• Resources Recycling
• /
• v.24 no.2
• /
• pp.69-78
• /
• 2015

Recently, the importance of efficient resource management has been highlighted due to the uncertainty of its security. Developed countries promote the legislative provision and transition of industrial structure to maximize the efficiency of resource use through supporting the sustainable resource management at national level. Meanwhile Korea has very sensitive industrial structure along with the international resource supply and demand conditions. It is acutely necessary to improve the resource productivity with the various action plans such as the increase of recycling rate and the establishment of methodical resource management system. Especially, the study on the direction of each flow stage and the concrete action plans for using resource efficiently in the life-cycle of resource will be required. Therefore, this study suggests the future direction of each flow stage(production stage and circulatory stage), and the concrete action plans to improve the present problems of resource management in Korea.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.3
• /
• pp.252-258
• /
• 2014

With the vision of 'a low carbon green develop' various industrial by-products were used as replacement of cement, in order to reduce $CO_2$ emissions from the manufacturing process of cement. Blast furnace slag is one of the industrial by-products. Due to the similar chemical compositions to ordinary Portland cement, blast furnace slag have been widely used in concrete with minimum side effects. Hence, in recent years, alkali activated slag-based composites are extensively studied by many researchers. However, the alkali activator can cause a number of problems in practice. Therefore, in this study, an alternative way of activating the slag was investigated. To activate the slag without using an alkali activator, calcium sulfate dihydrate was chosen and mixed with natural recycled fine aggregate. Fundamental properties of the slag-based mortar were tested to evaluate the effect of calcium sulfate dihydrate.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.171-179
• /
• 2015

Recently, development of substitution aggregate is urgently needed because aggregate shortage is continuing due to the exhaustion of natural aggregate and strict restrictions of environment in construction industry. Therefore, In this study, new processing method to solve the problems of processing method of existing converter slag, namely, rapid cooling slag produced by the rapid cooling and crushing process of the high temperature melten slag into the rotary drum and then using the cooling water, compressed air and steel ball was examined fundamental properties for utilize as fine aggregate for concrete. In addition, through this study, we propose the utilization method of rapid cooling slag as fine aggregate for concrete.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.413-422
• /
• 2019

A ferrosilicon (FS) by-product was applied into a cementitious binder in concrete substituting the ordinary Portland cement (OPC). The original material characteristic of FS is very identical to silica fume (SF) regarding chemical composition and physical properties such as specific surface area and specific gravity. Therefore, the FS and SF concrete or mortal of which 10% of the material was replaced to total binder weight were fabricated to evaluate the feasibility of using F S as a binder, and the comparative information of OPC, FS and SF concrete was given. The hydration characteristic of FS concrete was analyzed using X-ray diffraction analysis. The FS concrete was beneficial in compressive strength, resistivity against chloride ingress and reducing porosity considering performance of OPC concrete but the advantage was less than using SF. A possibility of alkali-silica expansion was found out from the FS concrete due to the agglomerated size of the silica particles.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.319-323
• /
• 2018

Ferronickel slag is a by-product from the ferronickel smelting process and it is divided into air-cooled ferronickel slag and water granulated ferronickel slag according to cooling system. The purpose of this experimental resesrch is to investigate the mechanical properties and resistance to freezing and thawing of concrete using air-cooled ferronickel slag(ACFNS) fine aggregate. For this purpose, the concrete specimens with water-cement ratio of 50% were made with ACFNS's replacement ratios of 0%, 20%, 30%, 40%, 50%, 70%, and 100% by volume of fine aggregate. It was observed from the test results that the compressive strength and static modulus of elasticity of ACFNS fine aggregate concrete were increased with increasing replacement ratio of ACFNS and the resistance to freezing and thawing of this was similar to reference concrete which had the relative dynamic modulus of elasticity of more than 90% during the freezing and thawing of 300 cycles.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.74-81
• /
• 2019

In this study, to characterize the application of CSA and dihydrate gypsum Utilizing industrial byproducts, we investigated the characteristics of CSA and dihydrate gypsum to investigate the characteristics of Mine Liner according to the addition amount. As a result of compressive strength, length change and absorption rate of mining lime wastewater according to CSA addition amount, up to 30% of CSA showed a positive effect on shrinkage and absorption reduction effect as well as strength at initial age. However, due to excessive use of CSA 50%, it was reduced by 15% compared to OPC due to increase of absorption rate and decrease of cement amount due to over expansion rather than shrinkage compensation and void filling.

• Korean Journal of Labor Studies
• /
• v.17 no.1
• /
• pp.269-295
• /
• 2011

This paper is about the part-time work and related polices in Netherland, which increased the employment rate for the past 30 years with part-time job creation. Netherland has been successful in making part-time 'good' jobs. There were many factors which contributed to increaing part-time jobs such as market, institution, policies, and industrial relations. There was virtuous cycle between increase in the supply of female labor power and increase in the demand for part-time worker in the labor market. The policies were reinforced which protect part-time workers, introduced the incentive system which was favorable to part-time wokres, guaranteed the right to select working hours to workers. Particularly, the labor market, institutions and policies were created in the midst of the social dialogue. As the polder model has been persisted for almost 30 years, the switch to full-time work or long working-hour model would not be possible. As the poler model is a very specific model based on the Netherland's own social conditions, it is not easy to copy and transplant in other countries.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.92-99
• /
• 2021

CaO-based by-products composed of CaO, SO3, Al2O3, etc. are generally used as raw materials for CaO compounds. When applied to the recovered water of ready-mixed concrete, the hydration reaction of the powder material is accelerated and concrete performance can be improved. In this study, activated sludge was prepared to apply to the recovered water of ready-mixed concrete by mixing CaO-based hot-rolled slag(C12A7) in the recycling water of ready-m ixed concrete. Cem ent paste setting time and mortar compressive strength performance tests confirmed the effect on the hydration reaction. Therefore, the possibility of concrete application using activated sludge was confirmed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.25-31
• /
• 2023

In this study, the basic properties of CO₂ immobilized desulfurized gypsum (CFBG) and the possibility of being used as a stimulus for slag cement were reviewed, and performance evaluation was conducted through a concrete mixing test. The main components of CFBG were CaO and SO₃, and CaO and SO₃ increased as the drying temperature increased. The moisture content of undried CFBG was 15.7 %, the drying temperature was 1.7 % and the drying temperature was 0.03 % at 105 ℃. Mortar using CFBG tended to have a lower flow value as the drying temperature increased, and the compressive strength was equivalent to that of the FGB use mixture. As a result of the concrete experiment using CFBG SC, both slump and air volume satisfied the target range after 60 minutes, and the compressive strength tended to increase overall compared to the ternary binder mixture.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.48-54
• /
• 2023

In this research, The basic physical properties and EMP shielding performance by thickness were evaluated for optimum composition of EMP shield concrete that can be applied on-site by mixing carbon-based materials with high conductivity into concrete that uses electric furnace oxidized slag (EOS). As a result of the evaluation, it was confirmed that the slump decreased as the amount of mixed carbon fib er (CF) increased, and increased when milled carb on (MCF) was mixed. As for the compressive strength, it was confirmed that EOS enhanced the strength compared to NA, and it was confirmed that the strength decreased when CF and MCF were mixed. As the thickness of the EMP shielding measurement increases, the shielding rate increases, and it was confirmed that the type of conductive material and the thickness of the test specimen have a greater influence on the shielding rate than the Amount of conductive material added. As a result of a comparative evaluation, EOS CF 0.2 is considered suitable for EMP shield concrete formulation.