recovery of valuable materials through an acid leaching process and the feasibility for the foaming of the residue obtained from leaching for indium and tin recovery were investigated for the developing of recycling method of waste LCD glass as industrial feed materials, such as heat insulation materials, sound absorbing materials, carrier of water treatment. Waste LCD glass could be pulverized finely for foaming process. Natural graphite was proper agent for foaming of the residue and the foaming technology of LCD glass would be effective recycling alternatives.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.4
• /
• pp.379-382
• /
• 2000

Conditions of isolation for the red color pigments from the Korean Lithospermum erythrorhizon were investigated and identification of the red pigment was analysed. Non-polar solvents were more effective than water. Especially, 95% ethanol was observed as optimum solvent for the pigments extraction. About 20 minutes at 40$^{\circ}C$ with 95% ethanol was enough for the extraction of the red pigments. The major pigment was analysed as acetylshikonin by TLC, IR, NMR and GC/MS.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.207-216
• /
• 2009

In this study, water quality variation in borehole groundwaters and surface leachate waters were investigated on a seasonal sampling and remote monitoring basis within the waste impoundments at the Geopung mine site where previous rehabilitation measures were unsuccessful to prevent acidic drainage. All groundwaters were typical acidic drainage with acidic pH (3.3${\sim}$4.6) and high TDS (338${\sim}$3330 mg/L) values during the dry season, but increases in metal contents (TDS 414${\sim}$4890 mg/L) and decrease of pH (2.7${\sim}$3.6) were observed during the rainy season. Surface leachate waters showed a similar pattern in water quality variation. Surface runoff waters during rain events had acidic pH (3.0${\sim}$3.4) through direct reactions with waste rocks. Good correlations were found between major and trace elements measured in water samples, but no significant seasonal variation in chemical compositions was shown except relative changes in contents. It can be suggested that dissolution of soluble secondary salts caused by flushing of weathered waste rocks and tailings directly influenced the water quality within the waste impoundments. Increases in acid and metal concentrations and their loadings from mine wastes are anticipated in the rainy season. More appropriate cover systems on waste rocks and tailings necessitate consideration of more extreme conditions in the study mine.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.2
• /
• pp.9-18
• /
• 2003

Sampling of waters from each stage of treatment system (Successive Alkalinity Producing System; SAPS), tailings seepage, and spring near the Hanchang coal mine of Kangwon Province were carried out seasonally and analyzed to evaluate the source and possible path of groundwater contamination by acid mine drainage (AM). Sulfur isotope compositions were measured to identify the origin of groundwater contaminations and the sulfate reduction processes in the SAPS. Low pH and high metal concentration of spring water indicates possibility of the groundwater contamination by AMD. Removal efficiency of acidity of the SAPS was 18.17 g/$\textrm{m}^2$/day on an average and the metal removal efficiency was almost 100%, which was higher than those of other treatment systems. However, no appreciable decrease of sulfur content and almost similar sulfur isotope compositions of water from each stage of the treatment system may suggest incomplete or very poor sulfate reduction by sulfate reducing bacteria. Chemical and sulfur isotope compositions showed that spring water was contaminated by seepage from mine tailings. And seepage of stonewall, a part of treatment system was affected by both tailings seepage and mine adit drainage. In this study site, the treatment system was constructed for the only AMD from mine adit not for tailings seepages, which resulted in the groundwater contamination from tailing seepages. Similar situation is expected in other abandoned coal mine areas.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.588-595
• /
• 2018

This study has focused on evaluation of heavy metal contamination in seepage from 23 mine waste dumping sites in Korea. Seepage samples from the sites were taken and analyzed for heavy metals. The maximum levels (mg/L) in the samples were Al 53.98, As 16.19, Cd 1.15 Cu 37.30, Fe 28.64, Mn 39.00, Ni 0.097, Pb 0.750, and Zn 80.18. Among the sites, six mines were selected as continuous monitoring sites. As results of three months' monitoring of the sites, over the water guidelines for As, Cd, Cu, Fe, Mn, Zn and Al in seepage samples were found at two abandoned Au-Ag mines, Cd, Mn, Zn and Al at two Pb-Zn mines, and As, Fe and Mn at two other Fe-W mines. Therefore, those six mines need continuous monitoring on contamination assessment of seepage due to mining activities.

• Resources Recycling
• /
• v.33 no.4
• /
• pp.36-46
• /
• 2024

We investigated a hydrometallurgical process of nickel recovery from Inconel 713C scrap. The process proceeded with a series of i) comminution of pyrometallurgical treated scrap, ii) sulfuric acid leaching, iii) solvent extraction of unreacted acid, molybdenum, aluminum, and precipitation of chromium, iv) crystallization of nickel sulfate by vacuum evaporation, and v) nickel electrowinning. The nickel-aluminum intermetallic compound, Ni₂Al₃, was formed by the pyrometallurgical pretreatment readily grounded under 75 ㎛. Sulfuric acid leaching was done for 2 hours in 2 mol/L, 20 g/L solid/liquid ratio, and 80 ℃. It revealed that over 98 % of nickel and aluminum was dissolved, whereas 28 % of molybdenum was. A nickel sulfate solution with 2.34 g/L for the crystallization of nickel sulfate hydrate was prepared via solvent extraction and precipitation. Over 99 % of molybdenum and aluminum and 93 % of chromium was removed. Nickel metal with 99.9 % purity was obtained by electrowinning with the nickel sulfate monohydrate in the cell equipped with anion exchange membranes for catholyte pH control. The membrane did not work well, resulting in a low current efficiency of 73.3 %.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.372-376
• /
• 2009

Physicochemical changes in persimmon were examined during natural organic acid fermentation. Major organic acids in raw persimmon juices were lactic acid (980 mg%) and acetic acid (245 mg%). The content of acetic acid was continuously increased during the whole period of fermentation up to 3 years. Glucose was the dominant free sugar, but the content was decreased after 20 days of fermentation. Most of the glucose was converted to ethanol until 40 days after initiation of acid fermentation. L- and a values of Hunter's color in fermented persimmon juice, which was naturally exuded from persimmon fruit as fermentation continued, increased gradually, while b value decreased. Acetic acid (1584 mg%) was the most abundant organic acid followed by lactic acid (712 mg%) and citric acid (48 mg%) in a persimmon fruit juice after completion of 3 year fermentation. A minute amount of residual free sugars, mainly glucose, even after 3 years of fermentation may cause changes in quality characteristics while storage for edible use.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.4
• /
• pp.357-366
• /
• 2007

Microorganisms participate in a variety of geochemical processes such as weathering and formation of minerals, leaching of precious metals from minerals, and cycling of organic matter The objective of this study was to investigate biogeochemical processes of iron leaching from magnetite ore by iron-reducing bacteria isolated from intertidal flat sediments, southwestern part of Korea. Microbial iron leaching experiments were performed using magnetite ore, Shinyemi magnetite ore, in well-defined media with and without bacteria at room temperature for a month. Water soluble Fe and Mn during the leaching experiments were determined by ICP analysis of bioleached samples, and the resulting precipitated solids were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The extent of iron leaching from magnetite in the aerobic conditions (Fe = 15 mg/L and Mn = 3.41 mg/L) was lower than that in the anaerobic environments (Fe = 32.8 mg/L and Mn = 5.23 mg/L). The medium pH typically decreased from 8.3 to 7.2 during a month incubation. The Eh of the initial medium decreased from +144.9 mV to -331.7 mV in aerobic environments and from -2.3 mV to -494.6 mV in anaerobic environments upon incubation with the metal reducing microorganisms. The decrease in pH is due to glucose fermentation producing organic acids and $CO_2$. The ability of bacteria to leach soluble iron from crystalline magnetite could have significant implications for biogeochemical processes in sediments where Fe(III) in magnetite represents the largest pool of electron acceptor as well as to use as a novel biotechnology for leaching precious and heavy metals from raw materials.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.35-48
• /
• 2004

This paper provides a comprehensive overview of geochemical approaches for investigating and assessing heavy metal contamination in abandoned mine sites. Major sources of contaminants at the abandoned mine sites are mine water, waste rocks, tailings, and chemicals used in beneficiation and mineral processing. Soil, sediment, surface and ground water, and ecological system can be contaminated by heavy metals, which are transported due to erosion of mine waste piles, discharge of acid mine drainage and processed water, and dispersion of dust from waste rocks and tailings. The abandoned mine sites should be characterized using various methods including chemical analysis, mineralogical analysis, acid generation prediction tests, leaching/extraction tests, and field tests. Potential and practical environmental impacts from the abandoned mines should be assessed based on the site characterization.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2023

This batch experiment was conducted to investigate the patterns of major plant nutrients in the leachates from the soil that was incorporated with rice hull biochar adjusted pH with dry fish powder utilizing rice hull biochar for loading the soil microorganisms. The rice hull biochar adjusted pH between 6.0 and 7.0, and the mixture ratio of rice hull biochar and dry fish powder was 4:6. The treatments consisted of three; the soil incorporated with rice hull biochar non-adjusted pH with dry fish powder as control (RB + DF), the soil incorporated with rice hull biochar adjusted pH by pyroligneous acid solution and dry fish powder (RBP+DF), and the soil incorporated with rice hull biochar adjusted pH by citric acid solution and dry fish powder (RBC+DF). NH₄-N, NO₃-N, PO₄-P, and K concentrations in the leachates were analyzed during incubation. The accumulated NH₄-N and PO₄-P concentrations in the leachates from the RBC+DF treatment were the highest during leaching periods. The highest accumulated NO₃-N and K concentrations in the leachates from the RBP+DF treatment were observed. It observed that NH₄-N and PO₄-P were more released in the adjusted citric acid solution, but NO₃-N and K were less released than those in the pyroligneous acid solution due to their low absorption capacity. Furthermore, it is necessary to investigate crop growth responses to the soil incorporated with adjusted pH rice hull biochar and dry fish powder for loading soil microorganisms.