• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1050-1059
• /
• 2019

The self diffusion, hole volume, and flow thermodynamic parameters of polyamide fibers were calculated from rheological parameters and crystallite size in order to study of flow segments in amorphous region. The stress relaxation of polyamide filament fibers were carried out in air and various solvents at various temperatures using the tensile tester with the solvent chamber. The rheological parameters were obtained by applying the experimental stress relaxation curves to the theoretical equation of the Ree-Eyring and Maxwell non-Newtonian model. It was observed that the rheological parameters of these polyamide filament fibers are directly related to the relaxation spectra, self diffusion, viscosities, and activation energies of flow segments.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.2
• /
• pp.305-315
• /
• 2014

In a simple linear regression, a linear relationship between an explanatory variable and a response variable can be easily recognized in the scatter plot of them. The lack of fit test for the replicated data is commonly used for testing the linearity but it is not easy to test the linearity when the explanatory variable is not replicated. In this paper, we propose three new test statistics for testing the linearity regardless of replication using the principle of average slope and validate them through several simulations and empirical studies.

• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.198-207
• /
• 1996

To measure the moisture content, protein and viscosity of brown and milled rice with Near Infrared Reflectance(NIR) analyzer, the comparison and analysis of the data from the chemical analysis and NIR analyzer were conducted. The purpose of this study is to find out the fundamental data required for the prediction of rice qualify and taste rank, and to develop a measuring method of constituents and physical characteristics of domestic rice with NIR analyzer. The important results can be summarized as follows. 1. The $r^2$ and SEC of moisture calibration from brown rice powder were 0.87 and 0.09 respectively, those of milled rice powder were 0.95 and 0.08 respectively. 2. The $r^2$ and SEC of protein calibration from brown rice powder were 0.83 and 0.20 respectively, those of milled rice powder were 0.86 and 0.20 respectively. 3. The $r^2$ and SEC of viscosity calibration from brown rice powder were 0.36 and 15.50 respectively, those of milled rice powder were 0.55 and 12.98 respectively. Further study is required to develop better prediction model for viscosity. It is necessary the continuous study including wavelength selection, because $r^2$ is small for practical use. 4. The regression equation for one rice variety was nearly coincident with other. Therefore, it is required that the prediction model should be developed for the all rice samples.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.60-66
• /
• 1993

Aqueous polyurethane(PU) anionomer dispersions were prepared from isophorone diisocyanate (IPDI), polytetramethylene adipate glycol(PTAd) and dimethylol propionic acid(DMPA) as potential anionic centers. The effects of polyol molecular weight(Mn) on the state of dispersion, thermal, mechanical, and viscoelastic properties and swelling of emulsion cast film were determined. With increasing Mn of PTAd, particle size of emulsion and soft segment T$_{g}$ decreased, and solvent swell, emulsion viscosity, and hard segment $T_{g}$ increased. Tensile strength showed minimum with PTAd 1000, and elongation at break generally increased with the Mn of PTAd. These results were possibly nterpreted in terms of soft segment-hard segment phase separation and crystallization of high molecular weight PTAd.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.1
• /
• pp.56-61
• /
• 2002

Porous clay ceramics was fabricated using the surfactant as a foaming agent in the secondary-clay produced at Young-Am area in Chun-Nam province. The concentration of surfactant in ceramic slurry was the key factor controlling the pore characteristics and physical properties of the porous ceramics. The more increase of the surfactant concentration increase the more foaming ability and the stability of foamed layer were improved, but the foaming ability was limited within 6.0 wt% of surfactant because the initial viscosity of the slurry increased with increasing the amounts of surfactant. The formed specimen were sintered at both $1150^{\circ}C$ and $1200^{\circ}C$, the porous ceramics showed 0.9 of specific gravity, 50% of water absorption, 45% of apparent porosity, 14% of shrinkage and 70 kg/$\textrm{cm}^2$ of compressive strength.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.259-272
• /
• 2002

This study was tried to interpret the important major factors controlling some physicochemical properties by comparing mineralogical and physicochemical characteristics such as pH, cation exchange capacity, Methylene Blue adsorption amount, swelling, viscosity, strength (compressional and tensile), and surface area etc. Investigated bentonite samples are five Korean samples from Dusan, Naa, Oksan, Dongyang, and Yeonil deposits and two Japanese bentonites from Tsukinuno and Tomioka deposits which were formed under a similar geological environment of the Tertiary basin. Tsukinuno bentonite is only natural Na-type bentonite and the others are all Ca-type bentonites. Most of the properties are not explained by the montmorillonite content only though the most important factor controlling the physicochemical properties is the montmorillonite content. The layer charge of montmorillonite will strongly control cation exchange capacity and Methylene Blue adsorption. Zeolite bearing bentonites show the strong alkaline character and causes the increase of cation exchange capacity, however decrease swelling, viscosity and strengths. Pyrite bearing bentonites decrease green compressional strength and wet tensile strength. The exchangeable interlayer cations control some physicochemical properties. Na-type bentonite than Ca-type shows more strong alkaline character and much more advanced swelling and viscosity. Also the size and thickness of montmorillonite flakes seem to control some physicochemical properties. Bentonite mainly composed of montmorillonite of very thin and large flakes is characterized by the very high surface area, cation exchange capacity, viscosity, swelling, Methylene Blue adsorption, green compressional strength and wet tensile strength. Domestic Dusan bentonite shows the most excellent physicochemical properties, which is due to the high content(84%) and very well crystallinity of montmorillonite.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.941-947
• /
• 2013

To increase the consumption of frying ginseng, we investigated the physicochemical properties of frying ginseng and different edible oils processed through frying ginseng: soybean oil (SO), corn oil (CO), olive oil (OO), and grape seed oil (GO). We tested various parameters, including temperature (130, 160, 180, and $200^{\circ}C$), frying time (2.0, 2.5, 3.0, and 3.5 min), and frying amount (up to 30 times). The physicochemical properties of the fried ginseng and oils were evaluated for changes in acid value, peroxide value, free fatty acid content, acrylamide formation, color, and viscosity of oils. The acid value and peroxide value of the oils increased with frying temperature and amount. Saturated fatty acids increased and unsaturated fatty acids decreased with the amount of frying, but oleic acid in CO and GO and linoleic acid in OO increased. The concentration of acrylamide in fried ginseng increased as the frying temperature and amount increased and was the lowest in OO. The lightness and redness of the frying oil color decreased and its yellowness increased in SO and CO, but the lightness increased (redness and yellowness decreased) in OO. In particular, CO was significantly browned with increasing frying amounts. The viscosity of the frying oils increased with frying amount, with CO showing the lowest increases in viscosity of the oils. As a result, the optimal ginseng frying condition found was 2 min 30 sec at $180^{\circ}C$, regardless the type of oils.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.1
• /
• pp.29-36
• /
• 1985

In the previous papers (Kim and Park, 1984 a, b), we have reported on alginic acid from Ecklonia cava. The seasonal and portional variation in the composition of uronic acids and their block structures of alginic acid from Sargassum ringgoldianum (collected from Ichon-ri at the coast of Ilgwang-myon, Yangsan-gun, Kyongnam, Korea, in the period of January to December in 1982) are investigated, and their relationship between the chemical composition and some rotated properties is discussed in this study. The results are as follows: 1. One year average contents of alginic acid were $21.4\%$ in the stipe and $19.7\%$ in the frond, one-year average values of M/G ratios were 2.38 in the frond and 1.85 in the stipe. The value of frond was largest in the period of Jauuary to April and smallest in May and October to December. The value of stipe was largest January to April and smallest in May. In general, the proportions of M block in the both of frond and stipe were higher than those of G block. 2. The viscosity of frond alginic acid showed higher values of 31.1 cP in November, and lower (below 7.0 cP) in the stipe alginic acid. Furthermore, the dependence on temperature of frond alginic acid was also larger in November and others were lower. Ion exchange ability of frond alginic acid was highest in July and the exchange amounts were $Pb^{2+}\;5.2,\;Cu^{2+}\;3.1,\;Zn^{2+}\;1.7,\;Co^{2+}\;1.5$ meq/g, Na-Alg., and the ability of stipe alginic acid was highest in May and the amounts were $Pb^{2+}\;4.6,\;Cu^{2+}\;3.3,\;Zn^{2+}\;2.5,\;Co^{2+}\;1.4$ meq/g. Na-Alg.. The affinity with metallic ions appeared higher in order of $Pb^{2+}>Cu^{2+}>Zn^{2+}>Co^{2+}$, and the exchange ability assumed to relate with the block ratio of uronic acid.

• Journal of Life Science
• /
• v.7 no.2
• /
• pp.142-148
• /
• 1997

This study was carried out to clarify seasonal changes of chemical compositions and their interrelation in leaves, shoots and berries treated with gibberellin($GA$_{3}$)for seedless grapes in ‘Delaware’grapevines. the clusters were dipped twice with 100ppm $GA_{3}$: 10 days befor and after the full bloom. The reaults obtained as follows; 1. Cumulative growth curve of berry fresh weight showed a double sigmoid curve and the characteristics of three distinctive growth stages(I, II, III)were weekened with $GA_{3}$ treatment. 2. while the contents of ash, total carbon, total nitrogen and total carbohydratd had little reation with edvelopment and ripeness of berries, those of total sugar and starch jad close relation, viz., they decreased with enlargement and maturity fo berries, but increased rapidly after harvest in leaves and shoots. Especially, total sugars in leaves and shoots decreased coincidently with starch-increasing in shoots at November. 3. The contents of total soluble solid and reducing sugar in berries increased rapidly at growth stage III, but those of total titratable acidity and organic acid decreased coincidently with sugar-increasing. 4. The berry-hardness increased until growth stage I, and then stagnated until gtowth stage II, and then increased rapidly at growth stage III. pH of berry-juice decreased until growth stageII, afterwards increased at growth stage III. 5. By correlation and path coefficient analysis between qualitative characters and the ratio of total soluble solid to titratable acidity($^{\circ}$Brix/Acidity), total correlation coefficients were all highly significant. Of these characters, pH and viscosity of berry-juice were positive, but brightness and hardness of berry, negative. The direct effect of pH on $^{\circ}$Brix/Acidity ratio, p4y=0.9090, was large positively and those of berry-hardness and juice-viscosity, p1y=0, 5938, median and, p2y=0, 3550, small, respectively. Direct effect of brightness was negatively small.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.346-354
• /
• 2011

This study was carried out to fortify the antimicrobial activity of yoghurt by adding liquorice extract to it. The liquorice extracts (1 mg/mL) showed relatively high antibacterial activity against H. pylori KCCM 40449 (p < 0.05). The solvent liquorice extracts of minimal inhibitory concentrations (MIC) against H. pylori KCCM 40449 were 25- 100 ${\mu}g$/mL. Lactobacillus amylovorus DU-21 with high EPS production ability were inoulated to milk after the addition of different amounts of liquorice extracts (0.0%, 0.05%, 0.1% and 0.2%). The physico-chemical characteristics of yoghurts added with liquorice extracts were examined. The initial pH, titratable acidity, viscosity and viable cell counts of the yoghurt added liquorice extracts were 3.41-3.51, 1.021-1.091%, 1,686-1,930 cp and 9.41-9.38 Log CFU/mL, respectively. The viscosity and syneresis of yoghurt were better than that of the control. Antimicrobial activity against H. pylori KCCM 40449 increased with increasing addition of liquorice extract. However, the sensory score of yoghurt added with different amounts of liquorice extracts was lower than that of the control (p < 0.05). As a result of the sensory evaluations, the flavor, taste, texture, color and overall acceptability of the yoghurt with 0.05% liquorice extract were found to be much better than those of the other groups (p < 0.05). Overall, the optimal amount of liquorice extract added in the manufacture of yoghurt was 0.05% of the total weight. Further studies on increment of antimicrobial activity and palatability of liquorice extract added yoghurt are necessary.