• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.440-453
• /
• 2019

This study was carried out to investigate the effect of watching a two-dimensional (2D) forest video and a virtual reality (VR) forest video on stress reduction in adults. Experiments were conducted in an artificial climate room, and 40 subjects participated. After inducing stress in the subjects, subjects watched a 2D gray video, 2D forest video, or VR forest video for 5 mins. The autonomic nervous system activity was evaluated continuously in terms of measured heart rate variability during the experiment. After each experiment, the subject's psychological state was evaluated using a questionnaire. The 2D forest video decreased the viewer's stress index, increased HF, and reduced heart rate compared with the 2D gray video. The VR forest video had a greater stress index reduction effect, LF/HF increase effect, and heart rate reduction effect than the 2D gray video. Psychological measurements showed that subjects felt more comfortable, natural, and calm when watching the 2D gray video, 2D forest video or VR forest video. We also found that the 2D forest video and VR forest video increased positive emotions and reduced negative emotions compared to the 2D gray video. Based on these results, it can be concluded that watching the 2D forest and VR forest videos reduces the stress index and heart rate compared with watching the 2D gray video. Thus, it is considered that the 2D forest video increases the activity of the parasympathetic nervous system, and the VR forest video increases the activity of the sympathetic nervous system. The increased activity of the sympathetic nervous system upon watching the VR forest video is judged to be positive sympathetic nerve activity, such as novelty and curiosity, and not negative sympathetic activity, such as stress and tension. The results of this study are expected to be the basis for examining the visual effects of forest healing, with hope that the utilization of VR, the technology of the fourth industrial revolution in the forestry field, will broaden.

• Journal of Intelligence and Information Systems
• /
• v.25 no.1
• /
• pp.139-161
• /
• 2019

The utilization of the e-commerce market has become a common life style in today. It has become important part to know where and how to make reasonable purchases of good quality products for customers. This change in purchase psychology tends to make it difficult for customers to make purchasing decisions in vast amounts of information. In this case, the recommendation system has the effect of reducing the cost of information retrieval and improving the satisfaction by analyzing the purchasing behavior of the customer. Amazon and Netflix are considered to be the well-known examples of sales marketing using the recommendation system. In the case of Amazon, 60% of the recommendation is made by purchasing goods, and 35% of the sales increase was achieved. Netflix, on the other hand, found that 75% of movie recommendations were made using services. This personalization technique is considered to be one of the key strategies for one-to-one marketing that can be useful in online markets where salespeople do not exist. Recommendation techniques that are mainly used in recommendation systems today include collaborative filtering and content-based filtering. Furthermore, hybrid techniques and association rules that use these techniques in combination are also being used in various fields. Of these, collaborative filtering recommendation techniques are the most popular today. Collaborative filtering is a method of recommending products preferred by neighbors who have similar preferences or purchasing behavior, based on the assumption that users who have exhibited similar tendencies in purchasing or evaluating products in the past will have a similar tendency to other products. However, most of the existed systems are recommended only within the same category of products such as books and movies. This is because the recommendation system estimates the purchase satisfaction about new item which have never been bought yet using customer's purchase rating points of a similar commodity based on the transaction data. In addition, there is a problem about the reliability of purchase ratings used in the recommendation system. Reliability of customer purchase ratings is causing serious problems. In particular, 'Compensatory Review' refers to the intentional manipulation of a customer purchase rating by a company intervention. In fact, Amazon has been hard-pressed for these "compassionate reviews" since 2016 and has worked hard to reduce false information and increase credibility. The survey showed that the average rating for products with 'Compensated Review' was higher than those without 'Compensation Review'. And it turns out that 'Compensatory Review' is about 12 times less likely to give the lowest rating, and about 4 times less likely to leave a critical opinion. As such, customer purchase ratings are full of various noises. This problem is directly related to the performance of recommendation systems aimed at maximizing profits by attracting highly satisfied customers in most e-commerce transactions. In this study, we propose the possibility of using new indicators that can objectively substitute existing customer 's purchase ratings by using RFM multi-dimensional analysis technique to solve a series of problems. RFM multi-dimensional analysis technique is the most widely used analytical method in customer relationship management marketing(CRM), and is a data analysis method for selecting customers who are likely to purchase goods. As a result of verifying the actual purchase history data using the relevant index, the accuracy was as high as about 55%. This is a result of recommending a total of 4,386 different types of products that have never been bought before, thus the verification result means relatively high accuracy and utilization value. And this study suggests the possibility of general recommendation system that can be applied to various offline product data. If additional data is acquired in the future, the accuracy of the proposed recommendation system can be improved.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.345-353
• /
• 2022

A wastewater treatment plant (WWTP) is a major gateway for the engineered nano-particles (ENPs) entering the water bodies. However existing studies have reported that many WWTPs exceed the No Observed Effective Concentration (NOEC) for ENPs in the effluent and thus they need to be designed or operated to more effectively control ENPs. Understanding and predicting ENPs behaviors in the unit and \the whole process of a WWTP should be the key first step to develop strategies for controlling ENPs using a WWTP. This study aims to provide a modeling tool for predicting behaviors and removal efficiencies of ENPs in a WWTP associated with process characteristics and major operating conditions. In the developed model, four unit processes for water treatment (primary clarifier, bioreactor, secondary clarifier, and tertiary treatment unit) were considered. Additionally the model simulates the sludge treatment system as a single process that integrates multiple unit processes including thickeners, digesters, and dewatering units. The simulated ENP was nano-sized TiO₂, (nano-TiO₂) assuming that its behavior in a WWTP is dominated by the attachment with suspendid solids (SS), while dissolution and transformation are insignificant. The attachment mechanism of nano-TiO₂ to SS was incorporated into the model equations using the apparent solid-liquid partition coefficient (Kd) under the equilibrium assumption between solid and liquid phase, and a steady state condition of nano-TiO₂ was assumed. Furthermore, an MS Excel-based user interface was developed to provide user-friendly environment for the nano-TiO₂ removal efficiency calculations. Using the developed model, a preliminary simulation was conducted to examine how the solid retention time (SRT), a major operating variable affects the removal efficiency of nano-TiO₂ particles in a WWTP.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.12-28
• /
• 2021

Based on the global smart city promotion trend, in 2018, the "Fourth Industrial Revolution Committee" selected "sustainability" and "people-centered" as keywords in relation to the direction of domestic smart city policy. Accordingly, the Living Lab program, which is an active citizen-centered innovation methodology, is applied to each stage of the domestic smart city construction project. Through the Living Lab program, and in collaboration with the public and experts, the smart city discovers local issues as it focuses on citizens, devises solutions to sustainable urban problems, and formulates a regional development plan that reflects the needs of citizens. However, compared to citizen participation in urban regeneration projects that have been operated for a relatively long time, participation in smart city projects was found to significantly differ in level and sustainability. Therefore, this study conducted a comparative analysis of the characteristics of citizen participation at each stage of an urban regeneration project and, based on Arnstein's "Participation Ladder" model, examined the level of citizen participation activities in the Living Lab program carried out in a smart city commercial area from 2018 to 2019. The results indicated that citizen participation activities in the Living Lab conducted in the smart city project had a great influence on selecting smart city services, which fit the needs of local residents, and on determining the technological level of services appropriate to the region based on a relatively high level of authority, such as selection of smart city services or composition of solutions. However, most of the citizen participation activities were halted after the project's completion due to the one-off recruitment of citizen participation groups for the smart city construction project only. On the other hand, citizens' participation activities in the field of urban regeneration were focused on local communities, and continuous operation and management measures were being drawn from the project planning stage to the operation stage after the project was completed. This study presented a plan to revitalize citizen participation for the realization of a more sustainable smart city through a comparison of the characteristics and an examination of the level of citizen participation in such urban regeneration and smart city projects.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.6
• /
• pp.67-79
• /
• 2020

This study analyzed the start-up education curriculum and start-up education programs of seven universities in the U.S. to find out what courses are provided, what various programs exist, and what the characteristics of start-up education in each university are. California State University, San Bernardino / University of California, Irvine / Drexel University / Oklahoma State University / Florida State University / San Diego State University / University of Southern California where entrepreneurship education based on the Entrepreneurship Degree Course is being established based on the Entrepreneurship Center of seven universities in the United States, which is not well introduced in Korea. This study examined how the start-up education courses and start-up support systems at seven universities in the U.S. are progressing at the undergraduate, MBA, master's and doctoral levels, and comparative levels. Through the case studies of the universities presented, the primary analysis was carried out to explore the various characteristics of American university start-up education. The implications of start-up education at American universities in this study are as follows. First, in order for universities to take the initiative in providing start-up education, they should be organized to suit the course of start-up education suitable for the characteristics of universities and introduce support programs. Second, it is necessary to establish an independent center within domestic universities to be operated autonomously. Third, the start-up education of universities should include building university-industry partnerships, operating entrepreneurship degree courses and collaboration between departments of universities. Fourth, the independent center should lead the active participation of alumni and local start-ups and start-up-related programs should be operated based on this. Fifth, Differentiated programs for each university's characteristics should be introduced and applied to universities. Although case studies have limitations that cannot be generalized, they can provide a useful framework. Therefore, it is necessary to design a systematic start-up education that reflects the correct design direction and characteristics of each university.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.207-235
• /
• 2022

In a knowledge-based society where knowledge and information industries are the main pillars of the economy, knowledge sharing and diffusion and its systematic management are recognized as essential strategies for improving national competitiveness and sustainable social development. In the field of Information Systems (IS) research, where the convergence of information technology and management takes place in various ways, the evolution of knowledge occurs only when researchers cooperate in turning old knowledge into new knowledge from the perspective of the scientific knowledge network. In particular, it is possible to derive new insights by identifying topics of interest in the relevant research field, applied methodologies, and research trends through network-based interdisciplinary graftings such as citations, co-authorships, and keywords. In previous studies, various attempts have been made to understand the structure of the knowledge system and the research trends of the relevant community by revealing the relationship between research topics, methodologies, and co-authors. However, most studies have compared two or more journals and been limited to a certain period; hence, there is a lack of research that looked at research trends covering the entire history of IS research. Therefore, this study was conducted in the following order for all the papers (from its first issue in 1977 to the first quarter of 2022) published in the MIS Quarterly (MISQ) Journal, which plays a leading role in revealing knowledge in the IS research field: (1) After extracting keywords, (2) classifying the extracted keywords into research topics, methodologies, and theories, and (3) using topic modeling and keyword network analysis in order to identify the changes from the beginning to the present of the IS research in a chronological manner. Through this study, it is expected that by examining the changes in IS research published in MISQ, the developing patterns of IS research can be revealed, and a new research direction can be presented to IS researchers, nurturing the sustainability of future research.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.202-217
• /
• 2022

Purpose: The recent increased use of Personal Mobility (PM) has been accompanied by a rise in the annual number of accidents. Accordingly, the safety requirements for PM use are being strengthened, but the laws/systems, infrastructure, and management systems remain insufficient for fostering a safe environment. Therefore, this study comprehensively searches the main problems and improvement methods through a review of previous studies that are related to PM. Then the priorities according to the importance of the improvement methods are presented through the Delphi survey. Method: The research method is mainly composed of a literature study and an expert survey (Delphi survey). Prior research and improvement cases (local governments, government departments, companies, etc.) are reviewed to derive problems and improvements, and a problem/improvement classification table is created based on keywords. Based on the classification contents, an expert survey is conducted to derive a priority improvement plan. Result: The PM-related problems were in 'non-compliance with traffic laws, lack of knowledge, inexperienced operation, and lack of safety awareness' in relation to human factors, and 'device characteristics, road-drivable space, road facilities, parking facilities' in relation to physical factors. 'Management/supervision, product management, user management, education/training' as administrative factors and legal factors are divided into 'absence/sufficiency of law, confusion/duplication, reduced effectiveness'. Improvement tasks related to this include 'PM education/public relations, parking/return, road improvement, PM registration/management, insurance, safety standards, traffic standards, PM device safety, PM supplementary facilities, enforcement/management, dedicated organization, service providers, management system, and related laws/institutional improvement', and 42 detailed tasks are derived for these 14 core tasks. The results for the importance evaluation of detailed tasks show that the tasks with a high overall average for the evaluation items of cost, time, effect, urgency, and feasibility were 'strengthening crackdown/instruction activities, education publicity/campaign, truancy PM management, and clarification of traffic rules'. Conclusion: The PM market is experiencing gradual growth based on shared services and a safe environment for PM use must be ensured along with industrial revitalization. In this respect, this study seeks out the major problems and improvement plans related to PM from a comprehensive point of view and prioritizes the necessary improvement measures. Therefore, it can serve as a basis of data for future policy establishment. In the future, in-depth data supplementation will be required for each key improvement area for practical policy application.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.127-135
• /
• 2021

To respond to the threat of global warming, countries around the world are promoting the spread of renewable energy and reduction of carbon emissions. In accordance with the United Nation's Sustainable Development Goal to combat climate change and its impacts, global automakers are pushing for a full transition to electric vehicles within the next 10 years. Electric vehicles can be a useful means for reducing carbon emissions, but in order to reduce carbon generated in the stage of producing electricity for charging, a power generation system using eco-friendly renewable energy is required. In this study, we propose a smart electric mobility operating system integrated with off-grid solar power plants established in Tanzania, Africa. By applying smart monitoring and communication functions based on Arduino-based computing devices, information such as remaining battery capacity, battery status, location, speed, altitude, and road conditions of an electric vehicle or electric motorcycle is monitored. In addition, we present a scenario that communicates with the surrounding independent solar power plant infrastructure to predict the drivable distance and optimize the charging schedule and route to the destination. The feasibility of the proposed system was verified through test runs of electric motorcycles. In considering local environmental characteristics in Tanzania for the operation of the electric mobility system, factors such as eco-friendliness, economic feasibility, ease of operation, and compatibility should be weighed. The smart electric mobility operating system proposed in this study can be an important basis for implementing the SDGs' climate change response.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.

• Journal of Service Research and Studies
• /
• v.13 no.2
• /
• pp.82-98
• /
• 2023

This study investigates consumers' perceptions when customers participate in the process of innovating new products or new services essential to companies in the era of the 4th industrial revolution. Specifically, this study investigates how consumers' product evaluation varies depending on two types of innovation for a company's new product development (technology-based innovation and market-based innovation) and two customer roles (as information providers and as co-developers) participated in the development process. The research questions are as follows: As technology-based innovation and market-based innovation are different types of innovations, will consumers' product evaluation vary depending on these different types of innovation? If customers participate in the development process of a new product reflecting each innovation, how will the information that the customer participated be perceived by other consumers? In addition, this customer participation method can serve as an information provider and a co-developer, and will consumers' evaluation of new products vary depending on this role? As a result of verifying the hypothesis using an experimental method, it shows that consumers' product evaluation differs significantly depending on the role of customers who participated in the process of developing new product development process. In other words, the results indicate that the case where customers participated as market information providers in the process of developing new products is more favorable to the new product evaluation than the case where they participated as co-developers of the new products. In addition, there is an interaction effect between the type of product innovation and the role of customer participation. To be specific, when a product reflecting technological innovation is released, there is no difference in consumers' product evaluation according to the roles of two different customer participations. However, when a market-based innovation product is released, product evaluation is more favorably perceived when customers participated as information providers than they were involved in the new product development process as co-developers. This study is of theoretical significance in that it distinguishes each type of innovation and verified how other consumers' perceptions vary depending on their role when customers participate in the innovation process. Finally, limitations and future study directions are suggested along with practical implications.